From mboxrd@z Thu Jan 1 00:00:00 1970 From: Colin McDonald Subject: RAID 1 on a server with possible mad mobo Date: Tue, 8 Mar 2005 13:19:45 -0500 Message-ID: Reply-To: Colin McDonald Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-raid-owner@vger.kernel.org To: linux-raid@vger.kernel.org List-Id: linux-raid.ids We have a production server that has apparently crashed and is not getting to the point of booting. It is a Fedora Core 3 install using md with a RAID 1 config with two IDE disks on a Promise Ultra 133 controller. We may have to move it to a completely different box. Without taking up to much of y'alls time, what would be the best solution for moving the RAID array over to a new box? 1. Fresh install on new disk and then pull the data off and startover with a new RAID 1 config. 2. Try to boot off of the disks after they have been transferred into the new machine? I know this will cause all kinds of problems with kernel/devices, etc and probably won't work. Are there any How-To's, Docs that discuss this. I have googled but haven't had any joy. Thanks cm