From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Majed B." Subject: Re: md data-check causes soft lockup Date: Tue, 22 Sep 2009 18:13:31 +0300 Message-ID: <70ed7c3e0909220813t44d97414xdd4ee050f2e1c75e@mail.gmail.com> References: <4AB7C11E.60801@howardsilvan.com> <70ed7c3e0909211154y3e4abcadyf76822e60127dfad@mail.gmail.com> <4AB8E2A6.2020800@howardsilvan.com> <70ed7c3e0909220748y2e151ebv7f232cf2b7c79617@mail.gmail.com> <4AB8E661.8080706@howardsilvan.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <4AB8E661.8080706@howardsilvan.com> Sender: linux-raid-owner@vger.kernel.org To: Lee Howard Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids Have you tried attaching the checking process to a specific CPU/Core? It's called Affinity. Also, did you try to reduce the numbers in: /proc/sys/dev/raid/speed_li= mit_min Keep it as low as possible, and md should drop to that number (I think it's in kB) when the system is being utilized, then go back to /proc/sys/dev/raid/speed_limit_max when it's idle. On Tue, Sep 22, 2009 at 5:59 PM, Lee Howard w= rote: > Majed B. wrote: >> >> I must have missed that part. It may not work for your case, but wor= th >> trying. >> >> Perhaps Neil Brown, or someone involved could shed some light on thi= s. >> >> If I remember correctly, those soft lockups were harmless anyway. >> > > Not harmless for production use. =C2=A0Yes, data is not harmed, and y= es, the > problem state does recover when the data-check finishes, but during t= he > data-check the system is virtually unresponsive and all other use of = the > system is stalled. > > Thanks, > > Lee. > >> On Tue, Sep 22, 2009 at 5:43 PM, Lee Howard >> wrote: >> >>> >>> Thanks Majed, >>> >>> I've looked at the patch and it modifies md/raid5.c. =C2=A0However,= I'm using >>> RAID1. =C2=A0Am I ignorant for doubting that the patch to raid5.c h= as any >>> affect >>> on RAID1? >>> >>> Thanks, >>> >>> Lee. >>> >>> >>> Majed B. wrote: >>> >>>> >>>> Hello, >>>> >>>> Check out the thread with the subject: BUG: soft lockup in >>>> [md4_raid5:21137] >>>> >>>> I think the guys have already fixed this in 2.6.32. The patch is >>>> mentioned in one of the replies, if you wish to try it. >>>> >>>> On Mon, Sep 21, 2009 at 9:08 PM, Lee Howard >>>> wrote: >>>> >>>> >>>>> >>>>> Linux software RAID maintainers and developers, >>>>> >>>>> Two months ago I wrote to the Linux kernel mailing list regarding= a >>>>> condition expressed as "BUG: soft lockup - CPU#3 stuck for 61s!".= =C2=A0I >>>>> initially battled this recurring problem in both Fedora 10 and Fe= dora >>>>> 11. >>>>> =C2=A0Rafael J. Wysocki suggested that I update the kernel (to 2.= 6.31-rc4 or >>>>> later) and see if the problem resurfaced. =C2=A0I then used kerne= l >>>>> 2.6.31-0.94.rc4.fc12.x86_64 and found that the problem still cont= inued, >>>>> but >>>>> noticeably only when the md data-check process was run. >>>>> >>>>> You can read the last post to the LKML thread (with links to the = entire >>>>> thread) here: >>>>> >>>>> http://lkml.org/lkml/2009/8/6/387 >>>>> >>>>> The md data-check is being run in Fedora 11 by >>>>> /etc/cron.weekly/raid-check >>>>> which is a little shell script that looks like this: >>>>> >>>>> ------------------------------------------------------ >>>>> #!/bin/bash >>>>> >>>>> for dev in `grep "^md.*: active" /proc/mdstat | cut -f 1 -d ' '`;= do >>>>> =C2=A0 =C2=A0 [ -f /sys/block/$dev/md/sync_action ] && \ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 echo "check" > /sys/blo= ck/$dev/md/sync_action >>>>> done >>>>> ------------------------------------------------------ >>>>> >>>>> I have disabled this weekly data-check, and since doing so have n= ot >>>>> encountered any soft lockup (or any other problem, for that matte= r). >>>>> >>>>> For reference, you can see in this thread here that I am not the = only >>>>> one >>>>> to >>>>> have this problem: >>>>> >>>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/212684 >>>>> >>>>> It may important to note that I am running a 4-disk RAID1 array o= n >>>>> 500GB >>>>> Western-Digial SATA drives. =C2=A0I've attached the output of 'ls= pci -vv' as >>>>> "lspci.out". =C2=A0I've attached the output of 'hdparm -I /dev/sd= a' as >>>>> "hdparm.out". =C2=A0/dev/sda, /dev/sdb, /dev/sdc, and /dev/sdd ar= e all >>>>> identical >>>>> drive types. =C2=A0I've attached the output of 'for i in 0 1 2; d= o mdadm >>>>> --detail >>>>> /dev/md$i; done' as "mdadm.out". >>>>> >>>>> Please let me know if this is a configuration problem, a kernel b= ug, or >>>>> something else. =C2=A0Please let me know how to fix this problem = so that I >>>>> can >>>>> safely re-enable md data-check. >>>>> >>>>> Thanks, >>>>> >>>>> Lee. >>>>> >>>>> 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (r= ev a2) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR+ FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] HyperTransport: Slave or P= rimary Interface >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Command: BaseUnit= ID=3D0 UnitCnt=3D15 MastHost- DefDir- DUL- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Control 0: C= =46lE+ CST- CFE- >>>> >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Config 0: ML= WI=3D16bit DwFcIn- MLWO=3D16bit DwFcOut- >>>>> LWI=3D16bit DwFcInEn- LWO=3D16bit DwFcOutEn- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Control 1: C= =46lE- CST- CFE- >>>> >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Config 1: ML= WI=3D8bit DwFcIn- MLWO=3D8bit DwFcOut- >>>>> LWI=3D8bit >>>>> DwFcInEn- LWO=3D8bit DwFcOutEn- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Revision ID: 1.03 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Frequency 0:= 1.0GHz >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Error 0: >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Frequency Ca= pability 0: 200MHz+ 300MHz+ 400MHz+ >>>>> 500MHz+ >>>>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Feature Capabilit= y: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- >>>>> UIDRD- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Frequency 1:= 200MHz >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Error 1: >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Frequency Ca= pability 1: 200MHz- 300MHz- 400MHz- >>>>> 500MHz- >>>>> 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Error Handling: P= =46lE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- >>>>> SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Prefetchable memo= ry behind bridge Upper: 00-00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Bus Number: 00 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [dc] HyperTransport: MSI Mappin= g Enable+ Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> >>>>> 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: I/O ports at 2f00 [size=3D128] >>>>> >>>>> 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem- BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin A routed to IRQ 10 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: I/O ports at dc00 [size=3D64] >>>>> =C2=A0 =C2=A0 =C2=A0Region 4: I/O ports at 2d00 [size=3D64] >>>>> =C2=A0 =C2=A0 =C2=A0Region 5: I/O ports at 2e00 [size=3D64] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0-,D1-,D2-,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: nForce2_smbus >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: i2c-nforce2 >>>>> >>>>> 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (= rev >>>>> a1) >>>>> (prog-if 10 [OHCI]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (750ns min, 250ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin A routed to IRQ 22 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: Memory at feafb000 (32-bit, non-pre= fetchable) [size=3D4K] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1+ D2+ AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: ohci_hcd >>>>> >>>>> 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (= rev >>>>> a2) >>>>> (prog-if 20 [EHCI]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (750ns min, 250ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin B routed to IRQ 23 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: Memory at feafac00 (32-bit, non-pre= fetchable) [size=3D256] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Debug port: BAR=3D1 offset= =3D0098 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1+ D2+ AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: ehci_hcd >>>>> >>>>> 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (pro= g-if >>>>> 8a >>>>> [Master SecP PriP]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (750ns min, 250ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: [virtual] Memory at 000001f0 (32-bi= t, non-prefetchable) >>>>> [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: [virtual] Memory at 000003f0 (type = 3, non-prefetchable) >>>>> [size=3D1] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: [virtual] Memory at 00000170 (32-bi= t, non-prefetchable) >>>>> [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 3: [virtual] Memory at 00000370 (type = 3, non-prefetchable) >>>>> [size=3D1] >>>>> =C2=A0 =C2=A0 =C2=A0Region 4: I/O ports at ffa0 [size=3D16] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pata_amd >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: ata_generic, pata_acpi, pata_= amd >>>>> >>>>> 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (= rev >>>>> a3) >>>>> (prog-if 85 [Master SecO PriO]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (750ns min, 250ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin A routed to IRQ 21 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: I/O ports at d480 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: I/O ports at d400 [size=3D4] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: I/O ports at d080 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 3: I/O ports at d000 [size=3D4] >>>>> =C2=A0 =C2=A0 =C2=A0Region 4: I/O ports at cc00 [size=3D16] >>>>> =C2=A0 =C2=A0 =C2=A0Region 5: Memory at feaf9000 (32-bit, non-pre= fetchable) [size=3D4K] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [b0] MSI: Mask- 64bit+ Count=3D= 1/4 Enable- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= 00000000 =C2=A0Data: 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [cc] HyperTransport: MSI Mappin= g Enable- Fixed+ >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: sata_nv >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: ata_generic, pata_acpi, sata_= nv >>>>> >>>>> 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (= rev >>>>> a3) >>>>> (prog-if 85 [Master SecO PriO]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (750ns min, 250ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin B routed to IRQ 20 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: I/O ports at c880 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: I/O ports at c800 [size=3D4] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: I/O ports at c480 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 3: I/O ports at c400 [size=3D4] >>>>> =C2=A0 =C2=A0 =C2=A0Region 4: I/O ports at c080 [size=3D16] >>>>> =C2=A0 =C2=A0 =C2=A0Region 5: Memory at feaf8000 (32-bit, non-pre= fetchable) [size=3D4K] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [b0] MSI: Mask- 64bit+ Count=3D= 1/4 Enable- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= 00000000 =C2=A0Data: 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [cc] HyperTransport: MSI Mappin= g Enable- Fixed+ >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: sata_nv >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: ata_generic, pata_acpi, sata_= nv >>>>> >>>>> 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (= rev >>>>> a3) >>>>> (prog-if 85 [Master SecO PriO]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (750ns min, 250ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin C routed to IRQ 23 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: I/O ports at c000 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: I/O ports at bc00 [size=3D4] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: I/O ports at b880 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 3: I/O ports at b800 [size=3D4] >>>>> =C2=A0 =C2=A0 =C2=A0Region 4: I/O ports at b480 [size=3D16] >>>>> =C2=A0 =C2=A0 =C2=A0Region 5: Memory at feaf7000 (32-bit, non-pre= fetchable) [size=3D4K] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [b0] MSI: Mask- 64bit+ Count=3D= 1/4 Enable- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= 00000000 =C2=A0Data: 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [cc] HyperTransport: MSI Mappin= g Enable- Fixed+ >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: sata_nv >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: ata_generic, pata_acpi, sata_= nv >>>>> >>>>> 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) >>>>> (prog-if >>>>> 01 >>>>> [Subtractive decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D01, subordinat= e=3D01, sec-latency=3D64 >>>>> =C2=A0 =C2=A0 =C2=A0I/O behind bridge: 0000e000-0000efff >>>>> =C2=A0 =C2=A0 =C2=A0Memory behind bridge: feb00000-febfffff >>>>> =C2=A0 =C2=A0 =C2=A0Prefetchable memory behind bridge: f8000000-f= bffffff >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B+ ParErr- DEV= SEL=3Dmedium >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr+ DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [b8] Subsystem: nVidia Corporat= ion Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [8c] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> >>>>> 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (250ns min, 5000ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin A routed to IRQ 30 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: Memory at feaf6000 (32-bit, non-pre= fetchable) [size=3D4K] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: I/O ports at b400 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: Memory at feafa800 (32-bit, non-pre= fetchable) [size=3D256] >>>>> =C2=A0 =C2=A0 =C2=A0Region 3: Memory at feafa400 (32-bit, non-pre= fetchable) [size=3D16] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1+ D2+ AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able+ DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [70] MSI-X: Enable- Mask- TabSi= ze=3D8 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Vector table: BAR= =3D2 offset=3D00000000 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PBA: BAR=3D3 offs= et=3D00000000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask+ 64bit+ Count=3D= 1/8 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0400c =C2=A0Data: 4199 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Masking: 000000fe= =C2=A0Pending: 00000000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [6c] HyperTransport: MSI Mappin= g Enable- Fixed+ >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: forcedeth >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: forcedeth >>>>> >>>>> 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: nVidia Corporation Device cb84 >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0 (250ns min, 5000ns max) >>>>> =C2=A0 =C2=A0 =C2=A0Interrupt: pin A routed to IRQ 31 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: Memory at feaf5000 (32-bit, non-pre= fetchable) [size=3D4K] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: I/O ports at b080 [size=3D8] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: Memory at feafa000 (32-bit, non-pre= fetchable) [size=3D256] >>>>> =C2=A0 =C2=A0 =C2=A0Region 3: Memory at feaf4c00 (32-bit, non-pre= fetchable) [size=3D16] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [44] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1+ D2+ AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able+ DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [70] MSI-X: Enable- Mask- TabSi= ze=3D8 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Vector table: BAR= =3D2 offset=3D00000000 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PBA: BAR=3D3 offs= et=3D00000000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask+ 64bit+ Count=3D= 1/8 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0200c =C2=A0Data: 41a1 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Masking: 000000fe= =C2=A0Pending: 00000000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [6c] HyperTransport: MSI Mappin= g Enable- Fixed+ >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: forcedeth >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: forcedeth >>>>> >>>>> 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (= rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0, Cache Line Size: 64 bytes >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D02, subordinat= e=3D02, sec-latency=3D0 >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr- DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Subsystem: nVidia Corporat= ion Device 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [48] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask- 