From: Thomas MARCHESSEAU <marchesseau@gmail.com>
To: linux-raid@vger.kernel.org
Cc: Roger Heflin <rogerheflin@gmail.com>, Phil Turmel <philip@turmel.org>
Subject: Re: RAID 5 "magicaly" become a RAID0
Date: Mon, 13 Apr 2015 10:55:27 +0200 [thread overview]
Message-ID: <D15148A7.3B83B%marchesseau@gmail.com> (raw)
In-Reply-To: <552B0B58.8050102@turmel.org>
Hi all,
Thanks a lot for your time. I appreciate .
Immediate Feedback (with jet lag :) -
Roger,
I’ve already forced the —- assemble, just forget to write it , no more
mdadm --assemble --force /dev/md127 /dev/sdb /dev/sdc /dev/sdd /dev/sde
/dev/sdf /dev/sdg /dev/sdh
mdadm: /dev/md127 assembled from 5 drives - not enough to start the array.
I’ll move to raid6 , that was my 1st choice, but i didn’t build it
Phil,
Md0 .. I got the point, I will use it again to avoid mistakes
==============
OUTPUT of : or x in /dev/sd[b-h] ; do mdadm -E $x ; smartctl -iA -l scterc
$x ; done > report.txt
/dev/sdb:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : 3c496797:3cf85a2f:295fbd9b:2e077213
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:10:59 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 15dbf80e - correct
Events : 21958
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 5
Array State : AAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1091161
LU WWN Device Id: 5 0014ee 25ee4fcd6
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Mon Apr 13 10:03:15 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)
--------------------------------------------------------------
/dev/sdc:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : 8df5ff53:7e7b70cd:8f4f00f1:62d06766
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:10:59 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 18c2e134 - correct
Events : 21958
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : AAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1097832
LU WWN Device Id: 5 0014ee 2b4399815
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 13 10:03:15 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)
--------------------------------------------------------------
/dev/sdd:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : ce00382c:1af27788:009df454:44e23f65
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:10:59 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : ecec264 - correct
Events : 21958
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1097658
LU WWN Device Id: 5 0014ee 2098fea8e
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 13 10:03:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)
--------------------------------------------------------------
/dev/sde:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : c31958a3:769ae8c1:c610013a:8ac4ced9
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:10:59 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 18fad9c3 - correct
Events : 21958
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : AAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1111248
LU WWN Device Id: 5 0014ee 2b43abede
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 13 10:03:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 174 169 021 Pre-fail Always
- 6266
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 45
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always
- 8298
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 43
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 30
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 14
194 Temperature_Celsius 0x0022 101 092 000 Old_age Always
- 49
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
--------------------------------------------------------------
/dev/sdf:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : 486831b4:ce34ac6f:c5f43616:8042099d
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:10:59 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 77082495 - correct
Events : 21958
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 3
Array State : AAAA.A. ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1107956
LU WWN Device Id: 5 0014ee 2b4399801
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 13 10:03:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 178 173 021 Pre-fail Always
- 6058
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 43
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always
- 8297
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 42
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 29
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 13
194 Temperature_Celsius 0x0022 103 094 000 Old_age Always
- 47
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
--------------------------------------------------------------
/dev/sdg:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : fd209577:7efc364a:aae51364:230eefcd
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:09:14 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 93c0611b - correct
Events : 21954
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 4
Array State : AAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1164520
LU WWN Device Id: 5 0014ee 2b4562c3e
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 13 10:03:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 170 165 021 Pre-fail Always
- 6466
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 43
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always
- 8298
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 42
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 29
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 13
194 Temperature_Celsius 0x0022 105 092 000 Old_age Always
- 45
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
--------------------------------------------------------------
/dev/sdh:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : e0890308:1fd11c2e:138b5542:4b5cdc62
Name : Cerebro:0 (local to host Cerebro)
Creation Time : Sat Feb 7 23:02:47 2015
Raid Level : raid5
Raid Devices : 7
Avail Dev Size : 3906767024 (1862.89 GiB 2000.26 GB)
Array Size : 11720300544 (11177.35 GiB 12001.59 GB)
Used Dev Size : 3906766848 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : b1146034:7d8ab0e5:3c975a91:8f786829
Internal Bitmap : 8 sectors from superblock
Update Time : Sun Apr 12 06:09:14 2015
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : 74c4fecf - correct
Events : 21954
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 6
Array State : AAAAAAA ('A' == active, '.' == missing, 'R' == replacing)
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4 (SATA 6Gb/s)
Device Model: WDC WD2000FYYZ-01UL1B1
Serial Number: WD-WCC1P1154279
LU WWN Device Id: 5 0014ee 25f0218e4
Firmware Version: 01.01K02
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 13 10:03:16 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 170 170 021 Pre-fail Always
- 6491
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 18
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always
- 1534
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 18
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 12
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always
- 5
194 Temperature_Celsius 0x0022 106 100 000 Old_age Always
- 44
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
--------------------------------------------------------------
Regards,
Thomas
Le 13/04/15 02:18, « Phil Turmel » <philip@turmel.org> a écrit :
>Hi Thomas,
>
>On 04/12/2015 05:42 PM, Thomas MARCHESSEAU wrote:
>> Hi team ,
>>
>> Like probably lot of new subscriber , i mail you, guys, for help .
