hello

hello

[Dhaval Patel]

Hi, everyone. I am new to this list. Currently I am trying to get IDE raid working with
the 3ware 7500-4 controller, using Western Digital 120GB drives. I am using Slackware
with 2.4.20 kernel. I have the OS installed and am using the latest driver (1.02.00.033)
that you can download from 3ware's website. I also applied the latest firmware that came
along with the driver. The bootup is fine, its just that when I try to move huge files
that the box freezes. Yesterday I was copying 50 550+MB files from one directory to
another and everything went well. This morning I am copying the same files to another
directory and it froze on the second file. After it freezes I can sometimes ping it and
sometimes I cannot. I havent seen anything in /var/log/messages. After a restart
everything seems fine.

Thanks in advanced for your help,
Dhaval 

Re: hello

[Dhaval Patel]

Sorry, I should have provided this information in the first email. I am using RAID 5 and
I downloaded the latest firmware. I think I found the problem though. Currently the box
is in my bedroom since I am testing it before I put it in its permanent location. And
since I actually want to get some sleep at night I turn the box off. Well I realized
that it just so happens that it shuts down the raid card at the very end. If you turn it
off too quickly the raid card cannot shutdown cleanly and the array is degraded. I wasnt
checking the array and assuming that everything was fine. There are no errors reported
in messages or syslog. I ran the CLI from 3ware and saw that the array is in fact
degraded. I rebuilt it and ran the tests again and everything seems fine. Here is the
information about the controller from the CLI

Driver:   1.02.00.033
Model:    7500-4
FW:       FE7X 1.05.00.049
BIOS:     BE7X 1.08.00.046
Monitor:  ME7X 1.01.00.035
PCB:      Rev3
PCHIP:    V1.30
ACHIP:    V3.20

I am actually running Slackware so I downloaded the driver for suse or redhat kernel I
dont remember which, and compiled it with the vanilla kernel that I download when I
install any box.

I did install the 3dm and launched it with 3dmd. But I cannot get to the web interface.
How can I do that. Does it offer the same features that the CLI offers?

Thanks,
Dhaval

Nick <Nick@pie.ie> said:

> Hi Dhaval,
> Did you download the source code for the driver and build it your self? What
> RAID level are you using?
> and what revision of firmware did you download. One common problem that
> causes this type of failure is a loose connection to one of your drives,
> either the parallel cable or the power cable, if can recheck these first it
> might help.
> Are you using 3DM, the web based management tool for 3Ware controllers, this
> will give you very detailed information on what is happening with your
> array.
> 
> Kind Regards,
> 
> Nick Gleeson
> 3Ware Applications Engineer
> Technical Support (Europe)
> Nick@pie.ie
> www.3ware.com
> Phone +353 61 702045
> 
> ----- Original Message -----
> From: Dhaval Patel <dhaval@patel.sh>
> To: <linux-raid@vger.kernel.org>
> Sent: Thursday, May 22, 2003 6:26 PM
> Subject: hello
> 
> 
> > Hi, everyone. I am new to this list. Currently I am trying to get IDE raid
> working with
> > the 3ware 7500-4 controller, using Western Digital 120GB drives. I am
> using Slackware
> > with 2.4.20 kernel. I have the OS installed and am using the latest driver
> (1.02.00.033)
> > that you can download from 3ware's website. I also applied the latest
> firmware that came
> > along with the driver. The bootup is fine, its just that when I try to
> move huge files
> > that the box freezes. Yesterday I was copying 50 550+MB files from one
> directory to
> > another and everything went well. This morning I am copying the same files
> to another
> > directory and it froze on the second file. After it freezes I can
> sometimes ping it and
> > sometimes I cannot. I havent seen anything in /var/log/messages. After a
> restart
> > everything seems fine.
> >
> > Thanks in advanced for your help,
> > Dhaval
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 



-- 

Re: hello

[Nick]

Hi Dhaval,
Yes, the shutdowns when using 3Ware controllers can take some time,
particularly when you have been dealing with large files,  doing unclean
shutdown will indeed put the array in to a degraded state.

