From: Stone <stone@heisl.org>
To: Phil Turmel <philip@turmel.org>
Cc: linux-raid <linux-raid@vger.kernel.org>
Subject: Re: Brocken Raid & LUKS
Date: Thu, 21 Feb 2013 18:17:41 +0100 [thread overview]
Message-ID: <512656B5.4090505@heisl.org> (raw)
In-Reply-To: <51265132.7070706@turmel.org>
Am 21.02.2013 17:54, schrieb Phil Turmel:
> On 02/21/2013 11:51 AM, Stone wrote:
>
>> the dead-key was pressed
>> here the output:
>> root@bender:~# dd if=/dev/zero bs=1024 count=12 seek=1073006628
>> of=/dev/sdc1
>> 12+0 records in
>> 12+0 records out
>> 12288 bytes (12 kB) copied, 0,00019109 s, 64,3 MB/s
>> root@bender:~# dd if=/dev/zero bs=1024 count=12 seek=1073101016
>> of=/dev/sdc1
>> 12+0 records in
>> 12+0 records out
>> 12288 bytes (12 kB) copied, 0,00017799 s, 69,0 MB/s
>> root@bender:~# dd if=/dev/zero bs=1024 count=8 seek=1335739456 of=/dev/sdc1
>> 8+0 records in
>> 8+0 records out
>> 8192 bytes (8,2 kB) copied, 0,000159338 s, 51,4 MB/s
>> root@bender:~# dd if=/dev/zero bs=1024 count=8 seek=1346771164 of=/dev/sdc1
>> 8+0 records in
>> 8+0 records out
>> 8192 bytes (8,2 kB) copied, 0,000161977 s, 50,6 MB/s
>> root@bender:~# dd if=/dev/zero bs=1024 count=8 seek=1348581732 of=/dev/sdc1
>> 8+0 records in
>> 8+0 records out
>> 8192 bytes (8,2 kB) copied, 0,000157825 s, 51,9 MB/s
> Very good.
>
>> now i boot my server with a live cd and recreate my raid.
>> if this was successfully i open the LUKS and check it.
>> here my commands for this step:
>> mdadm --create /dev/md2 --assume-clean --verbose --level=5
>> --raid-devices=4 /dev/sdc1 /dev/sdd1 missing /dev/sdf1
>> cryptsetup luksOpen /dev/md2 md2_nas
>> fsck -n /dev/md2
> Looks good.
>
> Phil
i created the raid successfulle and the LUKS is open!
this is the output of my fsck
fsck -n /dev/mapper/md2_nas
fsck from util-linux 2.19.1
e2fsck 1.41.14 (22-Dec-2010)
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open
/dev/mapper/md2_nas
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
next prev parent reply other threads:[~2013-02-21 17:17 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-19 16:01 Brocken Raid & LUKS stone
2013-02-19 17:57 ` Phil Turmel
[not found] ` <5123E4E9.3020609@heisl.org>
2013-02-19 21:16 ` Phil Turmel
[not found] ` <5123EF45.6080405@heisl.org>
[not found] ` <5123F7C7.7000406@turmel.org>
[not found] ` <5123FB71.3060509@heisl.org>
2013-02-20 0:31 ` Phil Turmel
2013-02-20 18:32 ` Stone
2013-02-20 18:39 ` Phil Turmel
2013-02-21 7:04 ` Stone
2013-02-21 9:42 ` stone
2013-02-21 13:29 ` Phil Turmel
2013-02-21 14:19 ` stone
2013-02-21 15:04 ` Phil Turmel
2013-02-21 15:30 ` stone
2013-02-21 15:38 ` Phil Turmel
2013-02-21 15:49 ` Phil Turmel
2013-02-21 16:32 ` Stone
2013-02-21 16:41 ` Phil Turmel
2013-02-21 16:43 ` Stone
2013-02-21 16:46 ` Phil Turmel
2013-02-21 16:51 ` Stone
2013-02-21 16:54 ` Phil Turmel
2013-02-21 17:17 ` Stone [this message]
2013-02-21 17:23 ` Stone
2013-02-21 17:36 ` Phil Turmel
2013-02-21 17:47 ` Stone
2013-02-21 18:00 ` Phil Turmel
2013-02-21 18:08 ` Stone
2013-02-21 18:11 ` Phil Turmel
2013-02-21 18:29 ` Stone
2013-02-21 18:54 ` Phil Turmel
2013-02-21 19:12 ` Stone
2013-02-21 19:17 ` Stone
2013-02-21 19:24 ` Phil Turmel
2013-02-21 19:29 ` Stone
2013-02-21 19:45 ` Phil Turmel
2013-02-21 19:46 ` Stone
[not found] ` <51269DE0.5070905@heisl.org>
2013-02-22 10:31 ` stone
2013-02-22 13:53 ` Phil Turmel
2013-02-22 14:58 ` Stone
2013-02-22 15:37 ` Phil Turmel
2013-02-22 18:17 ` Stone
2013-02-22 18:23 ` Phil Turmel
2013-02-22 20:43 ` Stone
2013-02-22 22:35 ` Phil Turmel
2013-02-22 22:42 ` Stone
2013-02-23 2:22 ` Phil Turmel
2013-02-23 3:11 ` Stone
2013-02-23 4:36 ` Phil Turmel
2013-02-23 10:19 ` Stone
2013-02-23 16:10 ` Phil Turmel
2013-02-23 22:26 ` Stone
2013-02-23 23:49 ` Phil Turmel
2013-02-24 0:13 ` Stone
2013-02-24 4:04 ` Phil Turmel
2013-02-24 7:10 ` Stone
2013-02-24 14:15 ` Phil Turmel
2013-02-24 18:22 ` Stone
2013-02-24 18:33 ` Phil Turmel
2013-02-24 19:23 ` Stone
2013-02-24 19:51 ` Phil Turmel
2013-02-24 20:15 ` Stone
2013-02-24 20:25 ` Phil Turmel
2013-02-24 20:38 ` Stone
2013-02-24 20:44 ` Phil Turmel
2013-02-24 20:47 ` Stone
2013-02-25 9:06 ` stone
2013-02-25 18:31 ` Stone
2013-02-25 20:11 ` Stone
2013-02-26 0:19 ` Phil Turmel
2013-02-27 7:26 ` Stone
2013-02-27 19:04 ` Stone
2013-02-27 19:33 ` Hans-Peter Jansen
2013-02-27 19:51 ` Stone
2013-03-02 17:13 ` Phil Turmel
[not found] ` <5127B0AB.5040108@heisl.org>
2013-02-22 18:30 ` Phil Turmel
2013-02-21 22:29 ` Chris Murphy
2013-02-21 22:34 ` Phil Turmel
2013-02-21 22:20 ` Chris Murphy
2013-02-21 22:26 ` Phil Turmel
2013-02-21 13:15 ` Phil Turmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=512656B5.4090505@heisl.org \
--to=stone@heisl.org \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).