64bit+ Count=3D= 1/2 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0f00c =C2=A0Data: 4149 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [60] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Express (v1) Root Port (Sl= ot+), MSI 00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCap: MaxPayloa= d 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtTag- RBE+ FLReset- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCtl: Report er= rors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevSta: CorrErr- = UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCap: Port #5, = Speed 2.5GT/s, Width x8, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ClockPM- Surprise- LLActRep+ BwNot- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCtl: ASPM Disa= bled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkSta: Speed 2.5= GT/s, Width x8, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCap: AttnBtn- = PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Slot # =C2=A00, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCtl: Enable: A= ttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltSta: Status: A= ttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Changed: MRL- PresDet- LinkState- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCtl: ErrCorre= ctable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCap: CRSVisib= le- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootSta: PME ReqI= D 0000, PMEStatus- PMEPending- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [100] Virtual Channel >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pcieport-driver >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: shpchp >>>>> >>>>> 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (= rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0, Cache Line Size: 64 bytes >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D03, subordinat= e=3D03, sec-latency=3D0 >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr- DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Subsystem: nVidia Corporat= ion Device 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [48] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask- 64bit+ Count=3D= 1/2 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0f00c =C2=A0Data: 4151 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [60] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Express (v1) Root Port (Sl= ot+), MSI 00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCap: MaxPayloa= d 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtTag- RBE+ FLReset- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCtl: Report er= rors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevSta: CorrErr- = UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCap: Port #4, = Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ClockPM- Surprise- LLActRep+ BwNot- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCtl: ASPM Disa= bled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkSta: Speed 2.5= GT/s, Width x4, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCap: AttnBtn- = PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Slot # =C2=A00, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCtl: Enable: A= ttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltSta: Status: A= ttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Changed: MRL- PresDet- LinkState- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCtl: ErrCorre= ctable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCap: CRSVisib= le- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootSta: PME ReqI= D 0000, PMEStatus- PMEPending- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [100] Virtual Channel >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pcieport-driver >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: shpchp >>>>> >>>>> 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (= rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0, Cache Line Size: 64 bytes >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D04, subordinat= e=3D04, sec-latency=3D0 >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr- DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Subsystem: nVidia Corporat= ion Device 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [48] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask- 64bit+ Count=3D= 1/2 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0f00c =C2=A0Data: 4159 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [60] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Express (v1) Root Port (Sl= ot+), MSI 00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCap: MaxPayloa= d 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtTag- RBE+ FLReset- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCtl: Report er= rors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevSta: CorrErr- = UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCap: Port #3, = Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ClockPM- Surprise- LLActRep+ BwNot- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCtl: ASPM Disa= bled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkSta: Speed 2.5= GT/s, Width x4, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCap: AttnBtn- = PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Slot # =C2=A00, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCtl: Enable: A= ttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltSta: Status: A= ttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Changed: MRL- PresDet- LinkState- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCtl: ErrCorre= ctable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCap: CRSVisib= le- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootSta: PME ReqI= D 0000, PMEStatus- PMEPending- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [100] Virtual Channel >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pcieport-driver >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: shpchp >>>>> >>>>> 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (= rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0, Cache Line Size: 64 bytes >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D05, subordinat= e=3D05, sec-latency=3D0 >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr- DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Subsystem: nVidia Corporat= ion Device 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [48] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask- 64bit+ Count=3D= 1/2 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0f00c =C2=A0Data: 4161 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [60] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Express (v1) Root Port (Sl= ot+), MSI 00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCap: MaxPayloa= d 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtTag- RBE+ FLReset- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCtl: Report er= rors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevSta: CorrErr- = UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCap: Port #2, = Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ClockPM- Surprise- LLActRep+ BwNot- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCtl: ASPM Disa= bled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkSta: Speed 2.5= GT/s, Width x4, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCap: AttnBtn- = PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Slot # =C2=A00, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCtl: Enable: A= ttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltSta: Status: A= ttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Changed: MRL- PresDet- LinkState- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCtl: ErrCorre= ctable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCap: CRSVisib= le- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootSta: PME ReqI= D 0000, PMEStatus- PMEPending- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [100] Virtual Channel >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pcieport-driver >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: shpchp >>>>> >>>>> 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (= rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0, Cache Line Size: 64 bytes >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D06, subordinat= e=3D06, sec-latency=3D0 >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr- DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Subsystem: nVidia Corporat= ion Device 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [48] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask- 64bit+ Count=3D= 1/2 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0f00c =C2=A0Data: 4169 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [60] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Express (v1) Root Port (Sl= ot+), MSI 00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCap: MaxPayloa= d 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtTag- RBE+ FLReset- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCtl: Report er= rors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevSta: CorrErr- = UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCap: Port #1, = Speed 2.5GT/s, Width x1, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ClockPM- Surprise- LLActRep+ BwNot- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCtl: ASPM Disa= bled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkSta: Speed 2.5= GT/s, Width x8, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCap: AttnBtn- = PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Slot # =C2=A00, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCtl: Enable: A= ttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltSta: Status: A= ttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Changed: MRL- PresDet- LinkState- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCtl: ErrCorre= ctable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCap: CRSVisib= le- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootSta: PME ReqI= D 0000, PMEStatus- PMEPending- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [100] Virtual Channel >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pcieport-driver >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: shpchp >>>>> >>>>> 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (= rev >>>>> a3) >>>>> (prog-if 00 [Normal decode]) >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster+ SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx+ >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Latency: 0, Cache Line Size: 64 bytes >>>>> =C2=A0 =C2=A0 =C2=A0Bus: primary=3D00, secondary=3D07, subordinat= e=3D07, sec-latency=3D0 >>>>> =C2=A0 =C2=A0 =C2=A0Secondary status: 66MHz- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> >>>> =C2=A0 =C2=A0 =C2=A0BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- = >Reset- FastB2B- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0PriDiscTmr- SecDi= scTmr- DiscTmrStat- DiscTmrSERREn- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Subsystem: nVidia Corporat= ion Device 0000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [48] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1- D2- AuxCurrent=3D0mA >>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [50] MSI: Mask- 64bit+ Count=3D= 1/2 Enable+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Address: 00000000= fee0f00c =C2=A0Data: 4171 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [60] HyperTransport: MSI Mappin= g Enable- Fixed- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Mapping Address B= ase: 00000000fee00000 >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] Express (v1) Root Port (Sl= ot+), MSI 00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCap: MaxPayloa= d 256 bytes, PhantFunc 0, Latency L0s >>>>> <64ns, >>>>> L1 <1us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtTag- RBE+ FLReset- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevCtl: Report er= rors: Correctable- Non-Fatal- Fatal- >>>>> Unsupported- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0MaxPayload 128 bytes, MaxReadReq 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DevSta: CorrErr- = UncorrErr- FatalErr- UnsuppReq- AuxPwr- >>>>> TransPend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCap: Port #0, = Speed 2.5GT/s, Width x16, ASPM L0s L1, >>>>> Latency L0 <512ns, L1 <4us >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ClockPM- Surprise- LLActRep+ BwNot- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkCtl: ASPM Disa= bled; RCB 64 bytes Disabled- Retrain- >>>>> CommClk- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0LnkSta: Speed 2.5= GT/s, Width x16, TrErr- Train- SlotClk+ >>>>> DLActive- BWMgmt- ABWMgmt- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCap: AttnBtn- = PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- >>>>> Surpise- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Slot # =C2=A00, PowerLimit 0.000000; Interlock- >>>>> NoCompl- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltCtl: Enable: A= ttnBtn- PwrFlt- MRL- PresDet- CmdCplt- >>>>> HPIrq- LinkChg- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Control: AttnInd Off, PwrInd On, Power- Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SltSta: Status: A= ttnBtn- PowerFlt- MRL- CmdCplt- PresDet- >>>>> Interlock- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2= =A0 =C2=A0Changed: MRL- PresDet- LinkState- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCtl: ErrCorre= ctable- ErrNon-Fatal- ErrFatal- >>>>> PMEIntEna- >>>>> CRSVisible- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootCap: CRSVisib= le- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0RootSta: PME ReqI= D 0000, PMEStatus- PMEPending- >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [100] Virtual Channel >>>>> =C2=A0 =C2=A0 =C2=A0Kernel driver in use: pcieport-driver >>>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: shpchp >>>>> >>>>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opt= eron, >>>>> Athlon64, Sempron] HyperTransport Configuration >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [80] HyperTransport: Host or Se= condary Interface >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Command: WarmRst+= DblEnd- DevNum=3D0 ChainSide- HostHide+ >>>>> Slave- >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Control: CFl= E- CST- CFE- >>>> >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Config: MLWI= =3D16bit DwFcIn- MLWO=3D16bit DwFcOut- >>>>> LWI=3D16bit >>>>> DwFcInEn- LWO=3D16bit DwFcOutEn- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Revision ID: 3.00 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Frequency: 1= =2E0GHz >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Error: >>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Link Frequency Ca= pability: 200MHz+ 300MHz- 400MHz+ 500MHz- >>>>> 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz+ 1.4GHz- 1.6GHz- Vend- >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Feature Capabilit= y: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA+ >>>>> UIDRD- ExtRS- UCnfE- >>>>> >>>>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opt= eron, >>>>> Athlon64, Sempron] Address Map >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> >>>>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opt= eron, >>>>> Athlon64, Sempron] DRAM Controller >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Kernel modules: amd64_edac_mod >>>>> >>>>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opt= eron, >>>>> Athlon64, Sempron] Miscellaneous Control >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [f0] Secure device >>>>> >>>>> 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opt= eron, >>>>> Athlon64, Sempron] Link Control >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O- Mem- BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEV= SEL=3Dfast >TAbort- >>>>> SERR- >>>> >>>>> 01:0a.0 VGA compatible controller: XGI Technology Inc. (eXtreme >>>>> Graphics >>>>> Innovation) Volari Z7/Z9/Z9s (prog-if 00 [VGA controller]) >>>>> =C2=A0 =C2=A0 =C2=A0Subsystem: XGI Technology Inc. (eXtreme Graph= ics Innovation) >>>>> Volari >>>>> Z7/Z9/Z9s >>>>> =C2=A0 =C2=A0 =C2=A0Control: I/O+ Mem+ BusMaster- SpecCycle- MemW= INV- VGASnoop- >>>>> ParErr- >>>>> Stepping- SERR- FastB2B- DisINTx- >>>>> =C2=A0 =C2=A0 =C2=A0Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEV= SEL=3Dmedium >TAbort- >>>>> SERR- >>>> =C2=A0 =C2=A0 =C2=A0BIST result: 00 >>>>> =C2=A0 =C2=A0 =C2=A0Region 0: Memory at f8000000 (32-bit, prefetc= hable) [size=3D64M] >>>>> =C2=A0 =C2=A0 =C2=A0Region 1: Memory at febc0000 (32-bit, non-pre= fetchable) >>>>> [size=3D256K] >>>>> =C2=A0 =C2=A0 =C2=A0Region 2: I/O ports at ec00 [size=3D128] >>>>> =C2=A0 =C2=A0 =C2=A0Expansion ROM at [disabled] >>>>> =C2=A0 =C2=A0 =C2=A0Capabilities: [40] Power Management version 2 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Flags: PMEClk- DS= I- D1+ D2+ AuxCurrent=3D0mA >>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Status: D0 PME-En= able- DSel=3D0 DScale=3D0 PME- >>>>> >>>>> >>>>> >>>>> /dev/sda: >>>>> >>>>> ATA device, with non-removable media >>>>> =C2=A0 =C2=A0 =C2=A0Model Number: =C2=A0 =C2=A0 =C2=A0 WDC WD5000= AAKS-00A7B2 >>>>> =C2=A0 =C2=A0 =C2=A0Serial Number: =C2=A0 =C2=A0 =C2=A0WD-WCASZ03= 21108 >>>>> =C2=A0 =C2=A0 =C2=A0Firmware Revision: =C2=A001.03B01 >>>>> =C2=A0 =C2=A0 =C2=A0Transport: =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= Serial, SATA 1.0a, SATA II Extensions, SATA >>>>> Rev >>>>> 2.5 >>>>> Standards: >>>>> =C2=A0 =C2=A0 =C2=A0Supported: 8 7 6 5 >>>>> =C2=A0 =C2=A0 =C2=A0Likely used: 8 >>>>> Configuration: >>>>> =C2=A0 =C2=A0 =C2=A0Logical =C2=A0 =C2=A0 =C2=A0 =C2=A0 max =C2=A0= =C2=A0 current >>>>> =C2=A0 =C2=A0 =C2=A0cylinders =C2=A0 =C2=A0 =C2=A0 16383 =C2=A0 1= 6383 >>>>> =C2=A0 =C2=A0 =C2=A0heads =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 16 =C2= =A0 =C2=A0 =C2=A016 >>>>> =C2=A0 =C2=A0 =C2=A0sectors/track =C2=A0 63 =C2=A0 =C2=A0 =C2=A06= 3 >>>>> =C2=A0 =C2=A0 =C2=A0-- >>>>> =C2=A0 =C2=A0 =C2=A0CHS current addressable sectors: =C2=A0 16514= 064 >>>>> =C2=A0 =C2=A0 =C2=A0LBA =C2=A0 =C2=A0user addressable sectors: =C2= =A0268435455 >>>>> =C2=A0 =C2=A0 =C2=A0LBA48 =C2=A0user addressable sectors: =C2=A09= 76773168 >>>>> =C2=A0 =C2=A0 =C2=A0Logical/Physical Sector size: =C2=A0 =C2=A0 =C2= =A0 =C2=A0 =C2=A0 512 bytes >>>>> =C2=A0 =C2=A0 =C2=A0device size with M =3D 1024*1024: =C2=A0 =C2=A0= =C2=A0476940 MBytes >>>>> =C2=A0 =C2=A0 =C2=A0device size with M =3D 1000*1000: =C2=A0 =C2=A0= =C2=A0500107 MBytes (500 GB) >>>>> =C2=A0 =C2=A0 =C2=A0cache/buffer size =C2=A0=3D 16384 KBytes >>>>> Capabilities: >>>>> =C2=A0 =C2=A0 =C2=A0LBA, IORDY(can be disabled) >>>>> =C2=A0 =C2=A0 =C2=A0Queue depth: 32 >>>>> =C2=A0 =C2=A0 =C2=A0Standby timer values: spec'd by Standard, wit= h device specific >>>>> minimum >>>>> =C2=A0 =C2=A0 =C2=A0R/W multiple sector transfer: Max =3D 16 =C2=A0= Current =3D 16 >>>>> =C2=A0 =C2=A0 =C2=A0Recommended acoustic management value: 128, c= urrent value: 254 >>>>> =C2=A0 =C2=A0 =C2=A0DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma= 3 udma4 udma5 *udma6 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Cycle time: min=3D120ns recomm= ended=3D120ns >>>>> =C2=A0 =C2=A0 =C2=A0PIO: pio0 pio1 pio2 pio3 pio4 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Cycle time: no flow control=3D= 120ns =C2=A0IORDY flow control=3D120ns >>>>> Commands/features: >>>>> =C2=A0 =C2=A0 =C2=A0Enabled Supported: >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SMART feature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Security Mode fea= ture set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Power Management featu= re set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Write cache >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Look-ahead >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Host Protected Area fe= ature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0WRITE_BUFFER command >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0READ_BUFFER command >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0NOP cmd >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0DOWNLOAD_MICROCODE >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Power-Up In Stand= by feature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SET_FEATURES required = to spinup after power up >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0SET_MAX security = extension >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0Automatic Acousti= c Management feature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A048-bit Address feature= set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Device Configuration O= verlay feature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Mandatory FLUSH_CACHE >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0FLUSH_CACHE_EXT >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SMART error logging >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SMART self-test >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0General Purpose Loggin= g feature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A064-bit World wide name >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Segmented DOWNLOAD_MIC= ROCODE >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Gen1 signaling speed (= 1.5Gb/s) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Gen2 signaling speed (= 3.0Gb/s) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Native Command Queuein= g (NCQ) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Host-initiated interfa= ce power management >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Phy event counters >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0DMA Setup Auto-Ac= tivate optimization >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0Software settings pres= ervation >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SMART Command Transpor= t (SCT) feature set >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SCT Long Sector Access= (AC1) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SCT LBA Segment Access= (AC2) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SCT Error Recovery Con= trol (AC3) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SCT Features Control (= AC4) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 * =C2=A0 =C2=A0SCT Data Tables (AC5) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0unknown 206[12] (= vendor