From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yanggun Subject: Re: raid1 mysteriously switching to read-only Date: Sun, 11 Dec 2005 23:29:23 +0900 Message-ID: References: <20051128102824.14498.patches@notabene> <1051127234104.14937@suse.de> <17306.31969.240202.416327@cse.unsw.edu.au> <17306.35737.880103.939683@cse.unsw.edu.au> <17306.50617.458648.8740@cse.unsw.edu.au> <439C344F.9020408@ucolick.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Return-path: In-Reply-To: <439C344F.9020408@ucolick.org> Content-Disposition: inline Sender: linux-raid-owner@vger.kernel.org To: Patrik Jonsson Cc: Neil Brown , linux-raid@vger.kernel.org List-Id: linux-raid.ids I did not find involved part with this in the document. I am sorry, inform it is what section. 2005/12/11, Patrik Jonsson : > hello, > > Perhaps this can answer some questions: > > http://www.tldp.org/HOWTO/Software-RAID-HOWTO.html > > cheers, > > /Patrik > > Yanggun wrote: > > Thank you very much. > > > > Can you inform it is what difference technologically? > > > > Yanggun > > > > 2005/12/10, Neil Brown : > > > >>On Saturday December 10, yang.geum.seok@gmail.com wrote: > >> > >>>Should I do format after make RAID-1(/dev/md0) device? > >> > >>Yes. format (mkfs) must come AFTER make RAID1 (mdadm -C). > >> > >>>After I format disks(/dev/sda1, /dev/sdb1), do not you compose to > >>>RAID-1? > >> > >>Don't format sda1 or sdb1. Compose the RAID-1 first, and then format > >>md0. > >> > >>NeilBrown > >> > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > !DSPAM:439c3231294002003030161! > > > > >