From: "Rene Scherer" <rene@scherer-online.com>
To: linux-raid@vger.kernel.org
Subject: /proc/mdstat output
Date: Thu, 23 May 2002 11:54:01 +0100 (BST) [thread overview]
Message-ID: <64718.139.149.1.195.1022151241.squirrel@www.scherer-online.com> (raw)
Hi all
I've got a small question about the output of "cat /proc/mdstat"
I've got 3 RAIDs configured (RAID-1 mirror), md0, md1 and md2
When I run "cat /proc/mdstat", I get the following output:
Personalities : [raid1]
read_ahead 1024 sectors
md1 : active raid1 sdb2[1] [dev 08:02][0]
10241344 blocks [2/2] [UU]
md2 : active raid1 sdb3[1] [dev 08:03][0]
38130176 blocks [2/2] [UU]
md0 : active raid1 sdb1[1] [dev 08:01][0]
10241280 blocks [2/2] [UU]
unused devices: <none>
It looks like all 3 arrays are working fine (e.g. [UU]), but only 1
partition is listed (e.g. sdb1[1]). Why is it's mirror sda1 not listed?
Because of this webmin thinks all the sda disk are down. :-(
Any ideas?
Thanks,
Rene
---------------------------------------------------------------------------
Rene Scherer, 12 Bushwood Drive, London SE1 5RE, United Kingdom
Tel: +44 (20) 7232 1867, Fax: +44 (20) 7232 1867
Email: rene@scherer-online.com, Web: http://www.scherer-online.com
next reply other threads:[~2002-05-23 10:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-23 10:54 Rene Scherer [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-05-23 12:06 /proc/mdstat output Potthoff, Kay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=64718.139.149.1.195.1022151241.squirrel@www.scherer-online.com \
--to=rene@scherer-online.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).