linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guoqing Jiang <guoqing.jiang@linux.dev>
To: Yu Kuai <yukuai1@huaweicloud.com>,
	song@kernel.org, pmenzel@molgen.mpg.de
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org,
	yi.zhang@huawei.com, yangerkun@huawei.com,
	"yukuai (C)" <yukuai3@huawei.com>
Subject: Re: [PATCH v2] md/raid5: don't allow concurrent reshape with recovery
Date: Wed, 31 May 2023 09:49:43 +0800	[thread overview]
Message-ID: <e2c936ce-5832-9d69-919a-c98af673bb3a@linux.dev> (raw)
In-Reply-To: <e26af7db-a283-47ca-fc61-89af99f52c17@huaweicloud.com>



On 5/31/23 09:22, Yu Kuai wrote:
> Hi,
>
> 在 2023/05/31 9:06, Guoqing Jiang 写道:
>>
>>
>> On 5/29/23 21:34, Yu Kuai wrote:
>>> From: Yu Kuai <yukuai3@huawei.com>
>>>
>>> Commit 0aecb06e2249 ("md/raid5: don't allow replacement while reshape
>>> is in progress") fixes that replacement can be set if reshape is
>>> interrupted, which will cause that array can't be assembled.

I just pulled md tree, but can't find the commit id either in md-next or 
md-fixes .
gjiang@pc:~/storage/md> git branch
  master
  md-fixes
* md-next
gjiang@pc:~/storage/md> git branch --contain 0aecb06e2249
error: malformed object name 0aecb06e2249

>>> There is a similar problem on the other side, if recovery is
>>> interrupted, then reshape can start, which will cause the same problem.
>>>
>>> Fix the problem by not starting to reshape while recovery is still in
>>> progress.
>>>
>>> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
>>> ---
>>> Changes in v2:
>>>   - fix some typo in commit message.
>>>
>>>   drivers/md/raid5.c | 8 ++++++++
>>>   1 file changed, 8 insertions(+)
>>>
>>> diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
>>> index 8686d629e3f2..6615abf54d3f 100644
>>> --- a/drivers/md/raid5.c
>>> +++ b/drivers/md/raid5.c
>>> @@ -8525,6 +8525,7 @@ static int raid5_start_reshape(struct mddev 
>>> *mddev)
>>>       struct r5conf *conf = mddev->private;
>>>       struct md_rdev *rdev;
>>>       int spares = 0;
>>> +    int i;
>>>       unsigned long flags;
>>>       if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
>>> @@ -8536,6 +8537,13 @@ static int raid5_start_reshape(struct mddev 
>>> *mddev)
>>>       if (has_failed(conf))
>>>           return -EINVAL;
>>> +    /* raid5 can't handle concurrent reshape and recovery */
>>> +    if (mddev->recovery_cp < MaxSector)
>>> +        return -EBUSY;
>>> +    for (i = 0; i < conf->raid_disks; i++)
>>> +        if (rdev_mdlock_deref(mddev, conf->disks[i].replacement))
>>> +            return -EBUSY;
>>> +
>>
>> Does it mean reshape and recovery  can happen in parallel without the 
>> change?
>> I really doubt about it given any kind of internal io (resync, 
>> reshape and recovery)
>> is handled by resync thread. And IIUC either md_do_sync or 
>> md_check_recovery
>> should avoid it, no need to do it in personality layer.
>>
>
> They can't, in this case recovery is interrupted, then recovery can't
> make progress, and md_check_recovery() will start reshape, and after
> reshape is done, recovery will continue, and data will be corrupted
> because raid456 reshape doesn't handle replacement.

So, do reshape first then recovery, right? I don't see concurrent 
reshape and recovery
happen based on your description, if concurrent reshape and recovery is 
possible
then I believe we really have big trouble.

> And by the way in raid456 is that if system reboot, this array can't be
> assembled, raid5_run() will fail if reshape and replacement are both
> set.

Assemble an array need to read data from sb, I don't know which place 
record replacement,
I probably misunderstand something.

Thanks,
Guoqing


  parent reply	other threads:[~2023-05-31  1:49 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-29 13:34 [PATCH v2] md/raid5: don't allow concurrent reshape with recovery Yu Kuai
2023-05-30 21:19 ` Song Liu
2023-05-31  1:06 ` Guoqing Jiang
2023-05-31  1:22   ` Yu Kuai
2023-05-31  1:29     ` Yu Kuai
2023-05-31  1:49     ` Guoqing Jiang [this message]
2023-05-31  3:20       ` Yu Kuai
2023-05-31  7:33         ` Guoqing Jiang
2023-06-05 23:59           ` Song Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e2c936ce-5832-9d69-919a-c98af673bb3a@linux.dev \
    --to=guoqing.jiang@linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=pmenzel@molgen.mpg.de \
    --cc=song@kernel.org \
    --cc=yangerkun@huawei.com \
    --cc=yi.zhang@huawei.com \
    --cc=yukuai1@huaweicloud.com \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).