From: Phil Turmel <philip@turmel.org> To: "stone@heisl.org" <stone@heisl.org> Cc: linux-raid <linux-raid@vger.kernel.org> Subject: Re: Brocken Raid & LUKS Date: Thu, 21 Feb 2013 10:04:37 -0500 [thread overview] Message-ID: <51263785.2010001@turmel.org> (raw) In-Reply-To: <51262CE0.3000809@heisl.org> On 02/21/2013 09:19 AM, stone@heisl.org wrote: > o greate idea :) Whoops! Not a great idea. This is a member device. > but i dont get a good result > fsck -n /dev/sdc1 > fsck from util-linux 2.20.1 > fsck: fsck.linux_raid_member: not found > fsck: error 2 while executing fsck.linux_raid_member for /dev/sdc1 > > fsck -n /dev/md2 > fsck from util-linux 2.20.1 > e2fsck 1.42 (29-Nov-2011) > fsck.ext2: Superblock invalid, trying backup blocks... > fsck.ext2: Bad magic number in super-block while trying to open /dev/md2 > > The superblock could not be read or does not describe a correct ext2 > filesystem. If the device is valid and it really contains an ext2 > filesystem (and not swap or ufs or something else), then the superblock > is corrupt, and you might try running e2fsck with an alternate superblock: > e2fsck -b 8193 <device> Ignore this. As long as badblocks was using 4096, then the dd command is correct. Phil
next prev parent reply other threads:[~2013-02-21 15:04 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-19 16:01 Brocken Raid & LUKS stone
2013-02-19 17:57 ` Phil Turmel
[not found] ` <5123E4E9.3020609@heisl.org>
2013-02-19 21:16 ` Phil Turmel
[not found] ` <5123EF45.6080405@heisl.org>
[not found] ` <5123F7C7.7000406@turmel.org>
[not found] ` <5123FB71.3060509@heisl.org>
2013-02-20 0:31 ` Phil Turmel
2013-02-20 18:32 ` Stone
2013-02-20 18:39 ` Phil Turmel
2013-02-21 7:04 ` Stone
2013-02-21 9:42 ` stone
2013-02-21 13:29 ` Phil Turmel
2013-02-21 14:19 ` stone
2013-02-21 15:04 ` Phil Turmel [this message]
2013-02-21 15:30 ` stone
2013-02-21 15:38 ` Phil Turmel
2013-02-21 15:49 ` Phil Turmel
2013-02-21 16:32 ` Stone
2013-02-21 16:41 ` Phil Turmel
2013-02-21 16:43 ` Stone
2013-02-21 16:46 ` Phil Turmel
2013-02-21 16:51 ` Stone
2013-02-21 16:54 ` Phil Turmel
2013-02-21 17:17 ` Stone
2013-02-21 17:23 ` Stone
2013-02-21 17:36 ` Phil Turmel
2013-02-21 17:47 ` Stone
2013-02-21 18:00 ` Phil Turmel
2013-02-21 18:08 ` Stone
2013-02-21 18:11 ` Phil Turmel
2013-02-21 18:29 ` Stone
2013-02-21 18:54 ` Phil Turmel
2013-02-21 19:12 ` Stone
2013-02-21 19:17 ` Stone
2013-02-21 19:24 ` Phil Turmel
2013-02-21 19:29 ` Stone
2013-02-21 19:45 ` Phil Turmel
2013-02-21 19:46 ` Stone
[not found] ` <51269DE0.5070905@heisl.org>
2013-02-22 10:31 ` stone
2013-02-22 13:53 ` Phil Turmel
2013-02-22 14:58 ` Stone
2013-02-22 15:37 ` Phil Turmel
2013-02-22 18:17 ` Stone
2013-02-22 18:23 ` Phil Turmel
2013-02-22 20:43 ` Stone
2013-02-22 22:35 ` Phil Turmel
2013-02-22 22:42 ` Stone
2013-02-23 2:22 ` Phil Turmel
2013-02-23 3:11 ` Stone
2013-02-23 4:36 ` Phil Turmel
2013-02-23 10:19 ` Stone
2013-02-23 16:10 ` Phil Turmel
2013-02-23 22:26 ` Stone
2013-02-23 23:49 ` Phil Turmel
2013-02-24 0:13 ` Stone
2013-02-24 4:04 ` Phil Turmel
2013-02-24 7:10 ` Stone
2013-02-24 14:15 ` Phil Turmel
2013-02-24 18:22 ` Stone
2013-02-24 18:33 ` Phil Turmel
2013-02-24 19:23 ` Stone
2013-02-24 19:51 ` Phil Turmel
2013-02-24 20:15 ` Stone
2013-02-24 20:25 ` Phil Turmel
2013-02-24 20:38 ` Stone
2013-02-24 20:44 ` Phil Turmel
2013-02-24 20:47 ` Stone
2013-02-25 9:06 ` stone
2013-02-25 18:31 ` Stone
2013-02-25 20:11 ` Stone
2013-02-26 0:19 ` Phil Turmel
2013-02-27 7:26 ` Stone
2013-02-27 19:04 ` Stone
2013-02-27 19:33 ` Hans-Peter Jansen
2013-02-27 19:51 ` Stone
2013-03-02 17:13 ` Phil Turmel
[not found] ` <5127B0AB.5040108@heisl.org>
2013-02-22 18:30 ` Phil Turmel
2013-02-21 22:29 ` Chris Murphy
2013-02-21 22:34 ` Phil Turmel
2013-02-21 22:20 ` Chris Murphy
2013-02-21 22:26 ` Phil Turmel
2013-02-21 13:15 ` Phil Turmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51263785.2010001@turmel.org \
--to=philip@turmel.org \
--cc=linux-raid@vger.kernel.org \
--cc=stone@heisl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).