From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stone Subject: Re: Brocken Raid & LUKS Date: Thu, 21 Feb 2013 19:29:33 +0100 Message-ID: <5126678D.9030101@heisl.org> References: <5123A1CC.2000003@heisl.org> <5123BD1F.4060200@turmel.org> <5123E4E9.3020609@heisl.org> <5123EB92.5090505@turmel.org> <5123EF45.6080405@heisl.org> <5123F7C7.7000406@turmel.org> <5123FB71.3060509@heisl.org> <5124196F.6090000@turmel.org> <512516C2.3010105@heisl.org> <5125184A.6040707@turmel.org> <5125C6E9.4050802@heisl.org> <5125EBFD.3050802@heisl.org> <51262137.3040609@turmel.org> <51262CE0.3000809@heisl.org> <51263785.2010001@turmel.org> <51263D9D.1080002@heisl.org> <51263F7E.7040207@turmel.org> <5126421E.3040702@turmel.org> <51264C18.8000201@heisl.org> <51264E26.9050100@turmel.org> <51264EBF.9090000@heisl.org> <51264F7F.3020508@turmel.org> <512650A1.7070103@heisl.org> <51265132.7070706@turmel.org> <512656B5.4090505@heisl.org> <51265824.4030407@heisl.org> <51265B0B.9020108@turm el.org> <51265DA7.2030209@heisl.org> <512660B9.8090609@turmel.org> <5126629A.1090002@heisl.org> <51266360.9030402@turmel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <51266360.9030402@turmel.org> Sender: linux-raid-owner@vger.kernel.org To: Phil Turmel Cc: linux-raid List-Id: linux-raid.ids Am 21.02.2013 19:11, schrieb Phil Turmel: > On 02/21/2013 01:08 PM, Stone wrote: > >> ok i have checked all superblocks but i get always the same message. >> here one sample: >> fsck.ext4 -n -b 644972544 /dev/mapper/md2_nas >> e2fsck 1.41.14 (22-Dec-2010) >> fsck.ext4: Invalid argument while trying to open /dev/mapper/md2_nas >> >> The superblock could not be read or does not describe a correct ext2 >> filesystem. If the device is valid and it really contains an ext2 >> filesystem (and not swap or ufs or something else), then the superblock >> is corrupt, and you might try running e2fsck with an alternate superblock: >> e2fsck -b 8193 > You very likely have the wrong chunk size. > > Close luks, stop md2, and re-create with --chunk=64 > > And then try to fsck again. (Without -b at first.) > > Phil ok. with --chunk=64 i cannot open the luks. in witch steps (chunk) should i continue?