The 3DM web based manager has all the functionality of the CLI and is much
easier on the eye, to use it point your browser to http://localhost:1080 You
will also find access to the controller logs and alarms from here, much
nicer that the CLI.

Hope this helped.
Kind Regards,

Nick Gleeson
3Ware Applications Engineer
Technical Support (Europe)
Nick@pie.ie
www.3ware.com
Phone +353 61 702045

----- Original Message -----
From: Dhaval Patel <dhaval@patel.sh>
To: <linux-raid@vger.kernel.org>
Sent: Friday, May 23, 2003 12:00 PM
Subject: Re: hello


> Sorry, I should have provided this information in the first email. I am
using RAID 5 and
> I downloaded the latest firmware. I think I found the problem though.
Currently the box
> is in my bedroom since I am testing it before I put it in its permanent
location. And
> since I actually want to get some sleep at night I turn the box off. Well
I realized
> that it just so happens that it shuts down the raid card at the very end.
If you turn it
> off too quickly the raid card cannot shutdown cleanly and the array is
degraded. I wasnt
> checking the array and assuming that everything was fine. There are no
errors reported
> in messages or syslog. I ran the CLI from 3ware and saw that the array is
in fact
> degraded. I rebuilt it and ran the tests again and everything seems fine.
Here is the
> information about the controller from the CLI
>
> Driver:   1.02.00.033
> Model:    7500-4
> FW:       FE7X 1.05.00.049
> BIOS:     BE7X 1.08.00.046
> Monitor:  ME7X 1.01.00.035
> PCB:      Rev3
> PCHIP:    V1.30
> ACHIP:    V3.20
>
> I am actually running Slackware so I downloaded the driver for suse or
redhat kernel I
> dont remember which, and compiled it with the vanilla kernel that I
download when I
> install any box.
>
> I did install the 3dm and launched it with 3dmd. But I cannot get to the
web interface.
> How can I do that. Does it offer the same features that the CLI offers?
>
> Thanks,
> Dhaval
>
> Nick <Nick@pie.ie> said:
>
> > Hi Dhaval,
> > Did you download the source code for the driver and build it your self?
What
> > RAID level are you using?
> > and what revision of firmware did you download. One common problem that
> > causes this type of failure is a loose connection to one of your drives,
> > either the parallel cable or the power cable, if can recheck these first
it
> > might help.
> > Are you using 3DM, the web based management tool for 3Ware controllers,
this
> > will give you very detailed information on what is happening with your
> > array.
> >
> > Kind Regards,
> >
> > Nick Gleeson
> > 3Ware Applications Engineer
> > Technical Support (Europe)
> > Nick@pie.ie
> > www.3ware.com
> > Phone +353 61 702045
> >
> > ----- Original Message -----
> > From: Dhaval Patel <dhaval@patel.sh>
> > To: <linux-raid@vger.kernel.org>
> > Sent: Thursday, May 22, 2003 6:26 PM
> > Subject: hello
> >
> >
> > > Hi, everyone. I am new to this list. Currently I am trying to get IDE
raid
> > working with
> > > the 3ware 7500-4 controller, using Western Digital 120GB drives. I am
> > using Slackware
> > > with 2.4.20 kernel. I have the OS installed and am using the latest
driver
> > (1.02.00.033)
> > > that you can download from 3ware's website. I also applied the latest
> > firmware that came
> > > along with the driver. The bootup is fine, its just that when I try to
> > move huge files
> > > that the box freezes. Yesterday I was copying 50 550+MB files from one
> > directory to
> > > another and everything went well. This morning I am copying the same
files
> > to another
> > > directory and it froze on the second file. After it freezes I can
> > sometimes ping it and
> > > sometimes I cannot. I havent seen anything in /var/log/messages. After
a
> > restart
> > > everything seems fine.
> > >
> > > Thanks in advanced for your help,
> > > Dhaval
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-raid"
in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > >
> >
>
>
>
> --
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Re: hello

[Dhaval Patel]

Hmm, I have been doing some testing and this morning I turned on the box, went to the
CLI and made sure that the array was fine, but it still crashed when trying to copy a
bunch of files. The only thing I can see happening is that either the controller card
isnt shutdown properly, or its not initialized properly.