specific) >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0unknown 206[13] (= vendor specific) >>>>> Security: >>>>> =C2=A0 =C2=A0 =C2=A0Master password revision code =3D 65534 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0supported >>>>> =C2=A0 =C2=A0 =C2=A0not =C2=A0 =C2=A0 enabled >>>>> =C2=A0 =C2=A0 =C2=A0not =C2=A0 =C2=A0 locked >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0frozen >>>>> =C2=A0 =C2=A0 =C2=A0not =C2=A0 =C2=A0 expired: security count >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0supported: enhanc= ed erase >>>>> =C2=A0 =C2=A0 =C2=A084min for SECURITY ERASE UNIT. 84min for ENHA= NCED SECURITY ERASE >>>>> UNIT. >>>>> Logical Unit WWN Device Identifier: 50014ee101cedc24 >>>>> =C2=A0 =C2=A0 =C2=A0NAA =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0= : 5 >>>>> =C2=A0 =C2=A0 =C2=A0IEEE OUI =C2=A0 =C2=A0 =C2=A0 =C2=A0: 0014ee >>>>> =C2=A0 =C2=A0 =C2=A0Unique ID =C2=A0 =C2=A0 =C2=A0 : 101cedc24 >>>>> Checksum: correct >>>>> >>>>> /dev/md0: >>>>> =C2=A0 =C2=A0 =C2=A0Version : 0.90 >>>>> =C2=A0Creation Time : Mon Jul 27 22:38:26 2009 >>>>> =C2=A0 Raid Level : raid1 >>>>> =C2=A0 Array Size : 102336 (99.95 MiB 104.79 MB) >>>>> =C2=A0Used Dev Size : 102336 (99.95 MiB 104.79 MB) >>>>> =C2=A0Raid Devices : 4 >>>>> =C2=A0Total Devices : 4 >>>>> Preferred Minor : 0 >>>>> =C2=A0Persistence : Superblock is persistent >>>>> >>>>> =C2=A0Update Time : Mon Sep 21 11:02:14 2009 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0State : clean >>>>> =C2=A0Active Devices : 4 >>>>> Working Devices : 4 >>>>> =C2=A0Failed Devices : 0 >>>>> =C2=A0Spare Devices : 0 >>>>> >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 UUID : 9037def2:035b0d10:bfe78010:bc8= 10f04 >>>>> =C2=A0 =C2=A0 =C2=A0 Events : 0.44 >>>>> >>>>> =C2=A0Number =C2=A0 Major =C2=A0 Minor =C2=A0 RaidDevice State >>>>> =C2=A0 =C2=A0 0 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 =C2=A0= 1 =C2=A0 =C2=A0 =C2=A0 =C2=A00 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /= dev/sda1 >>>>> =C2=A0 =C2=A0 1 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 17 =C2= =A0 =C2=A0 =C2=A0 =C2=A01 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= db1 >>>>> =C2=A0 =C2=A0 2 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 33 =C2= =A0 =C2=A0 =C2=A0 =C2=A02 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= dc1 >>>>> =C2=A0 =C2=A0 3 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 49 =C2= =A0 =C2=A0 =C2=A0 =C2=A03 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= dd1 >>>>> /dev/md1: >>>>> =C2=A0 =C2=A0 =C2=A0Version : 0.90 >>>>> =C2=A0Creation Time : Mon Jul 27 22:38:28 2009 >>>>> =C2=A0 Raid Level : raid1 >>>>> =C2=A0 Array Size : 4095936 (3.91 GiB 4.19 GB) >>>>> =C2=A0Used Dev Size : 4095936 (3.91 GiB 4.19 GB) >>>>> =C2=A0Raid Devices : 4 >>>>> =C2=A0Total Devices : 4 >>>>> Preferred Minor : 1 >>>>> =C2=A0Persistence : Superblock is persistent >>>>> >>>>> =C2=A0Update Time : Mon Sep 21 11:02:14 2009 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0State : clean >>>>> =C2=A0Active Devices : 4 >>>>> Working Devices : 4 >>>>> =C2=A0Failed Devices : 0 >>>>> =C2=A0Spare Devices : 0 >>>>> >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 UUID : 642c2833:bf033a7d:bfe78010:bc8= 10f04 >>>>> =C2=A0 =C2=A0 =C2=A0 Events : 0.44 >>>>> >>>>> =C2=A0Number =C2=A0 Major =C2=A0 Minor =C2=A0 RaidDevice State >>>>> =C2=A0 =C2=A0 0 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 =C2=A0= 2 =C2=A0 =C2=A0 =C2=A0 =C2=A00 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /= dev/sda2 >>>>> =C2=A0 =C2=A0 1 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 18 =C2= =A0 =C2=A0 =C2=A0 =C2=A01 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= db2 >>>>> =C2=A0 =C2=A0 2 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 34 =C2= =A0 =C2=A0 =C2=A0 =C2=A02 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= dc2 >>>>> =C2=A0 =C2=A0 3 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 50 =C2= =A0 =C2=A0 =C2=A0 =C2=A03 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= dd2 >>>>> /dev/md2: >>>>> =C2=A0 =C2=A0 =C2=A0Version : 0.90 >>>>> =C2=A0Creation Time : Mon Jul 27 22:38:30 2009 >>>>> =C2=A0 Raid Level : raid1 >>>>> =C2=A0 Array Size : 484185536 (461.76 GiB 495.81 GB) >>>>> =C2=A0Used Dev Size : 484185536 (461.76 GiB 495.81 GB) >>>>> =C2=A0Raid Devices : 4 >>>>> =C2=A0Total Devices : 4 >>>>> Preferred Minor : 2 >>>>> =C2=A0Persistence : Superblock is persistent >>>>> >>>>> =C2=A0Update Time : Mon Sep 21 11:02:24 2009 >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0State : clean >>>>> =C2=A0Active Devices : 4 >>>>> Working Devices : 4 >>>>> =C2=A0Failed Devices : 0 >>>>> =C2=A0Spare Devices : 0 >>>>> >>>>> =C2=A0 =C2=A0 =C2=A0 =C2=A0 UUID : ce106d52:0c0373f7:bfe78010:bc8= 10f04 >>>>> =C2=A0 =C2=A0 =C2=A0 Events : 0.66 >>>>> >>>>> =C2=A0Number =C2=A0 Major =C2=A0 Minor =C2=A0 RaidDevice State >>>>> =C2=A0 =C2=A0 0 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 =C2=A0= 3 =C2=A0 =C2=A0 =C2=A0 =C2=A00 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /= dev/sda3 >>>>> =C2=A0 =C2=A0 1 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 19 =C2= =A0 =C2=A0 =C2=A0 =C2=A01 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= db3 >>>>> =C2=A0 =C2=A0 2 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 35 =C2= =A0 =C2=A0 =C2=A0 =C2=A02 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= dc3 >>>>> =C2=A0 =C2=A0 3 =C2=A0 =C2=A0 =C2=A0 8 =C2=A0 =C2=A0 =C2=A0 51 =C2= =A0 =C2=A0 =C2=A0 =C2=A03 =C2=A0 =C2=A0 =C2=A0active sync =C2=A0 /dev/s= dd3 >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> >>> >> >> >> >> > > --=20 Majed B. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html