From: Benjammin2068 <benjammin2068@gmail.com>
To: linux-raid@vger.kernel.org
Subject: Re: Need Help with crashed RAID5 (that was rebuilding and then had SATA error on another drive)
Date: Thu, 25 Aug 2016 21:54:45 -0500 [thread overview]
Message-ID: <57BFAF75.1080807@gmail.com> (raw)
In-Reply-To: <f3d5add5-cfad-e33f-2f75-934189fa501d@turmel.org>
On 08/25/2016 09:22 PM, Phil Turmel wrote:
> On 08/25/2016 09:20 PM, Ben wrote:
>
>> I read a lot of conflicting info on SCT/ERC online (well, TLER anyway)
>> -- Adam likes it enabled. What say the rest of you?
> Adam is correct, and it's not a matter of "like".
"like" was just an expression.
>
>
> You either must have
> it enabled, or you *must* apply the kernel driver timeout work-around
> (180 seconds) for that drive. Failure to do so results in crashed arrays.
For the ST1000DM003, its SMART capabilities states "SCT Status Supported" -- What does that mean in comparison with the other HD103SJ drives?
It does SCT but doesn't let the user control it or it doesn't do it at all?
(smartctl -l scterc /dev/sde yields a message that implies control is not supported)
>
> Enterprise and NAS drives work out of the box. Desktop/green drives do not.
Yea - I didn't buy any green drives (purposefully anyway) for this system.
>
> Some reading assignments from old discussions (read whole threads if you
> have time):
>
> http://marc.info/?l=linux-raid&m=139050322510249&w=2
> http://marc.info/?l=linux-raid&m=135863964624202&w=2
> http://marc.info/?l=linux-raid&m=135811522817345&w=1
> http://marc.info/?l=linux-raid&m=133761065622164&w=2
> http://marc.info/?l=linux-raid&m=132477199207506
> http://marc.info/?l=linux-raid&m=133665797115876&w=2
> http://marc.info/?l=linux-raid&m=142487508806844&w=3
> http://marc.info/?l=linux-raid&m=144535576302583&w=2
>
Thanks, will go read.
-Ben
next prev parent reply other threads:[~2016-08-26 2:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 21:51 Need Help with crashed RAID5 (that was rebuilding and then had SATA error on another drive) Ben Kamen
2016-08-22 23:06 ` Adam Goryachev
2016-08-23 11:36 ` Wols Lists
2016-08-23 15:44 ` Ben
[not found] ` <CADDTLRBf9NPO6OuF4a3b+xffZgeZRqHRG+pJdPmbc9-Jat0HVQ@mail.gmail.com>
[not found] ` <d6d3fe0d-3f9f-985f-9bfb-051428cf221b@websitemanagers.com.au>
[not found] ` <57BBDA5B.3020706@gmail.com>
[not found] ` <57BBDC15.5030301@gmail.com>
[not found] ` <b8c6a380-7e6a-fda9-5834-b85271b26892@websitemanagers.com.au>
[not found] ` <57BC61F7.8070102@gmail.com>
[not found] ` <aca4e83f-9a3f-c200-7c16-3b5d9df52c1e@websitemanagers.com.au>
[not found] ` <57BE450B.4030700@gmail.com>
[not found] ` <56e86db5-456d-e9c1-339d-ba8903fe5dde@websitemanagers.com.au>
[not found] ` <57BE52BC.6040908@gmail.com>
[not found] ` <933228e0-bce4-ffad-f48d-034bf89bc07f@websitemanagers.com.au>
2016-08-26 1:20 ` Ben
2016-08-26 2:22 ` Phil Turmel
2016-08-26 2:54 ` Benjammin2068 [this message]
2016-08-26 12:38 ` Phil Turmel
2016-08-26 18:07 ` Wols Lists
2016-08-28 18:29 ` Benjammin2068
2016-08-28 19:20 ` Anthony Youngman
2016-08-29 1:23 ` Benjammin2068
2016-08-28 23:54 ` Adam Goryachev
2016-08-29 1:25 ` Benjammin2068
2016-08-29 11:19 ` Wols Lists
2016-09-18 17:13 ` Best tool to partition Drives with new sector geometry - (WAS: Need Help with crashed RAID5 (that was rebuilding and then had SATA error on another drive)) Benjammin2068
2016-09-18 17:50 ` Chris Murphy
2016-09-18 18:41 ` Benjammin2068
2016-09-18 19:17 ` Wols Lists
2016-09-18 19:58 ` Benjammin2068
2016-09-18 21:21 ` Wols Lists
2016-09-18 21:29 ` Benjammin2068
2016-09-19 6:25 ` Wols Lists
2016-09-19 16:17 ` Benjammin2068
2016-09-18 18:08 ` Benjammin2068
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57BFAF75.1080807@gmail.com \
--to=benjammin2068@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).