From mboxrd@z Thu Jan 1 00:00:00 1970 From: jahammonds prost Subject: Re: trouble creating array Date: Mon, 26 Feb 2007 06:16:22 -0800 (PST) Message-ID: <951660.37205.qm@web55812.mail.re3.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: Sender: linux-raid-owner@vger.kernel.org To: Neil Brown Cc: Justin Piszcz , linux-raid@vger.kernel.org List-Id: linux-raid.ids Rebooted and checked that there were no arrays defined. I have 2 cards in the server - one is a VIA based card, with a single Maxtor, the other this a Promise based card, with 2 Maxtors by Seagate on it. I've been into the config utilites on both cards, and none of them have arrays defined on them. ----- Original Message ---- From: Neil Brown To: jahammonds prost Cc: Justin Piszcz ; linux-raid@vger.kernel.org Sent: Sunday, 25 February, 2007 11:40:26 PM Subject: Re: trouble creating array On Sunday February 25, gmitch64@yahoo.com wrote: > > > Any ideas how to find out what has it open? I can happily write all over the disk with dd... I can create and delete the partition, and it's all good... I will try deleting the sd{b,c}1 partitions, reboot, and see what happens. > ls -l /sys/block/*/holders/* ?? NeilBrown ___________________________________________________________ The all-new Yahoo! Mail goes wherever you go - free your email address from your Internet provider. http://uk.docs.yahoo.com/nowyoucan.html