From: "Jon Nelson" <jnelson-linux-raid@jamponi.net>
To: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Subject: Re: mdadm --stop goes off and never comes back?
Date: Wed, 19 Dec 2007 20:07:21 -0600 [thread overview]
Message-ID: <cccedfc60712191807l1bb09ab3p1168570a5429865b@mail.gmail.com> (raw)
In-Reply-To: <cccedfc60712191805i5828ff32gb1f04247dc9dedc2@mail.gmail.com>
On 12/19/07, Jon Nelson <jnelson-linux-raid@jamponi.net> wrote:
> On 12/19/07, Neil Brown <neilb@suse.de> wrote:
> > On Tuesday December 18, jnelson-linux-raid@jamponi.net wrote:
> > > This just happened to me.
> > > Create raid with:
> > >
> > > mdadm --create /dev/md2 --level=raid10 --raid-devices=3
> > > --spare-devices=0 --layout=o2 /dev/sdb3 /dev/sdc3 /dev/sdd3
> > >
> > > cat /proc/mdstat
> > >
> > > md2 : active raid10 sdd3[2] sdc3[1] sdb3[0]
> > > 5855424 blocks 64K chunks 2 offset-copies [3/3] [UUU]
> > > [==>..................] resync = 14.6% (859968/5855424)
> > > finish=1.3min speed=61426K/sec
> > >
> > > Some log messages:
> > >
> > > Dec 18 15:02:28 turnip kernel: md: md2: raid array is not clean --
> > > starting background reconstruction
> > > Dec 18 15:02:28 turnip kernel: raid10: raid set md2 active with 3 out
> > > of 3 devices
> > > Dec 18 15:02:28 turnip kernel: md: resync of RAID array md2
> > > Dec 18 15:02:28 turnip kernel: md: minimum _guaranteed_ speed: 1000
> > > KB/sec/disk.
> > > Dec 18 15:02:28 turnip kernel: md: using maximum available idle IO
> > > bandwidth (but not more than 200000 KB/sec) for resync.
> > > Dec 18 15:02:28 turnip kernel: md: using 128k window, over a total of
> > > 5855424 blocks.
> > > Dec 18 15:03:36 turnip kernel: md: md2: resync done.
> > > Dec 18 15:03:36 turnip kernel: md: checkpointing resync of md2.
> > >
> > > I tried to stop the array:
> > >
> > > mdadm --stop /dev/md2
> > >
> > > and mdadm never came back. It's off in the kernel somewhere. :-(
> > >
> > > kill, of course, has no effect.
> > > The machine still runs fine, the rest of the raids (md0 and md1) work
> > > fine (same disks).
> > >
> > > The output (snipped, only mdadm) of 'echo t > /proc/sysrq-trigger'
> > >
> > > Dec 18 15:09:13 turnip kernel: mdadm S 0001e5359fa38fb0 0
> > > 3943 1 (NOTLB)
> > > Dec 18 15:09:13 turnip kernel: ffff810033e7ddc8 0000000000000086
> > > 0000000000000000 0000000000000092
> > > Dec 18 15:09:13 turnip kernel: 0000000000000fc7 ffff810033e7dd78
> > > ffffffff80617800 ffffffff80617800
> > > Dec 18 15:09:13 turnip kernel: ffffffff8061d210 ffffffff80617800
> > > ffffffff80617800 0000000000000000
> > > Dec 18 15:09:13 turnip kernel: Call Trace:
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff803fac96>]
> > > __mutex_lock_interruptible_slowpath+0x8b/0xca
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff802acccb>] do_open+0x222/0x2a5
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff8038705d>] md_seq_show+0x127/0x6c1
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff80275597>] vma_merge+0x141/0x1ee
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff802a2aa0>] seq_read+0x1bf/0x28b
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff8028a42d>] vfs_read+0xcb/0x153
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff8028a7c1>] sys_read+0x45/0x6e
> > > Dec 18 15:09:13 turnip kernel: [<ffffffff80209c2e>] system_call+0x7e/0x83
> > >
> > >
> > >
> > > What happened? Is there any debug info I can provide before I reboot?
> >
> > Don't know.... very odd.
> >
> > The rest of the 'sysrq' output would possibly help.
>
> Does this help? It's the same syscall and args, I think, as above.
>
> Dec 18 15:09:13 turnip kernel: hald S 0001e52f4793e397 0
> 3040 1 (NOTLB)
> Dec 18 15:09:13 turnip kernel: ffff81003aa51e38 0000000000000086
> 0000000000000000 ffffffff802
> 68ee6
> Dec 18 15:09:13 turnip kernel: ffff81002a97e5c0 ffff81003aa51de8
> ffffffff80617800 ffffffff806
> 17800
> Dec 18 15:09:13 turnip kernel: ffffffff8061d210 ffffffff80617800
> ffffffff80617800 ffff8100000
> 0bb48
> Dec 18 15:09:13 turnip kernel: Call Trace:
> Dec 18 15:09:13 turnip kernel: [<ffffffff80268ee6>]
> get_page_from_freelist+0x3c4/0x545
> Dec 18 15:09:13 turnip kernel: [<ffffffff803fac96>]
> __mutex_lock_interruptible_slowpath+0x8b/
> 0xca
> Dec 18 15:09:13 turnip kernel: [<ffffffff80387adf>] md_attr_show+0x2f/0x64
> Dec 18 15:09:13 turnip kernel: [<ffffffff802cd142>] sysfs_read_file+0xb3/0x111
> Dec 18 15:09:13 turnip kernel: [<ffffffff8028a42d>] vfs_read+0xcb/0x153
> Dec 18 15:09:13 turnip kernel: [<ffffffff8028a7c1>] sys_read+0x45/0x6e
> Dec 18 15:09:13 turnip kernel: [<ffffffff80209c2e>] system_call+0x7e/0x83
> Dec 18 15:09:13 turnip kernel:
NOTE: kernel is stock openSUSE 10.3 kernel, x86_64, 2.6.22.13-0.3-default.
--
Jon
next prev parent reply other threads:[~2007-12-20 2:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-18 21:11 mdadm --stop goes off and never comes back? Jon Nelson
2007-12-20 1:45 ` Neil Brown
2007-12-20 2:05 ` Jon Nelson
2007-12-20 2:07 ` Jon Nelson [this message]
2007-12-22 11:58 ` Neil Brown
2007-12-22 13:01 ` Jon Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cccedfc60712191807l1bb09ab3p1168570a5429865b@mail.gmail.com \
--to=jnelson-linux-raid@jamponi.net \
--cc=linux-raid@vger.kernel.org \
--cc=neilb@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox