linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Brad Campbell <brad@fnarfbargle.com>
To: Wols Lists <antlists@youngman.org.uk>,
	Mikael Abrahamsson <swmike@swm.pp.se>,
	Another Sillyname <anothersname@googlemail.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: Fwd: Installing Linux directly onto RAID6 Array...........
Date: Sun, 24 May 2015 21:48:09 +0800	[thread overview]
Message-ID: <5561D699.80403@fnarfbargle.com> (raw)
In-Reply-To: <5561C6E9.3060706@youngman.org.uk>

On 24/05/15 20:41, Wols Lists wrote:

> aiui raid won't help you at all here, will it?

Of course it will.

> Firstly, if you get write failures, the hard drive should swap the
> block, or the write layer should swap it. Nothing to do with raid
> whatsoever.

Yep..

> And if you get read errors, well, aiui, raid won't help here either -
> especially with mirrored raid, you just get a read failure. Raid does
> NOT give you error recovery unless the drive physically fails, and if
> it's a bad block it gets fixed at the disk or disk driver level - well
> below the raid driver.

Nope. If you get a read failure it will try and pull from another 
mirror, and *that* will succeed. Drives don't return dud* data. They 
either succeed or fail.

* Of course I've heard anecdotes from people about that happening, but 
it's not supposed to happen under *any* circumstances.

-- 
Dolphins are so intelligent that within a few weeks they can
train Americans to stand at the edge of the pool and throw them
fish.

  reply	other threads:[~2015-05-24 13:48 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-12 10:08 Installing Linux directly onto RAID6 Array Another Sillyname
2015-05-12 10:20 ` Rudy Zijlstra
2015-05-12 12:20   ` Phil Turmel
2015-05-12 12:31     ` Roman Mamedov
     [not found]       ` <CAOS+5GHhUoYxTTYOWU7cdN6GSdffSMGrhWHU5ZtWEjc4jEm3eg@mail.gmail.com>
2015-05-12 13:12         ` Fwd: " Another Sillyname
2015-05-12 13:42           ` Roman Mamedov
2015-05-12 13:27 ` Wilson, Jonathan
2015-05-12 14:05   ` Another Sillyname
2015-05-13  0:02 ` Adam Goryachev
     [not found]   ` <CAOS+5GEP6+7OAHkqQjeyGHAB5u-_-Vq2JWGpcOemYHdCjmR5Lg@mail.gmail.com>
2015-05-24  1:18     ` Fwd: " Another Sillyname
2015-05-24  8:36       ` Mikael Abrahamsson
2015-05-24  9:08         ` Another Sillyname
2015-05-24  9:46           ` Mikael Abrahamsson
2015-05-24 10:07             ` Another Sillyname
2015-05-24 10:35               ` Mikael Abrahamsson
2015-05-24 10:42                 ` Another Sillyname
2015-05-26  8:29           ` NeilBrown
2015-05-26 13:18             ` Another Sillyname
2015-05-24 11:12         ` Fwd: " Wols Lists
2015-05-24 11:57           ` Brad Campbell
2015-05-24 12:41             ` Wols Lists
2015-05-24 13:48               ` Brad Campbell [this message]
2015-05-24 14:06               ` Mikael Abrahamsson
2015-05-24 14:53                 ` Wols Lists
2015-05-24 14:57                   ` Mikael Abrahamsson
2015-05-25 21:03                     ` Another Sillyname
2015-05-25 23:20                       ` Wols Lists
2015-05-26  7:08                         ` Another Sillyname
2015-05-26  8:06                           ` Mikael Abrahamsson
2015-05-26 11:18                             ` Another Sillyname
2015-05-26 14:08                               ` Mikael Abrahamsson
2015-05-26 20:11                                 ` Wols Lists
2015-05-26 21:02                                   ` Another Sillyname
2015-05-27  4:59                                   ` Mikael Abrahamsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5561D699.80403@fnarfbargle.com \
    --to=brad@fnarfbargle.com \
    --cc=anothersname@googlemail.com \
    --cc=antlists@youngman.org.uk \
    --cc=linux-raid@vger.kernel.org \
    --cc=swmike@swm.pp.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).