From: Frederick Gnodtke <FGnodtke@cronosx.de>
To: linux-raid@vger.kernel.org
Subject: Help with failed raid 5
Date: Sat, 04 May 2013 18:51:33 +0200 [thread overview]
Message-ID: <51853C95.5030008@cronosx.de> (raw)
Hi,
I hope someone can help me with this as I am struggling with it since
this morning.
The following scenario: I have a softwareraid 5 created using mdadm.
It consisted out of 5 Disks, each of them 2000GB with one as spare-drive.
The original mdadm.conf looked like this:
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
DEVICE partitions
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0666 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR root
# definitions of existing MD arrays
# This file was auto-generated on Mon, 19 Nov 2012 09:30:14 -0800
# by mkconf 3.1.4-1+8efb9d1+squeeze1
ARRAY /dev/md/0 metadata=1.2 spares=1 name=CronosR:0
UUID=c008e97a:aacc7745:c8c49a31:08312d4e
Everything was fine until this morning I tried to open a file and got an
I/O-Error. I rebooted the computer, stopped the raid, did an smartctl -t
long on all drives belonging to the raid, but they all seem to run quiet
well.
Reassembling it using mdadm --assemble --scan --force did not lead to
anything so I tried to recreate it using "mdadm --create /dev/md0
--assume-clean --raid-devices=5 --level=5 /dev/sd[abdef]
It created an array but there was no filesystem to mount.
fsck could not detect an filesystem and I didn't relocate any "bad
blocks" as I was afraid this might reduce my chance to repair the raid
to zero.
The original Superblocks of all disks befor recreating the array looked
like this (The raid already failed when I captured this):
/dev/sdb:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : c008e97a:aacc7745:c8c49a31:08312d4e
Name : CronosR:0 (local to host CronosR)
Creation Time : Mon Nov 12 10:27:52 2012
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB)
Array Size : 15628103680 (7452.06 GiB 8001.59 GB)
Used Dev Size : 3907025920 (1863.02 GiB 2000.40 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
State : clean
Device UUID : eec2e852:30e9cbcf:d90a5e2c:e176ee4b
Update Time : Sat May 4 02:48:00 2013
Checksum : 4479154a - correct
Events : 0
Layout : left-symmetric
Chunk Size : 512K
Device Role : spare
Array State : .AA.A ('A' == active, '.' == missing)
/dev/sdc:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : c008e97a:aacc7745:c8c49a31:08312d4e
Name : CronosR:0 (local to host CronosR)
Creation Time : Mon Nov 12 10:27:52 2012
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB)
Array Size : 15628103680 (7452.06 GiB 8001.59 GB)
Used Dev Size : 3907025920 (1863.02 GiB 2000.40 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 703f0adc:b164366b:50653ead:7072d192
Update Time : Sat May 4 02:48:00 2013
Checksum : 30c86354 - correct
Events : 0
Layout : left-symmetric
Chunk Size : 512K
Device Role : spare
Array State : .AA.A ('A' == active, '.' == missing)
/dev/sdd:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : c008e97a:aacc7745:c8c49a31:08312d4e
Name : CronosR:0 (local to host CronosR)
Creation Time : Mon Nov 12 10:27:52 2012
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB)
Array Size : 15628103680 (7452.06 GiB 8001.59 GB)
Used Dev Size : 3907025920 (1863.02 GiB 2000.40 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 3995e1e8:3188f2a6:f2afb876:9e024359
Update Time : Sat May 4 02:48:00 2013
Checksum : 9537952 - correct
Events : 836068
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 4
Array State : .AA.A ('A' == active, '.' == missing)
/dev/sde:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : c008e97a:aacc7745:c8c49a31:08312d4e
Name : CronosR:0 (local to host CronosR)
Creation Time : Mon Nov 12 10:27:52 2012
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB)
Array Size : 15628103680 (7452.06 GiB 8001.59 GB)
Used Dev Size : 3907025920 (1863.02 GiB 2000.40 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 27b14550:17bf2abe:14352207:93c20bd3
Update Time : Sat May 4 02:48:00 2013
Checksum : 9222113a - correct
Events : 836068
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : .AA.A ('A' == active, '.' == missing)
/dev/sdf:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x0
Array UUID : c008e97a:aacc7745:c8c49a31:08312d4e
Name : CronosR:0 (local to host CronosR)
Creation Time : Mon Nov 12 10:27:52 2012
Raid Level : raid5
Raid Devices : 5
Avail Dev Size : 3907027120 (1863.02 GiB 2000.40 GB)
Array Size : 15628103680 (7452.06 GiB 8001.59 GB)
Used Dev Size : 3907025920 (1863.02 GiB 2000.40 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
State : clean
Device UUID : 4bc817b1:8ac80143:798031df:caba2a52
Update Time : Sat May 4 02:48:00 2013
Checksum : cef9756a - correct
Events : 836068
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : .AA.A ('A' == active, '.' == missing)
Is there any chance to recover the raid?
Has anybody any idea?
As I am just a poor student I didn't quiet have the money to do backups
so my private data would be lost if the raid failed.
I would really appreciate your help!
Thank you all in advance,
Frederick Gnodtke
next reply other threads:[~2013-05-04 16:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-04 16:51 Frederick Gnodtke [this message]
2013-05-04 21:59 ` Help with failed raid 5 Drew
2013-05-05 21:52 ` Phil Turmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51853C95.5030008@cronosx.de \
--to=fgnodtke@cronosx.de \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).