linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Janos Haar" <janos.haar@netcenter.hu>
To: Mikael Abrahamsson <swmike@swm.pp.se>
Cc: linux-raid@vger.kernel.org
Subject: Re: Suggestion needed for fixing RAID6
Date: Thu, 22 Apr 2010 18:25:06 +0200	[thread overview]
Message-ID: <652301cae238$5faf2440$0400a8c0@dcccs> (raw)
In-Reply-To: alpine.DEB.1.10.1004221713420.6768@uplift.swm.pp.se


----- Original Message ----- 
From: "Mikael Abrahamsson" <swmike@swm.pp.se>
To: "Janos Haar" <janos.haar@netcenter.hu>
Cc: <linux-raid@vger.kernel.org>
Sent: Thursday, April 22, 2010 5:18 PM
Subject: Re: Suggestion needed for fixing RAID6


> On Thu, 22 Apr 2010, Janos Haar wrote:
>
>> I am just tested one of the badblock-hdds, and the bad blocks comes 
>> periodicaly, like a little and short scratch, and the drive can't correct 
>> these by write.
>
> Oh, if you get write errors on the drive then you're in bigger trouble.

I am planning to replace all the defective drives, but first i need to 
rebuild the missing part.
I don't care about wich is the problem, the first drive have 123 unredable 
sectors, and i have tried to rewrite one but not works.
This will goes to RMA, but first i need to solve the problem.

>
>> Maybe this is why the kernel kicsk it out...
>
> Yes, a write error to the drive is a kick:able offence. What does smartctl 
> say about the drives?

The smart healt is good. (not wondering...)
But the drive have some offline unc sectors and some pendings.

>
>> But anyway, the problem is still here, i want to rebuild the missing disk 
>> (prior to replace the badblocked drives one by one), but the kernel kicks 
>> out more 2 drive during the rebuild.
>
> I don't have a good idea that assures your data, unfortunately. One way 
> would be to dd the defective drives to working ones, but that will most 
> likely cause you to have data loss on the defective sectors (since md has 
> no idea that these sectors should be re-created from parity).

Exactly.
This is why i ask here. :-)
Because i don't want to make some KB errors on the array wich have all the 
needed information.

Any good idea?

Thanks a lot,
Janos

>
> -- 
> Mikael Abrahamsson    email: swmike@swm.pp.se
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html 


  reply	other threads:[~2010-04-22 16:25 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-04-22 10:09 Suggestion needed for fixing RAID6 Janos Haar
2010-04-22 15:00 ` Mikael Abrahamsson
2010-04-22 15:12   ` Janos Haar
2010-04-22 15:18     ` Mikael Abrahamsson
2010-04-22 16:25       ` Janos Haar [this message]
2010-04-22 16:32       ` Peter Rabbitson
     [not found] ` <4BD0AF2D.90207@stud.tu-ilmenau.de>
2010-04-22 20:48   ` Janos Haar
2010-04-23  6:51 ` Luca Berra
2010-04-23  8:47   ` Janos Haar
2010-04-23 12:34     ` MRK
2010-04-24 19:36       ` Janos Haar
2010-04-24 22:47         ` MRK
2010-04-25 10:00           ` Janos Haar
2010-04-26 10:24             ` MRK
2010-04-26 12:52               ` Janos Haar
2010-04-26 16:53                 ` MRK
2010-04-26 22:39                   ` Janos Haar
2010-04-26 23:06                     ` Michael Evans
     [not found]                       ` <7cfd01cae598$419e8d20$0400a8c0@dcccs>
2010-04-27  0:04                         ` Michael Evans
2010-04-27 15:50                   ` Janos Haar
2010-04-27 23:02                     ` MRK
2010-04-28  1:37                       ` Neil Brown
2010-04-28  2:02                         ` Mikael Abrahamsson
2010-04-28  2:12                           ` Neil Brown
2010-04-28  2:30                             ` Mikael Abrahamsson
2010-05-03  2:29                               ` Neil Brown
2010-04-28 12:57                         ` MRK
2010-04-28 13:32                           ` Janos Haar
2010-04-28 14:19                             ` MRK
2010-04-28 14:51                               ` Janos Haar
2010-04-29  7:55                               ` Janos Haar
2010-04-29 15:22                                 ` MRK
2010-04-29 21:07                                   ` Janos Haar
2010-04-29 23:00                                     ` MRK
2010-04-30  6:17                                       ` Janos Haar
2010-04-30 23:54                                         ` MRK
     [not found]                                         ` <4BDB6DB6.5020306@sh iftmail.org>
2010-05-01  9:37                                           ` Janos Haar
2010-05-01 17:17                                             ` MRK
2010-05-01 21:44                                               ` Janos Haar
2010-05-02 23:05                                                 ` MRK
2010-05-03  2:17                                                 ` Neil Brown
2010-05-03 10:04                                                   ` MRK
2010-05-03 10:21                                                     ` MRK
2010-05-03 21:04                                                       ` Neil Brown
2010-05-03 21:02                                                     ` Neil Brown
     [not found]                                                   ` <4BDE9FB6.80309@shiftmai! l.org>
2010-05-03 10:20                                                     ` Janos Haar
2010-05-05 15:24                                                     ` Suggestion needed for fixing RAID6 [SOLVED] Janos Haar
2010-05-05 19:27                                                       ` MRK

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='652301cae238$5faf2440$0400a8c0@dcccs' \
    --to=janos.haar@netcenter.hu \
    --cc=linux-raid@vger.kernel.org \
    --cc=swmike@swm.pp.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).