From: Wu Guanghao <wuguanghao3@huawei.com>
To: "yukuai (C)" <yukuai3@huawei.com>, <song@kernel.org>
Cc: <linux-raid@vger.kernel.org>, <yangyun50@huawei.com>
Subject: [PATCH v2] Factor out code into md_should_do_recovery()
Date: Mon, 8 Sep 2025 16:20:37 +0800 [thread overview]
Message-ID: <e62894c8-d916-94bc-ef48-3c60e6e1fc5d@huawei.com> (raw)
In md_check_recovery(), use new helper to make code cleaner.
v2: split judgment conditions and add comments
Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com>
---
drivers/md/md.c | 59 +++++++++++++++++++++++++++++++++++++++----------
1 file changed, 47 insertions(+), 12 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1baaf52c603c..58ce3518f51b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -9741,6 +9741,52 @@ static void unregister_sync_thread(struct mddev *mddev)
md_reap_sync_thread(mddev);
}
+static bool md_should_do_recovery(struct mddev *mddev)
+{
+ /*
+ * As long as one of the following flags is set,
+ * recovery needs to do or cleanup.
+ */
+ if (test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
+ test_bit(MD_RECOVERY_DONE, &mddev->recovery))
+ return true;
+
+ /*
+ * If no flags are set and it is in read-only status,
+ * there is nothing to do.
+ */
+ if (!md_is_rdwr(mddev))
+ return false;
+
+ /*
+ * MD_SB_CHANGE_PENDING indicates that the array is switching from clean to
+ * active, and no action is needed for now.
+ * All other MD_SB_* flags require to update the superblock.
+ */
+ if (mddev->sb_flags & ~ (1<<MD_SB_CHANGE_PENDING))
+ return true;
+
+ /*
+ * If the array is not using external metadata and there has been no data
+ * written for some time, then the array's status needs to be set to
+ * in_sync.
+ */
+ if (mddev->external == 0 && mddev->safemode == 1)
+ return true;
+
+ /*
+ * When the system is about to restart or the process receives an signal,
+ * the array needs to be synchronized as soon as possible.
+ * Once the data synchronization is completed, need to change the array
+ * status to in_sync.
+ */
+ if (mddev->safemode == 2 && !mddev->in_sync &&
+ mddev->resync_offset == MaxSector)
+ return true;
+
+ return false;
+}
+
/*
* This routine is regularly called by all per-raid-array threads to
* deal with generic issues like resync and super-block update.
@@ -9777,18 +9823,7 @@ void md_check_recovery(struct mddev *mddev)
flush_signals(current);
}
- if (!md_is_rdwr(mddev) &&
- !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_DONE, &mddev->recovery))
- return;
- if ( ! (
- (mddev->sb_flags & ~ (1<<MD_SB_CHANGE_PENDING)) ||
- test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
- test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
- (mddev->external == 0 && mddev->safemode == 1) ||
- (mddev->safemode == 2
- && !mddev->in_sync && mddev->resync_offset == MaxSector)
- ))
+ if (!md_should_do_recovery(mddev))
return;
if (mddev_trylock(mddev)) {
--
2.27.0
next reply other threads:[~2025-09-08 8:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-08 8:20 Wu Guanghao [this message]
2025-09-11 6:23 ` [PATCH v2] Factor out code into md_should_do_recovery() Yu Kuai
2025-09-20 9:53 ` Yu Kuai
2025-09-11 6:45 ` Paul Menzel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e62894c8-d916-94bc-ef48-3c60e6e1fc5d@huawei.com \
--to=wuguanghao3@huawei.com \
--cc=linux-raid@vger.kernel.org \
--cc=song@kernel.org \
--cc=yangyun50@huawei.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox