From: Shaohua Li <shli@kernel.org>
To: linux-raid@vger.kernel.org
Cc: Shaohua Li <shli@fb.com>, Ming Lei <tom.leiming@gmail.com>,
"4.12+" <stable@vger.kernel.org>
Subject: [PATCH] md/raid1: fix writebehind bio clone
Date: Tue, 18 Jul 2017 10:21:56 -0700 [thread overview]
Message-ID: <90e5fed8cd2b5dff7b393de121460671ebdd1260.1500398441.git.shli@fb.com> (raw)
From: Shaohua Li <shli@fb.com>
After bio is submitted, we should not clone it as its bi_iter might be
invalid by driver. This is the case of behind_master_bio. In certain
situration, we could dispatch behind_master_bio immediately for the
first disk and then clone it for other disks.
https://bugzilla.kernel.org/show_bug.cgi?id=196383
Reported-by: Markus <m4rkusxxl@web.de>
Cc: Ming Lei <tom.leiming@gmail.com>
Fix: 841c1316c7da(md: raid1: improve write behind)
Cc: stable@vger.kernel.org (4.12+)
Signed-off-by: Shaohua Li <shli@fb.com>
---
drivers/md/raid1.c | 30 ++++++++++--------------------
1 file changed, 10 insertions(+), 20 deletions(-)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 8387eb1540cd..5622f521830b 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -484,10 +484,6 @@ static void raid1_end_write_request(struct bio *bio)
}
if (behind) {
- /* we release behind master bio when all write are done */
- if (r1_bio->behind_master_bio == bio)
- to_put = NULL;
-
if (test_bit(WriteMostly, &rdev->flags))
atomic_dec(&r1_bio->behind_remaining);
@@ -1080,7 +1076,7 @@ static void unfreeze_array(struct r1conf *conf)
wake_up(&conf->wait_barrier);
}
-static struct bio *alloc_behind_master_bio(struct r1bio *r1_bio,
+static void alloc_behind_master_bio(struct r1bio *r1_bio,
struct bio *bio)
{
int size = bio->bi_iter.bi_size;
@@ -1090,7 +1086,7 @@ static struct bio *alloc_behind_master_bio(struct r1bio *r1_bio,
behind_bio = bio_alloc_mddev(GFP_NOIO, vcnt, r1_bio->mddev);
if (!behind_bio)
- goto fail;
+ return;
/* discard op, we don't support writezero/writesame yet */
if (!bio_has_data(bio))
@@ -1115,14 +1111,13 @@ static struct bio *alloc_behind_master_bio(struct r1bio *r1_bio,
r1_bio->behind_master_bio = behind_bio;;
set_bit(R1BIO_BehindIO, &r1_bio->state);
- return behind_bio;
+ return;
free_pages:
pr_debug("%dB behind alloc failed, doing sync I/O\n",
bio->bi_iter.bi_size);
bio_free_pages(behind_bio);
-fail:
- return behind_bio;
+ bio_put(behind_bio);
}
struct raid1_plug_cb {
@@ -1475,7 +1470,7 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
(atomic_read(&bitmap->behind_writes)
< mddev->bitmap_info.max_write_behind) &&
!waitqueue_active(&bitmap->behind_wait)) {
- mbio = alloc_behind_master_bio(r1_bio, bio);
+ alloc_behind_master_bio(r1_bio, bio);
}
bitmap_startwrite(bitmap, r1_bio->sector,
@@ -1485,14 +1480,11 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio,
first_clone = 0;
}
- if (!mbio) {
- if (r1_bio->behind_master_bio)
- mbio = bio_clone_fast(r1_bio->behind_master_bio,
- GFP_NOIO,
- mddev->bio_set);
- else
- mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
- }
+ if (r1_bio->behind_master_bio)
+ mbio = bio_clone_fast(r1_bio->behind_master_bio,
+ GFP_NOIO, mddev->bio_set);
+ else
+ mbio = bio_clone_fast(bio, GFP_NOIO, mddev->bio_set);
if (r1_bio->behind_master_bio) {
if (test_bit(WriteMostly, &conf->mirrors[i].rdev->flags))
@@ -2346,8 +2338,6 @@ static int narrow_write_error(struct r1bio *r1_bio, int i)
wbio = bio_clone_fast(r1_bio->behind_master_bio,
GFP_NOIO,
mddev->bio_set);
- /* We really need a _all clone */
- wbio->bi_iter = (struct bvec_iter){ 0 };
} else {
wbio = bio_clone_fast(r1_bio->master_bio, GFP_NOIO,
mddev->bio_set);
--
2.11.0
next reply other threads:[~2017-07-18 17:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 17:21 Shaohua Li [this message]
2017-07-18 22:51 ` [PATCH] md/raid1: fix writebehind bio clone Ming Lei
2017-07-18 23:04 ` Shaohua Li
2017-07-19 2:13 ` Ming Lei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=90e5fed8cd2b5dff7b393de121460671ebdd1260.1500398441.git.shli@fb.com \
--to=shli@kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=shli@fb.com \
--cc=stable@vger.kernel.org \
--cc=tom.leiming@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox