From: Curt <lightspd@gmail.com>
To: Phil Turmel <philip@turmel.org>
Cc: linux-raid@vger.kernel.org
Subject: Re: hung grow
Date: Fri, 6 Oct 2017 10:07:17 -0400 [thread overview]
Message-ID: <CADg2FGZatpLPHbuJUEuitbipfX77T1XXduEpLTQjPzq2e56fgg@mail.gmail.com> (raw)
In-Reply-To: <7e23d39b-aebb-0852-c98f-758bd99d3eb9@turmel.org>
On Fri, Oct 6, 2017 at 9:13 AM, Phil Turmel <philip@turmel.org> wrote:
> Hi Curt,
>
> Sorry about the delay /-:
>
> { Convention on kernel.org lists is reply to all, bottom replies (or
> interleaved, and trim unnecessary quoted material. Please help those
> of us who follow many threads. }
>
> On 10/05/2017 07:40 PM, Curt wrote:
>> Hey Phil,
>>
>> I got the drive mentioned ddrescued, I wanted to make sure you didn't see
>> anything odd from my pastes before I try the revert.
>
> Only one:
>
>> # smartctl -iA -l scterc /dev/sde
>> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age
>> Always - 2
>> 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
>> Offline - 2
>
> You'll have to ddrescue /dev/sde1 as well. Do that before proceeding.
>
> Phil
Hi Phil,
No worries, I appreciate the help.
(Noted and I will try to follow that standard in all future communication)
Ok, I will ddrescue that drive today, which should take about 10
hours. I'm just doing a ddrescue -f -n /dev/bad /dev/new logFile. Is
there any other suggested flags?
Once that is done, I'll run the before mentioned, mdadm assemble force
revert sda/c/d/g + rescued e and z. Then start pulling whatever data
I can off it.
Cheers,
Curt
next prev parent reply other threads:[~2017-10-06 14:07 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-04 17:18 hung grow Curt
2017-10-04 17:51 ` Anthony Youngman
2017-10-04 18:16 ` Curt
2017-10-04 18:29 ` Joe Landman
2017-10-04 18:37 ` Curt
2017-10-04 18:44 ` Joe Landman
2017-10-04 19:01 ` Anthony Youngman
2017-10-04 19:09 ` Curt
2017-10-04 19:46 ` Anthony Youngman
2017-10-04 20:01 ` Curt
2017-10-04 21:08 ` Anthony Youngman
2017-10-04 21:53 ` Phil Turmel
[not found] ` <CADg2FGbnMzLBqWthKY5Uo__ANC2kAqH_8B1G23nhW+7hWJ=KeA@mail.gmail.com>
2017-10-06 1:25 ` Curt
2017-10-06 11:16 ` Wols Lists
[not found] ` <CADg2FGYc-sPjwukuhonoUUCr3ze3PQWv8gtZPnUT=E4CvsQftg@mail.gmail.com>
2017-10-06 13:13 ` Phil Turmel
2017-10-06 14:07 ` Curt [this message]
2017-10-06 14:27 ` Joe Landman
2017-10-06 14:27 ` Phil Turmel
2017-10-07 3:09 ` Curt
2017-10-07 3:15 ` Curt
2017-10-07 20:45 ` Curt
2017-10-07 21:29 ` Phil Turmel
2017-10-08 22:40 ` Curt
2017-10-09 1:23 ` NeilBrown
2017-10-09 1:40 ` Curt
2017-10-09 4:28 ` NeilBrown
2017-10-09 4:59 ` Curt
2017-10-09 5:47 ` NeilBrown
2017-10-09 12:41 ` Curt
2017-10-10 12:08 ` Curt
2017-10-10 13:06 ` Phil Turmel
2017-10-10 13:37 ` Anthony Youngman
2017-10-10 14:00 ` Phil Turmel
2017-10-10 14:11 ` Curt
2017-10-10 14:14 ` Reindl Harald
2017-10-10 14:15 ` Phil Turmel
2017-10-10 14:23 ` Curt
2017-10-10 18:06 ` Phil Turmel
2017-10-10 19:25 ` Curt
2017-10-10 19:42 ` Phil Turmel
2017-10-10 19:49 ` Curt
2017-10-10 19:51 ` Curt
2017-10-10 20:18 ` Phil Turmel
2017-10-10 20:29 ` Curt
2017-10-10 20:31 ` Phil Turmel
2017-10-10 20:48 ` Curt
2017-10-10 20:47 ` NeilBrown
2017-10-10 20:58 ` Curt
2017-10-10 21:23 ` Curt
2017-10-10 21:56 ` NeilBrown
2017-10-11 0:26 ` Curt
2017-10-11 4:46 ` NeilBrown
2017-10-11 2:20 ` Curt
2017-10-11 4:49 ` NeilBrown
2017-10-11 15:38 ` Curt
2017-10-12 6:15 ` NeilBrown
2017-10-10 14:12 ` Anthony Youngman
2017-10-04 19:06 ` Anthony Youngman
2017-10-04 18:57 ` Anthony Youngman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CADg2FGZatpLPHbuJUEuitbipfX77T1XXduEpLTQjPzq2e56fgg@mail.gmail.com \
--to=lightspd@gmail.com \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).