From: Christopher Chen <muffaleta@gmail.com>
To: Brett Russ <bruss@netezza.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: Why does one get mismatches?
Date: Wed, 20 Jan 2010 15:01:37 -0800 [thread overview]
Message-ID: <7bc80d501001201501o41eb194fgae8b3d40d8c48f0e@mail.gmail.com> (raw)
In-Reply-To: <hj80v1$rap$1@ger.gmane.org>
I keep misreading the the subject of this email thread as:
"Why does one get mustaches?"
cc
On Wed, Jan 20, 2010 at 2:43 PM, Brett Russ <bruss@netezza.com> wrote:
> On 01/20/2010 05:30 PM, Majed B. wrote:
>>
>> He needs to run a full offline or long test before checking with
>> smartctl -a -- since it won't show any sector errors if those tests
>> weren't run at least once.
>
> Not sure I agree with that. The md checks he's been doing will cause a read
> of all data regions of the relevant partition and if the disk is throwing
> errors, those sectors should be marked probational. Then, if a subsequent
> repair ends up remapping them, those sectors will show up as remapped.
>
> The grep will show both probational and remapped sector counts for each
> drive.
>
> BTW, the cmd should also include an echo so it's easy to tell which drive is
> being reported:
>
> for di in a b c d e f g; do echo $di; smartctl -a /dev/sd$di | grep -i
> _sect; done
>
> -BR
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Chris Chen <muffaleta@gmail.com>
"The fact that yours is better than anyone else's
is not a guarantee that it's any good."
-- Motivational Poster
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-01-20 23:01 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-20 15:03 Why does one get mismatches? Jon Hardcastle
2010-01-20 15:34 ` Brett Russ
2010-01-20 20:44 ` Majed B.
2010-01-20 22:25 ` Brett Russ
2010-01-20 22:30 ` Majed B.
2010-01-20 22:43 ` Brett Russ
2010-01-20 23:01 ` Christopher Chen [this message]
2010-01-21 4:17 ` Steven Haigh
2010-01-21 8:08 ` Asdo
2010-01-21 10:52 ` Steven Haigh
2010-01-21 11:48 ` Farkas Levente
2010-01-21 12:15 ` Jon Hardcastle
-- strict thread matches above, loose matches on Subject: below --
2010-02-01 23:14 Jon Hardcastle
2010-01-25 20:43 greg
2010-01-25 22:49 ` Steven Haigh
2010-01-27 21:54 ` Tirumala Reddy Marri
2010-01-28 9:16 ` Jon Hardcastle
2010-01-28 10:29 ` Asdo
2010-01-28 17:20 ` Tirumala Reddy Marri
2010-01-28 18:23 ` Goswin von Brederlow
2010-01-28 19:03 ` Tirumala Reddy Marri
2010-01-28 20:24 ` Goswin von Brederlow
2010-01-29 15:37 ` Jon Hardcastle
2010-01-29 23:52 ` Goswin von Brederlow
2010-01-30 10:39 ` Jon Hardcastle
2010-02-01 21:10 ` Bill Davidsen
2010-01-20 11:52 Fw: " Jon Hardcastle
2010-02-01 21:18 ` Bill Davidsen
2010-02-01 22:37 ` Neil Brown
2010-02-02 15:11 ` Bill Davidsen
2010-02-03 11:17 ` Goswin von Brederlow
2010-02-11 5:14 ` Neil Brown
2010-02-11 17:51 ` Bryan Mesich
2010-02-16 21:25 ` Bill Davidsen
2010-02-16 21:38 ` Steven Haigh
2010-02-17 3:19 ` Bryan Mesich
2010-02-17 23:05 ` Neil Brown
2010-02-19 15:18 ` Piergiorgio Sartor
2010-02-19 22:02 ` Neil Brown
2010-02-19 22:37 ` Piergiorgio Sartor
2010-02-19 23:34 ` Asdo
2010-02-20 4:27 ` Goswin von Brederlow
2010-02-20 11:12 ` Asdo
2010-02-21 11:13 ` Goswin von Brederlow
[not found] ` <8754A21825504719B463AD9809E54349@m5>
[not found] ` <20100221194400.GA2570@lazy.lzy>
2010-02-22 13:01 ` Asdo
2010-02-22 13:30 ` Piergiorgio Sartor
2010-02-22 13:44 ` Piergiorgio Sartor
2010-02-24 19:42 ` Bill Davidsen
2010-02-20 4:23 ` Goswin von Brederlow
2010-02-24 14:54 ` Bill Davidsen
2010-02-24 21:37 ` Neil Brown
2010-02-26 20:48 ` Bill Davidsen
2010-02-26 21:09 ` Neil Brown
2010-02-26 22:01 ` Piergiorgio Sartor
2010-02-26 22:15 ` Bill Davidsen
2010-02-26 22:21 ` Piergiorgio Sartor
2010-02-26 22:20 ` Asdo
2010-02-27 6:01 ` Michael Evans
2010-02-28 0:01 ` Bill Davidsen
2010-02-24 14:46 ` Bill Davidsen
2010-02-24 16:12 ` Martin K. Petersen
2010-02-24 18:51 ` Piergiorgio Sartor
2010-02-24 22:21 ` Neil Brown
2010-02-25 8:41 ` Piergiorgio Sartor
2010-03-02 4:57 ` Neil Brown
2010-03-02 18:49 ` Piergiorgio Sartor
2010-02-24 21:39 ` Neil Brown
[not found] ` <4B8640A2.4060307@shiftmail.org>
2010-02-25 10:41 ` Neil Brown
2010-02-28 8:09 ` Luca Berra
2010-03-02 5:01 ` Neil Brown
2010-03-02 7:36 ` Luca Berra
2010-03-02 10:04 ` Michael Evans
2010-03-02 11:02 ` Luca Berra
2010-03-02 12:13 ` Michael Evans
2010-03-02 18:14 ` Asdo
2010-03-02 18:52 ` Piergiorgio Sartor
2010-03-02 23:27 ` Asdo
2010-03-03 9:13 ` Piergiorgio Sartor
2010-03-03 11:42 ` Asdo
2010-03-03 12:03 ` Piergiorgio Sartor
2010-03-02 20:17 ` Neil Brown
2010-02-24 21:32 ` Neil Brown
2010-02-25 7:22 ` Goswin von Brederlow
2010-02-25 7:39 ` Neil Brown
2010-02-25 8:47 ` John Robinson
2010-02-25 9:07 ` Neil Brown
2010-02-11 18:12 ` Piergiorgio Sartor
2010-01-19 10:04 Jon Hardcastle
2010-01-20 14:19 ` Brett Russ
2010-01-20 14:34 ` Jon Hardcastle
2010-01-20 14:46 ` Brett Russ
2010-02-01 20:48 ` Bill Davidsen
2010-01-22 16:22 ` Jon Hardcastle
2010-01-22 16:34 ` Asdo
2010-01-22 17:41 ` Brett Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7bc80d501001201501o41eb194fgae8b3d40d8c48f0e@mail.gmail.com \
--to=muffaleta@gmail.com \
--cc=bruss@netezza.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).