Re: Questions regarding startup of imsm container

[Randy Terbush <randy@terbush.org>]

Thanks Dan, a few more steps forward here. I suspect I know the
answer, but will see what you suggest.

On Tue, Mar 23, 2010 at 4:16 PM, Dan Williams <dan.j.williams@intel.com> wrote:
> This shows that Gentoo is most likely not including mdmon in their initramfs
> environment.  mdadm assembles the array readonly, but then mdmon is required
> to mark the array writable.

Looks like you are correct and current installation packages on Gentoo
have apparently not dealt with these changes. mdmon is not getting
started and is not being attempted anywhere.

I don't run an initrd, so attempted to start mdmon after the mdadm -As
runs. This is apparently too early in the process as I get the
following:

* Starting up RAID devices ...
 [ ok ]
mdmon: Neither /var/run nor /lib/init/rw are writable
       cannot create .pid or .sock files.  Aborting
 * Setting up the Logical Volume Manager ...
 [ ok ]
 * Checking local filesystems  ...
HOME-vg0: clean, 13/3276800 files, 256151/52428800 blocks
Warning... fsck.ext4 for device /dev/mapper/vg0-home exited with signal 11.
SVN-vg0: clean, 191/1638400 files, 153087/26214400 blocks
Warning... fsck.ext4 for device /dev/mapper/vg0-svn exited with signal 11.
ARCHIVE-vg0: clean, 12/1638400 files, 152150/26214400 blocks

So it appears the start of mdmon needs to wait until we have a rw
filesystem mounted. Not entirely sure if it is related, but as you can
see above, fsck blows up trying to check the filesystems on this
array. That appears to clear itself up once mdmon is running. After
starting mdmon by hand, the resync begins and I can successfully run
fsck on these partitions.

So looks like I have a chicken and egg problem that I suspect may be
solved by creating an initramfs. I took a quick pass at dracut but
could not convince it to add mdmon. Any hints appreciated as I go back
to dig for more info.

Thanks again for the assistance.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html