From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stan Hoeppner Subject: Re: RAID6 reshape, 2 disk failures Date: Thu, 18 Oct 2012 06:56:02 -0500 Message-ID: <507FEE52.50103@hardwarefreak.com> References: <235A81EB-2E6D-45AD-9175-29ABA1628632@colorremedies.com> Reply-To: stan@hardwarefreak.com Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: linux-raid-owner@vger.kernel.org To: linux-raid RAID List-Id: linux-raid.ids On 10/17/2012 2:03 PM, Mathias Bur=E9n wrote: > There are no CRC errors so I doubt the cable is at fault. In any way, > I've RMA'd drives for less, and an RMA is underway for this drive. > Just need to wait for the reshape to finish so I can get in the > server. Btw, with a few holes drilled this bad boy holds 7 3.5" HDDs > no problem: http://www.antec.com/productPSU.php?id=3D30&pid=3D3 It would seem you didn't mod the airflow of the case along with the increased drive count. The NSK1380 has really poor airflow to begin with: a single PSU mounted 120mm super low RPM fan. Antec is currently shipping the NSK1380 with an additional PCI slot centrifugal fan to hel= p overcome the limitations of the native design. You bought crap drives, WD20EARS, then improperly modded a case to hous= e more than twice the design limit of HDDs. I'd say you stacked the deck against yourself here Mathias. --=20 Stan -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html