From mboxrd@z Thu Jan 1 00:00:00 1970 From: Iain Rauch Subject: Re: RAID 6 grow problem Date: Sat, 02 Jun 2007 23:35:34 +0100 Message-ID: References: <18017.59934.688277.311357@notabene.brown> Mime-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <18017.59934.688277.311357@notabene.brown> Sender: linux-raid-owner@vger.kernel.org To: Neil Brown Cc: "linux-raid@vger.kernel.org" , Justin Piszcz List-Id: linux-raid.ids >>> raid6 reshape wasn't added until 2.6.21. Before that only raid5 was >>> supported. >>> You also need to ensure that CONFIG_MD_RAID5_RESHAPE=y. >> >> I don't see that in the config. Should I add it? Then reboot? > > You reported that you were running a 2.6.20 kernel, which doesn't > support raid6 reshape. > You need to compile a 2.6.21 kernel (or > apt-get install linux-image-2.6.21-1-amd64 > or whatever) and ensure that CONFIG_MD_RAID5_RESHAPE=y is in the > .config before compiling. There only seems to be version 2.6.20 does this matter a lot? Also how do I specify what is in the config when using apt-get install? >> I used apt-get install mdadm to first install it, which gave me 2.5.x then I >> downloaded the new source and typed make then make install. Now mdadm -V >> shows "mdadm - v2.6.2 - 21st May 2007". >> Is there anyway to check it is installed correctly? > > The "mdadm -V" check is sufficient. Are you sure because at first I just did the make/make install and mdadm -V did tell me v2.6.2 but I don't believe it was installed properly because it didn't recognise my array nor did it make a config file, and cat /proc/mdstat said no file/directory?? Iain