To get it to work, I have to go into the 3ware config during startup, get it to start
rebuilding the array, and move things after the array has been built. Otherwise, it
crashes. Does anyone have suggestions how I can go about figuring this out?

Thanks,
Dhaval

> Hi Dhaval,
> Yes, the shutdowns when using 3Ware controllers can take some time,
> particularly when you have been dealing with large files,  doing unclean
> shutdown will indeed put the array in to a degraded state.
> 
> The 3DM web based manager has all the functionality of the CLI and is much
> easier on the eye, to use it point your browser to http://localhost:1080 You
> will also find access to the controller logs and alarms from here, much
> nicer that the CLI.
> 
> Hope this helped.
> Kind Regards,
> 
> Nick Gleeson
> 3Ware Applications Engineer
> Technical Support (Europe)
> Nick@pie.ie
> www.3ware.com
> Phone +353 61 702045
> 
> ----- Original Message -----
> From: Dhaval Patel <dhaval@patel.sh>
> To: <linux-raid@vger.kernel.org>
> Sent: Friday, May 23, 2003 12:00 PM
> Subject: Re: hello
> 
> 
> > Sorry, I should have provided this information in the first email. I am
> using RAID 5 and
> > I downloaded the latest firmware. I think I found the problem though.
> Currently the box
> > is in my bedroom since I am testing it before I put it in its permanent
> location. And
> > since I actually want to get some sleep at night I turn the box off. Well
> I realized
> > that it just so happens that it shuts down the raid card at the very end.
> If you turn it
> > off too quickly the raid card cannot shutdown cleanly and the array is
> degraded. I wasnt
> > checking the array and assuming that everything was fine. There are no
> errors reported
> > in messages or syslog. I ran the CLI from 3ware and saw that the array is
> in fact
> > degraded. I rebuilt it and ran the tests again and everything seems fine.
> Here is the
> > information about the controller from the CLI
> >
> > Driver:   1.02.00.033
> > Model:    7500-4
> > FW:       FE7X 1.05.00.049
> > BIOS:     BE7X 1.08.00.046
> > Monitor:  ME7X 1.01.00.035
> > PCB:      Rev3
> > PCHIP:    V1.30
> > ACHIP:    V3.20
> >
> > I am actually running Slackware so I downloaded the driver for suse or
> redhat kernel I
> > dont remember which, and compiled it with the vanilla kernel that I
> download when I
> > install any box.
> >
> > I did install the 3dm and launched it with 3dmd. But I cannot get to the
> web interface.
> > How can I do that. Does it offer the same features that the CLI offers?
> >
> > Thanks,
> > Dhaval
> >
> > Nick <Nick@pie.ie> said:
> >
> > > Hi Dhaval,
> > > Did you download the source code for the driver and build it your self?
> What
> > > RAID level are you using?
> > > and what revision of firmware did you download. One common problem that
> > > causes this type of failure is a loose connection to one of your drives,
> > > either the parallel cable or the power cable, if can recheck these first
> it
> > > might help.
> > > Are you using 3DM, the web based management tool for 3Ware controllers,
> this
> > > will give you very detailed information on what is happening with your
> > > array.
> > >
> > > Kind Regards,
> > >
> > > Nick Gleeson
> > > 3Ware Applications Engineer
> > > Technical Support (Europe)
> > > Nick@pie.ie
> > > www.3ware.com
> > > Phone +353 61 702045
> > >
> > > ----- Original Message -----
> > > From: Dhaval Patel <dhaval@patel.sh>
> > > To: <linux-raid@vger.kernel.org>
> > > Sent: Thursday, May 22, 2003 6:26 PM
> > > Subject: hello
> > >
> > >
> > > > Hi, everyone. I am new to this list. Currently I am trying to get IDE
> raid
> > > working with
> > > > the 3ware 7500-4 controller, using Western Digital 120GB drives. I am
> > > using Slackware
> > > > with 2.4.20 kernel. I have the OS installed and am using the latest
> driver
> > > (1.02.00.033)
> > > > that you can download from 3ware's website. I also applied the latest
> > > firmware that came
> > > > along with the driver. The bootup is fine, its just that when I try to
> > > move huge files
> > > > that the box freezes. Yesterday I was copying 50 550+MB files from one
> > > directory to
> > > > another and everything went well. This morning I am copying the same
> files
> > > to another
> > > > directory and it froze on the second file. After it freezes I can
> > > sometimes ping it and
> > > > sometimes I cannot. I havent seen anything in /var/log/messages. After
> a
> > > restart
> > > > everything seems fine.
> > > >
> > > > Thanks in advanced for your help,
> > > > Dhaval
> > > > -
> > > > To unsubscribe from this list: send the line "unsubscribe linux-raid"
> in
> > > > the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > >
> > >
> >
> >
> >
> > --
> >
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 



