From mboxrd@z Thu Jan 1 00:00:00 1970 From: Darko Luketic Subject: Re: RAID10 with 2 drives auto-assembled as RAID1 Date: Sat, 5 Nov 2016 22:10:46 +0100 Message-ID: References: <0487f9a4-c04a-8a4d-78ad-0191995d4be9@luketic.de> <57ce55da-fadc-db02-289e-db44bf6fb7d7@turmel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <57ce55da-fadc-db02-289e-db44bf6fb7d7@turmel.org> Sender: linux-raid-owner@vger.kernel.org To: Phil Turmel , linux-raid@vger.kernel.org List-Id: linux-raid.ids Ok Phil, sorry for that. In the meantime I tried to use mdadm with the --build option. mdadm --build --level=10 --raid-devices=2 --chunk=64 /dev/md0 /dev/sde1 /dev/sde2 after about 1% I stopped it and did the same with just /dev/sde and /dev/sdf because I remembered I had used the whole drives previously but that wasn't that case here -> stopped quickly. Both times I used e2fsck /dev/md0 -n without success. I also tried mke2fs -n to find out the superblock copies, without success. The I created a raid10 because the manpage says: "but the content of the device is left otherwise untouched" and waited for about 40% resync, checking md0 with hexdump, then rebooted to install a new system, because pxe booting is a long process and the risk of the old system again auto-assembling the array as RAID1 was there. So now when I boot a new installation the RAID10 is assembled but not resyncing (auto read-only). Regarding syslogs of the last working assembly, those don't exist anymore. The old OS was replaced by a new installation. Last good assembly was approx. Nov 04 2016 ~ 1400 CET. # mdadm -E /dev/sde1 /dev/sde1: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : 7306a1c3:bec6f242:2d17bc6d:17afa5c7 Name : arch:0 Creation Time : Sat Nov 5 17:58:30 2016 Raid Level : raid10 Raid Devices : 2 Avail Dev Size : 3906764943 (1862.89 GiB 2000.26 GB) Array Size : 1953382400 (1862.89 GiB 2000.26 GB) Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=262056 sectors, after=143 sectors State : active Device UUID : 91f5e09a:fb8c5d17:e3f052e4:fec979fc Internal Bitmap : 8 sectors from superblock Update Time : Sat Nov 5 19:21:43 2016 Bad Block Log : 512 entries available at offset 72 sectors Checksum : c546f079 - correct Events : 979 Layout : near=2 Chunk Size : 512K Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing, 'R' == replacing) - # mdadm -E /dev/sdf1 /dev/sdf1: Magic : a92b4efc Version : 1.2 Feature Map : 0x1 Array UUID : 7306a1c3:bec6f242:2d17bc6d:17afa5c7 Name : arch:0 Creation Time : Sat Nov 5 17:58:30 2016 Raid Level : raid10 Raid Devices : 2 Avail Dev Size : 3906764943 (1862.89 GiB 2000.26 GB) Array Size : 1953382400 (1862.89 GiB 2000.26 GB) Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB) Data Offset : 262144 sectors Super Offset : 8 sectors Unused Space : before=262056 sectors, after=143 sectors State : active Device UUID : f0e3d531:98ce389c:1bed4139:5417791d Internal Bitmap : 8 sectors from superblock Update Time : Sat Nov 5 19:21:43 2016 Bad Block Log : 512 entries available at offset 72 sectors Checksum : 57056a03 - correct Events : 979 Layout : near=2 Chunk Size : 512K Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing, 'R' == replacing) - # ./lsdrv PCI [ahci] 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31) ├scsi 0:0:0:0 ATA Samsung SSD 840 {S12RNEAD329899T} │└sda 238.47g [8:0] Partitioned (gpt) │ ├sda1 300.00m [8:1] ntfs 'Wiederherstellung' {C268192968191E2B} │ ├sda2 100.00m [8:2] vfat {3220-6E38} │ ├sda3 128.00m [8:3] Empty/Unknown │ ├sda4 237.52g [8:4] ntfs {5CC02A08C029E8CA} │ └sda5 450.00m [8:5] ntfs {48963645963633B2} ├scsi 1:0:0:0 ATA Samsung SSD 840 {S12PNEAD320071X} │└sdb 119.24g [8:16] Partitioned (gpt) │ ├sdb1 256.00m [8:17] vfat {6B67-1A2D} │ └sdb2 118.99g [8:18] ext4 {eb75a1fd-f602-4312-b9ea-44c53b27faf7} │ └Mounted as /dev/sdb2 @ / ├scsi 2:0:0:0 ATA Samsung SSD 840 {S1D9NSAF642954E} │└sdc 931.51g [8:32] Partitioned (gpt) │ ├sdc1 