From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lapohos Tibor Subject: (unknown) Date: Wed, 6 Jan 2010 06:19:38 -0800 (PST) Message-ID: <600349.38000.qm@web88207.mail.re2.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org List-Id: linux-raid.ids Hello, I successfully set up an Intel Matrix Raid device with a RAID1 and a RAID0 volume, each having a couple of partitions, but then I could not install GRUB2 on the RAID1 volume, which I wanted to use to boot from and mount as root. It turned out that the "IMSM" metadata is not supported in GRUB2 (v1.97.1) just yet, so I had to turn away from my original plan. To "imitate" the setup I originally wanded, I turned both of my drives into AHCI controlled devices in the BIOS (instead of RAID), and I partitioned them to obtain /dev/sda[12] and /dev/sdb[12]. Then I used /dev/sd[ab]1 to build a RAID1 set, and /dev/sd[ab]2 to create a RAID0 set using mdadm v 3.0.3: > mdadm -C /dev/md0 -v -e 0 -l 1 -n 2 /dev/sda1 /dev/sdb1 > mdadm -C /dev/md1 -v -e 0 -l 0 -n 2 /dev/sda2 /dev/sdb2 I set the metadata type to 0.90 because I would like to boot from it and allow the kernel to auto-detect the RAID devices while it's booting, in order to can get away from using an intitrd (I am building my own distribution based on CLFS x86_64 multilib). I used cfdisk to partition both of the /dev/md[01] devices, and I obtained /dev/md0p[123] and /dev/md1p[12]. The plan is to use /dev/md0p1 as a RAID1 root partition, and have the system boot from /dev/md0. I formatted /dev/md0p1 as > mk2efs -t ext4 -L OS /dev/md0p1 To this point, things went smoothly. mdadm -D... and mdadm -E... did report back working devices as intended. Then mounted /dev/md0p1 on a directory called /root/os, and I did > grub-install --root-directory=/root/os /dev/md0 or > grub-install --root-directory=/root/os "md0" and I got a warning and an error message: "Your embedding area is unusually small. core.img won't fit in it." and "Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume." What did I do wrong, and how do I fix it? Thanks ahead, Tibor