-- 

Hello

[blh0001]

Greetings,

I am Benedicta Lindiwe Hendricks (Mrs) of RSA. I am writing
this letter  to you with the hope that you will be kind enough to assist
my family.

If this means of communication is not acceptable to you
please accept my apologies as it is the only available and
resourceful means for me right now.

 My children and I are in need of your assistance and we incerely  pray
and hope that you will

be able to attend to our request.  If there is the possibility that you
will be able to help us

do kindly let me know by return mail so that I can tell you about our
humble request.

Thank for your understanding.

Benedicta Lindiwe Hendricks (Mrs).

Alternative email address hen0001@katamail.com


----------------------------------------------------------------------------------
Plaats je zoekertjes GRATIS op AdValvas
Placez votre petite annonce GRATUITEMENT sur AdValvas
http://www.advalvas.be

hello

[lovelyn]

hello my dear,
hope the sun rise get's you well and you are enjoying the weather, mine
weather is cold and cloudy today, it was very great when i get your profile at www.mail-archive.com and i felt a great spark in my heart despite that i have not seen you in perso but your profile really give me a nice pleasure to communicate with you and see how the sun will shine's like. you can reach me via for easiest  communication and never mind as you could not view my pics here but i
will send them immidiately i hear from you via email    lovelynkoneh@rocketmail.com
have a nice day with love & hugssssss
yours sincerely
Lovelyn

Hello

[aaa bbb]

Hello
How are you today? I hope you are fine.If so thank be to God almighty.My name is Miss Ojita,26 years, single girl looking for honest and nice person. whom i can partner with. i have the sum of $7,000,000.00(Seven Million US Dollars) which i intend to use for business purpose.I would like to know you more,most especially what you like and what you dislike, I don't care about your colour or ethnicity, I'm sending you this beautiful mail, with a wish for much happiness.I am looking forward to hear from you,
Love from,
Ojita

Hello

[Mr.Pt. Lee]

Hello 
   
It is understandable that you might be a bit apprehensive because you do not know, but I have a lucrative business proposal of mutual interest to share with you. I got your reference in my search for someone who suits my proposed business relationship. 
    
I am Mr P. Lee of South Korea, happily married with children, and I am Director of Hang Seng Bank Ltd., in charge of the International Remittance Department. I have a confidential business proposal for you. I need you to assist me in implementing a business project from Hong Kong to your country. It is the transfer of large sums of money. Everything about this transaction shall be legally done without hitch. Please try to observe utmost discretion in all matters concerning this issue. 
   
