From: Stone <stone@heisl.org>
To: Phil Turmel <philip@turmel.org>
Cc: linux-raid <linux-raid@vger.kernel.org>
Subject: Re: Brocken Raid & LUKS
Date: Sun, 24 Feb 2013 21:38:05 +0100 [thread overview]
Message-ID: <512A7A2D.3040109@heisl.org> (raw)
In-Reply-To: <512A7730.7010600@turmel.org>
Am 24.02.2013 21:25, schrieb Phil Turmel:
> On 02/24/2013 03:15 PM, Stone wrote:
>> Am 24.02.2013 20:51, schrieb Phil Turmel:
>>> On 02/24/2013 02:23 PM, Stone wrote:
>>>
>>>> hm ok.
>>>> what copy method recommend you?
>>>> dd? (the duration is very long)
>>> I normally use dc3dd. For troublesome disks, gnu ddrescue is the better
>>> choice.
>> ok. this tool i do not know but i think this is the right way:
>> ddrescue /dev/sdx /path/to/my/new/drive
> If you have spares of the same size, simply duplicate to the spare:
>
> ddrescue -b 4096 /dev/sdx /dev/sdy
>
ok. i copy the disks to my nas and than i will have a look how many data
i can recover. if i can many data recover than i buy spare disk. if i
dont can recover my data than i can copy back from the nas to the disks
and try my luck with the secound case partiontable
i started the copy to my nas with this command:
with simple: ddrescue /dev/sdb /mnt/nas/TEMP/sdb.dd
the rate over the network is good with 112mb/s
i think i will finish the copy tomorrow.
if i can copy data. is there a way to check the files of consistency?
thx
next prev parent reply other threads:[~2013-02-24 20:38 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-19 16:01 Brocken Raid & LUKS stone
2013-02-19 17:57 ` Phil Turmel
[not found] ` <5123E4E9.3020609@heisl.org>
2013-02-19 21:16 ` Phil Turmel
[not found] ` <5123EF45.6080405@heisl.org>
[not found] ` <5123F7C7.7000406@turmel.org>
[not found] ` <5123FB71.3060509@heisl.org>
2013-02-20 0:31 ` Phil Turmel
2013-02-20 18:32 ` Stone
2013-02-20 18:39 ` Phil Turmel
2013-02-21 7:04 ` Stone
2013-02-21 9:42 ` stone
2013-02-21 13:29 ` Phil Turmel
2013-02-21 14:19 ` stone
2013-02-21 15:04 ` Phil Turmel
2013-02-21 15:30 ` stone
2013-02-21 15:38 ` Phil Turmel
2013-02-21 15:49 ` Phil Turmel
2013-02-21 16:32 ` Stone
2013-02-21 16:41 ` Phil Turmel
2013-02-21 16:43 ` Stone
2013-02-21 16:46 ` Phil Turmel
2013-02-21 16:51 ` Stone
2013-02-21 16:54 ` Phil Turmel
2013-02-21 17:17 ` Stone
2013-02-21 17:23 ` Stone
2013-02-21 17:36 ` Phil Turmel
2013-02-21 17:47 ` Stone
2013-02-21 18:00 ` Phil Turmel
2013-02-21 18:08 ` Stone
2013-02-21 18:11 ` Phil Turmel
2013-02-21 18:29 ` Stone
2013-02-21 18:54 ` Phil Turmel
2013-02-21 19:12 ` Stone
2013-02-21 19:17 ` Stone
2013-02-21 19:24 ` Phil Turmel
2013-02-21 19:29 ` Stone
2013-02-21 19:45 ` Phil Turmel
2013-02-21 19:46 ` Stone
[not found] ` <51269DE0.5070905@heisl.org>
2013-02-22 10:31 ` stone
2013-02-22 13:53 ` Phil Turmel
2013-02-22 14:58 ` Stone
2013-02-22 15:37 ` Phil Turmel
2013-02-22 18:17 ` Stone
2013-02-22 18:23 ` Phil Turmel
2013-02-22 20:43 ` Stone
2013-02-22 22:35 ` Phil Turmel
2013-02-22 22:42 ` Stone
2013-02-23 2:22 ` Phil Turmel
2013-02-23 3:11 ` Stone
2013-02-23 4:36 ` Phil Turmel
2013-02-23 10:19 ` Stone
2013-02-23 16:10 ` Phil Turmel
2013-02-23 22:26 ` Stone
2013-02-23 23:49 ` Phil Turmel
2013-02-24 0:13 ` Stone
2013-02-24 4:04 ` Phil Turmel
2013-02-24 7:10 ` Stone
2013-02-24 14:15 ` Phil Turmel
2013-02-24 18:22 ` Stone
2013-02-24 18:33 ` Phil Turmel
2013-02-24 19:23 ` Stone
2013-02-24 19:51 ` Phil Turmel
2013-02-24 20:15 ` Stone
2013-02-24 20:25 ` Phil Turmel
2013-02-24 20:38 ` Stone [this message]
2013-02-24 20:44 ` Phil Turmel
2013-02-24 20:47 ` Stone
2013-02-25 9:06 ` stone
2013-02-25 18:31 ` Stone
2013-02-25 20:11 ` Stone
2013-02-26 0:19 ` Phil Turmel
2013-02-27 7:26 ` Stone
2013-02-27 19:04 ` Stone
2013-02-27 19:33 ` Hans-Peter Jansen
2013-02-27 19:51 ` Stone
2013-03-02 17:13 ` Phil Turmel
[not found] ` <5127B0AB.5040108@heisl.org>
2013-02-22 18:30 ` Phil Turmel
2013-02-21 22:29 ` Chris Murphy
2013-02-21 22:34 ` Phil Turmel
2013-02-21 22:20 ` Chris Murphy
2013-02-21 22:26 ` Phil Turmel
2013-02-21 13:15 ` Phil Turmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=512A7A2D.3040109@heisl.org \
--to=stone@heisl.org \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).