linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.com>
To: Shaohua Li <shli@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>, linux-raid@vger.kernel.org
Subject: [md PATCH 6/5] md/raid5: remove over-loading of ->bi_phys_segments.
Date: Mon, 21 Nov 2016 13:32:06 +1100	[thread overview]
Message-ID: <87oa19ef6h.fsf@notabene.neil.brown.name> (raw)
In-Reply-To: <147969099621.5434.12384452255155063186.stgit@noble>

[-- Attachment #1: Type: text/plain, Size: 5786 bytes --]


When a read request, which bypassed the cache, fails, we need to retry
it through the cache.
This involves attaching it to a sequence of stripe_heads, and it may not
be possible to get all the stripe_heads we need at once.
We we do what we can, and record how far we got in ->bi_phys_segments so
we can pick up again later.

There is only every one bio which may have a non-zero offset stored in
->bi_phys_segments, the one that is either active in the single thread
which calls retry_aligned_read(), or is in conf->retry_read_aligned
waiting for retry_aligned_read() to be called again.

So we only need to store one offset value.  This can be in a local
variable passed between remove_bio_from_retry() and
retry_aligned_read(), or in the r5conf structure next to the
->retry_read_aligned pointer.

Storing it there allow the last usage of ->bi_phys_segments to be
removed from md/raid5.c.

Signed-off-by: NeilBrown <neilb@suse.com>
---

This applies on top of the previous set of 5, and finishes the
task for eradicating usage of bi_phys_segments.

NeilBrown


 drivers/md/raid5.c | 46 ++++++++++++----------------------------------
 drivers/md/raid5.h |  1 +
 2 files changed, 13 insertions(+), 34 deletions(-)

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 7169420bfde5..b7be5a097ead 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -144,28 +144,6 @@ static inline struct bio *r5_next_bio(struct bio *bio, sector_t sector)
 		return NULL;
 }
 
-/*
- * We maintain a biased count of active stripes in the bottom 16 bits of
- * bi_phys_segments, and a count of processed stripes in the upper 16 bits
- */
-static inline int raid5_bi_processed_stripes(struct bio *bio)
-{
-	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
-	return (atomic_read(segments) >> 16) & 0xffff;
-}
-
-static inline void raid5_set_bi_processed_stripes(struct bio *bio,
-	unsigned int cnt)
-{
-	atomic_t *segments = (atomic_t *)&bio->bi_phys_segments;
-	int old, new;
-
-	do {
-		old = atomic_read(segments);
-		new = (old & 0xffff) | (cnt << 16);
-	} while (atomic_cmpxchg(segments, old, new) != old);
-}
-
 /* Find first data disk in a raid6 stripe */
 static inline int raid6_d0(struct stripe_head *sh)
 {
@@ -4679,12 +4657,14 @@ static void add_bio_to_retry(struct bio *bi,struct r5conf *conf)
 	md_wakeup_thread(conf->mddev->thread);
 }
 
-static struct bio *remove_bio_from_retry(struct r5conf *conf)
+static struct bio *remove_bio_from_retry(struct r5conf *conf,
+					 unsigned int *offset)
 {
 	struct bio *bi;
 
 	bi = conf->retry_read_aligned;
 	if (bi) {
+		*offset = conf->retry_read_offset;
 		conf->retry_read_aligned = NULL;
 		return bi;
 	}
@@ -4692,11 +4672,7 @@ static struct bio *remove_bio_from_retry(struct r5conf *conf)
 	if(bi) {
 		conf->retry_read_aligned_list = bi->bi_next;
 		bi->bi_next = NULL;
-		/*
-		 * this sets the active strip count to 1 and the processed
-		 * strip count to zero (upper 8 bits)
-		 */
-		raid5_set_bi_processed_stripes(bi, 0);
+		*offset = 0;
 	}
 
 	return bi;
@@ -5620,7 +5596,8 @@ static inline sector_t raid5_sync_request(struct mddev *mddev, sector_t sector_n
 	return STRIPE_SECTORS;
 }
 
-static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
+static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio,
+			       unsigned int offset)
 {
 	/* We may not be able to submit a whole bio at once as there
 	 * may not be enough stripe_heads available.
@@ -5649,7 +5626,7 @@ static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
 		     sector += STRIPE_SECTORS,
 		     scnt++) {
 