After funds have been successfully transferred into your account, we will share in proportion to both of us agreed. I prefer you to me on my private e-mail address (petercleejp@yahoo.cn) and then after that I will give you more information about this operation. If you're interested, send me the following urgently: 

1st Names and surnames 
2nd Occupation 
3rd Private phone number 
4th Current contact address 
   
Please, if you do not want to delete this e-mail and do not hunt, because I am putting my career and life of my family at stake with this venture. Although nothing ventured nothing gained. 
   
Your earliest response to this letter will be appreciated. 
    
Sincerely, 
   
Mr.Pt. Lee 
Hang Seng Bank Limited 
Hong Kong. () Asian 
E-mail: - petercleejp@yahoo.cn

Hello

[KO CHIM]

I need your services in a confidential matter regarding money. Please Send me an e-mail as soon as
you receive this letter for further discussion and more clarification. 
My personal email is :  kochim265@yahoo.com.hk
Regards,
Ko Chim

HELLO

[Favour love]

hello dear,
How are you? I hope you are fine, my name is miss Favour, I saw your profile today when i was browsing looking for a new friend, that is why i write this mail to you, I will like to know more about you if you don't mind, reply me soon so that i will send you my picture and we be good friends,
Accept my regards,
Hope to hear from you soon,
Favour

Hello

[lisa hedstrand]

My name is Miss Lisa Please accept my apology if my mode of contacting you will in any way offend you. I am compelled to contact you via this medium because i needed a friend from that part of the world. We will get to know each other in details if my proposition accepted. l am a student in UK but originally from USA.

Hello

[laurarey111]

Hello xxxxx,
 How are you doing over there? My name is Laura, Please let
me know if i got the right address so we can open
communication, here is my email address I am waiting for
your confirmation with care Laura...

Hello

[LEUNG CHEUNG]

I need your assistance to transfer $22,500,000.00 Dollars from Hong Kong

Hello

[Yung Kyu Kim]

Hello,

The Project is about the exportation of 100,000 barrels of Light Crude
Oil daily out from Iraq to Turkey through my client's company in Iraq
at the rate of $92.00 a barrel. This amount to $9,200,000 daily. I ask
for your support as a foreigner to handle this business project with my
client and you are not expected to invest in Iraq

If yes, let me know and we will discuss this project proper.

Yung Kyu Kim.
Email: 2794615276@qq.com

Hello

[Noemi Alvarez]

I want to keep up with you with hope for friendship if you are interested.
If you don't mind i will like you to write me back. I am waiting to read
from you, because i have something important and urgent to discuss with
you. I will also send some of my beautiful photos to you.

Hello

['LEUNG CHEUNG']

I need your assistance to transfer $22,500,000.00 Dollars from Hong Kong 
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in

Hello

[program12]

Hi,
I am Kristi and i saw your contact through google page of your country which impress me and i feel we can be friends to share ideals and reason together for good,if not bad then let us know more about each other and i hope there will be no problem for us to be friend with no bad intention.You can also reply me through email(cplkristibakar@outlook.com) so that i can share details about myself, i will be waiting to hear from you soon. 

HELLO

[Favor Desmond]

Hello Dear
Greetings to you,I am Favor Desmond from Ivory coast currently living
in  Togo Republic,I would like to know you more, so that i can tell
you little amount myself and my photo, email address is
favordens@email.com
Thanks
Favor

Hello

[Peter Wong]

Can we talk now?

Hello

[Peter Wong]

Can we talk now?

Hello.

[YAVUZ BEKTER]

I am the foreign operations director of Bank of Turkey.
My name is Mr, Yavuz. I have a sensitive investment project to discuss
with you, please reply now.
________________________
Ik ben de directeur buitenlandse activiteiten van de Bank of Turkey.
Mijn naam is meneer Yavuz. Ik moet een gevoelig investeringsproject bespreken
met u, antwoord dan nu.