From: Andrew Nelson <freeandy@gmail.com>
To: linux-raid@vger.kernel.org
Subject: Re: will mdadm work with a raid created using raidtools
Date: Thu, 16 Feb 2006 09:15:27 -0600 [thread overview]
Message-ID: <dt24uh$fv8$1@sea.gmane.org> (raw)
In-Reply-To: <17395.45134.227188.527148@cse.unsw.edu.au>
Neil Brown wrote:
> On Wednesday February 15, freeandy@gmail.com wrote:
>
>>I may be a bit late in asking this because I already gave it a try but will
>>mdadm work with a raid created using raidtools?
>
>
> Yes. There is no difference in the arrays created by raidtools or
> mdadm.
>
>
Cool. Now I just gotta figure out why I can't create the raid. Sadly when this
system crashed I lost the old /etc/raidtab config so I really have no idea how
the raid was set up, but here is what I've done so far.
alfalfa:~# mdadm --examine /dev/hdg
/dev/hdg:
Magic : a92b4efc
Version : 00.90.00
UUID : 04407130:1c19b2b9:2c573158:ee8ac467
Creation Time : Sun Dec 21 16:19:13 2003
Raid Level : raid1
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Update Time : Tue Jan 13 23:12:57 2004
State : active
Active Devices : 1
Working Devices : 2
Failed Devices : 0
Spare Devices : 1
Checksum : 6ff770df - correct
Events : 0.29
Number Major Minor RaidDevice State
this 2 34 0 2 spare /dev/hdg
0 0 33 1 0 active sync /dev/hde1
1 1 0 0 1 faulty removed
2 2 34 0 2 spare /dev/hdg
alfalfa:~# mdadm --examin /dev/hde
mdadm: No super block found on /dev/hde (Expected magic a92b4efc, got ffffffff)
alfalfa:~# mdadm --examin /dev/hde1
/dev/hde1:
Magic : a92b4efc
Version : 00.90.00
UUID : 04407130:1c19b2b9:2c573158:ee8ac467
Creation Time : Sun Dec 21 16:19:13 2003
Raid Level : raid1
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Update Time : Tue Feb 14 21:44:46 2006
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Checksum : 73e5445d - correct
Events : 0.42
Number Major Minor RaidDevice State
this 0 33 1 0 active sync /dev/hde1
0 0 33 1 0 active sync /dev/hde1
1 1 34 1 1 active sync /dev/hdg1
alfalfa:~# mdadm --examin /dev/hdg1
/dev/hdg1:
Magic : a92b4efc
Version : 00.90.00
UUID : 04407130:1c19b2b9:2c573158:ee8ac467
Creation Time : Sun Dec 21 16:19:13 2003
Raid Level : raid1
Raid Devices : 2
Total Devices : 2
Preferred Minor : 0
Update Time : Tue Feb 14 21:44:46 2006
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Checksum : 73e54460 - correct
Events : 0.42
Number Major Minor RaidDevice State
this 1 34 1 1 active sync /dev/hdg1
0 0 33 1 0 active sync /dev/hde1
1 1 34 1 1 active sync /dev/hdg1
I then try to assemble the raid with
mdadm --assemble /dev/md0 /dev/hdg1 /dev/hde1
This appears to work fine but then the computer locks up. With this info in syslog.
Feb 14 21:57:19 localhost kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DI
SKS=27
Feb 14 21:57:19 localhost kernel: md: md0 stopped.
Feb 14 21:57:51 localhost kernel: md: md0 stopped.
Feb 14 21:57:52 localhost kernel: md: bind<hdg1>
Feb 14 21:57:52 localhost kernel: md: bind<hde1>
Feb 14 21:57:52 localhost kernel: md: md0: raid array is not clean -- starting b
ackground reconstruction
Feb 14 21:57:52 localhost kernel: md: raid1 personality registered as nr 3
Feb 14 21:57:52 localhost kernel: raid1: raid set md0 active with 2 out of 2 mir
rors
Feb 14 21:57:52 localhost kernel: md: syncing RAID array md0
Feb 14 21:57:52 localhost kernel: md: minimum _guaranteed_ reconstruction speed:
1000 KB/sec/disc.
Feb 14 21:57:52 localhost kernel: md: using maximum available idle IO bandwith (
but not more than 200000 KB/sec) for reconstruction.
Feb 14 21:57:52 localhost kernel: md: using 128k window, over a total of 1953583
36 blocks.
Feb 14 21:58:36 localhost kernel: hde: dma_timer_expiry: dma status == 0x21
Feb 14 21:58:46 localhost kernel: hde: DMA timeout error
Feb 14 21:58:46 localhost kernel: hde: dma timeout error: status=0x51 { DriveRea
dy SeekComplete Error }
Feb 14 21:58:46 localhost kernel: hde: dma timeout error: error=0x40 { Uncorrect
ableError }, LBAsect=1594001, high=0, low=1594001, sector=1593535
Feb 14 21:58:46 localhost kernel: end_request: I/O error, dev hde, sector 159353
5
Does anyone have any idea what I'm doing wrong?
Thanks much
//andy
next prev parent reply other threads:[~2006-02-16 15:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-15 19:07 will mdadm work with a raid created using raidtools Andrew Nelson
2006-02-15 22:50 ` Neil Brown
2006-02-16 15:15 ` Andrew Nelson [this message]
2006-02-16 17:14 ` Frank Blendinger
2006-02-16 17:31 ` Andrew Nelson
2006-02-16 17:47 ` Frank Blendinger
2006-02-16 18:23 ` Andrew Nelson
2006-02-16 19:37 ` Andrew Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='dt24uh$fv8$1@sea.gmane.org' \
--to=freeandy@gmail.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).