>>
>> I¹m running a raid5 on 7 HDD for several month now ( and years on other
>> system) without problem .
>> last week i had a crash disk (sdg) , i¹ve add a new drive (sdi) and
>> rebuild .. Works fine , and i dont think this is the cause of my today
>> problem.
>
>Agreed. Probably not related.
>
>> Yesterday , i¹v upgraded my ubuntu 14.10 , and the system warm me with a
>> message that i can¹t recall and rewrite exactly , but something like :
>> md127 doesn¹t not match with /etc/mdadm/mdadm.conf , blah blah , run
>> /usr/share/mdadm/mkconf , and fix /etc/mdadm/mdadm.conf
>>
>> i¹ve done it , and reboot , all looks good .
>> All the drive have been rename after reboot ( orginal sdg was extract
>>form
>> the bay )
>
>Yes, you cannot trust drives to keep their names through upgrades. The
>names are pseudo-random during boot.
>
>You should know that md127 is the default name chosen by mdadm when
>assembling an array for which it doesn't know any other name. Followed
>by md126, then md125 and so on. You really should give your arrays
>other names. Most commonly starting with md0 or md1.
>
>> I¹ve setup a rsync of my most important data on a external drive this
>> night, who partially failed (only 25% ha been backuped , bad luck ) ,
>> (probably) because this morning i have re-inserted by mistake the
>>faulty
>> drive ( for information , i think the drive was in fact ok , the sata
>> connector was a bit disconnect )
>>
>> I did not pay attention of the situation at the moment , but few hour
>> later , i ssh my filer and my « home » (on the raid partition) was not
>> available anymore .
>
>You should collect your 'dmesg' and post it here. Or cut and paste from
>it anything related to your drives or array.
>
>> I didn¹t try to fschk or any thing else than :
>>
>> Mdadm ‹stop /dev/md127
>> mdadm --assemble /dev/md127 /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf
>> /dev/sdg /dev/sdh
>> mdadm: /dev/md127 assembled from 5 drives - not enough to start the
>>array.
>>
>>
>> So i¹ve read a bunch of usefull link , one of them :) ,
>> https://raid.wiki.kernel.org/index.php/RAID_Recovery , says , don¹t do
>> stupid thing until drop a mail on linux-raid mailling Š so i¹m here .
>>
>> i¹ve collected this usefull info :
>> mdadm --examine /dev/sd[a-z] | egrep 'Event|/dev/sd'
>> /dev/sda: (system HDD )
>> /dev/sdb:
>> Events : 21958
>> /dev/sdc:
>> Events : 21958
>> /dev/sdd:
>> Events : 21958
>> /dev/sde:
>> Events : 21958
>> /dev/sdf:
>> Events : 21958
>> /dev/sdg:
>> Events : 21954 <‹ here
>> /dev/sdh:
>> Events : 21954 <‹ and here
>
>In general, people on this list want to see the full --examine reports.
> As do I.
>
>Also, you need to record which drive serial numbers correspond to which
>device roles, just in case. You can show the smartctl data along with
>the examines like so:
>
>for x in /dev/sd[b-h] ; do mdadm -E $x ; smartctl -iA -l scterc $x ;
>done > report.txt
>
>Then paste report.txt into your next mail.
>
>> The strange thing is that my raid array is now seen as a RAID0 in
>> mdadm --detail /dev/md127
>> /dev/md127:
>> Version :
>> Raid Level : raid0
>> Total Devices : 0
>>
>> State : inactive
>
>It didn't start, so that info isn't meaningful.
>
>> But individually all drive in mdadm ‹examine , are RAID 5 member .
>>
>> Anyone for help ?
>
>Your array should be fixable. The use of "mdadm --assemble --force" as
>recommended by Roger is likely to work. But it won't be enough if you
>don't also figure out why the array stopped after a few hours. That
>sounds like a common problem with raid5 rebuilds.
>
>> i¹ was on the way to perform a
>> mdadm --create --assume-clean ‹level=5 --raid-devices=7
>>--size=11720300544
>> /dev/md127 /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg
>>/dev/sdh
>>
>> Which looks a bit stupid before ask for help
>
>Yes, this is what the wiki means when it refers to doing something
>stupid. Any form of --create is destructive and should only be
>attempted when all other attempts have failed.
>
>Phil
>
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-04-13 8:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-12 21:42 RAID 5 "magicaly" become a RAID0 Thomas MARCHESSEAU
2015-04-12 22:28 ` Roger Heflin
2015-04-13 0:18 ` Phil Turmel
2015-04-13 8:55 ` Thomas MARCHESSEAU [this message]
2015-04-13 10:57 ` Phil Turmel
2015-04-13 12:27 ` Thomas MARCHESSEAU
[not found] ` <D151DEA1.8EEA1%marchesseau@gmail.com>
2015-04-14 12:32 ` Phil Turmel
2015-04-16 8:53 ` Thomas MARCHESSEAU
2015-04-16 12:25 ` Phil Turmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D15148A7.3B83B%marchesseau@gmail.com \
--to=marchesseau@gmail.com \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
--cc=rogerheflin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).