-		if (scnt < raid5_bi_processed_stripes(raid_bio))
+		if (scnt < offset)
 			/* already done this stripe */
 			continue;
 
@@ -5657,15 +5634,15 @@ static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
 
 		if (!sh) {
 			/* failed to get a stripe - must wait */
-			raid5_set_bi_processed_stripes(raid_bio, scnt);
 			conf->retry_read_aligned = raid_bio;
+			conf->retry_read_offset = scnt;
 			return handled;
 		}
 
 		if (!add_stripe_bio(sh, raid_bio, dd_idx, 0, 0)) {
 			raid5_release_stripe(sh);
-			raid5_set_bi_processed_stripes(raid_bio, scnt);
 			conf->retry_read_aligned = raid_bio;
+			conf->retry_read_offset = scnt;
 			return handled;
 		}
 
@@ -5788,6 +5765,7 @@ static void raid5d(struct md_thread *thread)
 	while (1) {
 		struct bio *bio;
 		int batch_size, released;
+		unsigned int offset;
 
 		released = release_stripe_list(conf, conf->temp_inactive_list);
 		if (released)
@@ -5805,10 +5783,10 @@ static void raid5d(struct md_thread *thread)
 		}
 		raid5_activate_delayed(conf);
 
-		while ((bio = remove_bio_from_retry(conf))) {
+		while ((bio = remove_bio_from_retry(conf, &offset))) {
 			int ok;
 			spin_unlock_irq(&conf->device_lock);
-			ok = retry_aligned_read(conf, bio);
+			ok = retry_aligned_read(conf, bio, offset);
 			spin_lock_irq(&conf->device_lock);
 			if (!ok)
 				break;
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index 799f84b26838..ec2be7677bfb 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -472,6 +472,7 @@ struct r5conf {
 	struct list_head	delayed_list; /* stripes that have plugged requests */
 	struct list_head	bitmap_list; /* stripes delaying awaiting bitmap update */
 	struct bio		*retry_read_aligned; /* currently retrying aligned bios   */
+	unsigned int		retry_read_offset; /* sector offset into retry_read_aligned */
 	struct bio		*retry_read_aligned_list; /* aligned bios retry list  */
 	atomic_t		preread_active_stripes; /* stripes with scheduled io */
 	atomic_t		active_aligned_reads;
-- 
2.10.2


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 800 bytes --]

  parent reply	other threads:[~2016-11-21  2:32 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-21  1:19 [md PATCH 0/5] Stop using bi_phys_segments as a counter NeilBrown
2016-11-21  1:19 ` [md PATCH 2/5] md/raid5: use md_write_start to count stripes, not bios NeilBrown
2016-11-21  1:19 ` [md PATCH 1/5] md: optimize md_write_start() slightly NeilBrown
2016-11-21  1:19 ` [md PATCH 3/5] md/raid5: simplfy delaying of writes while metadata is updated NeilBrown
2016-11-21  1:19 ` [md PATCH 4/5] md/raid5: call bio_endio() directly rather than queuing for later NeilBrown
2016-11-21  1:19 ` [md PATCH 5/5] md/raid5: use bio_inc_remaining() instead of repurposing bi_phys_segments as a counter NeilBrown
2016-11-21  2:32 ` NeilBrown [this message]
2016-11-21 14:01 ` [md PATCH 0/5] Stop using " Christoph Hellwig
2016-11-21 23:43 ` Shaohua Li
2016-11-22  0:25   ` NeilBrown
2016-11-22  1:02     ` Shaohua Li
2016-11-22  2:19       ` NeilBrown
2016-11-22  8:01         ` Shaohua Li
2016-11-23  2:08           ` NeilBrown
2016-11-23  8:45             ` Christoph Hellwig
2016-11-24  0:31               ` NeilBrown
2017-02-06  8:56 ` Christoph Hellwig
2017-02-06 21:41   ` Shaohua Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87oa19ef6h.fsf@notabene.neil.brown.name \
    --to=neilb@suse.com \
    --cc=hch@lst.de \
    --cc=linux-raid@vger.kernel.org \
    --cc=shli@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).