128.00m [8:33] Empty/Unknown │ └sdc2 931.39g [8:34] ntfs '1TB' {80F86A9DF86A90E8} ├scsi 3:0:0:0 ATA ST4000DM000-1F21 {Z300CW2F} │└sdd 3.64t [8:48] Partitioned (gpt) │ ├sdd1 128.00m [8:49] Empty/Unknown │ └sdd2 3.64t [8:50] ntfs {F2166E73166E38AD} ├scsi 4:0:0:0 ATA TOSHIBA DT01ACA2 {13QH679AS} │└sde 1.82t [8:64] Partitioned (gpt) │ └sde1 1.82t [8:65] MD raid10,near2 (0/2) (w/ sdf1) in_sync 'arch:0' {7306a1c3-bec6-f242-2d17-bc6d17afa5c7} │ └md127 1.82t [9:127] MD v1.2 raid10,near2 (2) read-auto, 512k Chunk {7306a1c3:bec6f242:2d17bc6d:17afa5c7} │ Empty/Unknown └scsi 5:0:0:0 ATA TOSHIBA DT01ACA2 {13QH4MDAS} └sdf 1.82t [8:80] Partitioned (gpt) └sdf1 1.82t [8:81] MD raid10,near2 (1/2) (w/ sde1) in_sync 'arch:0' {7306a1c3-bec6-f242-2d17-bc6d17afa5c7} └md127 1.82t [9:127] MD v1.2 raid10,near2 (2) read-auto, 512k Chunk {7306a1c3:bec6f242:2d17bc6d:17afa5c7} Empty/Unknown PCI [ahci] 03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) ├scsi 6:x:x:x [Empty] └scsi 7:x:x:x [Empty] - # dmesg [ 0.000000] microcode: microcode updated early to revision 0x9e, date = 2016-06-22 [ 0.000000] Linux version 4.8.6-1-ARCH (builduser@tobias) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Mon Oct 31 18:51:30 CET 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb75a1fd-f602-4312-b9ea-44c53b27faf7 rw quiet [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006df83fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006df84000-0x000000006df84fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006df85000-0x000000006dfcefff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006dfcf000-0x000000006e026fff] usable [ 0.000000] BIOS-e820: [mem 0x000000006e027000-0x000000006ed17fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006ed18000-0x000000006ed2dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000006ed2e000-0x000000006ed93fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000006ed94000-0x000000006f9cbfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006f9cc000-0x000000006ff99fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006ff9a000-0x000000006ffccfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006ffcd000-0x000000006fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000700fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000fffffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ESRT=0x6f5c6018 ACPI=0x6ff1e000 ACPI 2.0=0x6ff1e000 SMBIOS=0xf05e0 MPS=0xfc960 [ 0.000000] esrt: Reserving ESRT space from 0x000000006f5c6018 to 0x000000006f5c6050. [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./X170-Extreme ECC, BIOS F1 02/18/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1000000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable [ 0.000000] 1 base 0078000000 mask 7FF8000000 uncachable [ 0.000000] 2 base 0074000000 mask 7FFC000000 uncachable [ 0.000000] 3 base 0072000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 0071000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0070800000 mask 7FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0x70000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcbe0-0x000fcbef] mapped at [ffff8800000fcbe0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x01b4d000, 0x01b4dfff] PGTABLE [ 0.000000] BRK [0x01b4e000, 0x01b4efff] PGTABLE [ 0.000000] BRK [0x01b4f000, 0x01b4ffff] PGTABLE [ 0.000000] BRK [0x01b50000, 0x01b50fff] PGTABLE [ 0.000000] BRK [0x01b51000, 0x01b51fff] PGTABLE [ 0.000000] BRK [0x01b52000, 0x01b52fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3733f000-0x37996fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x000000006FF1E000 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000006FF1E0A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000006FF40CD0 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x000000006FF1E200 022ACC (v02 ALASKA A M I 01072009 INTL 20120913) [ 0.000000] ACPI: FACS 0x000000006FF99F80 000040 [ 0.000000] ACPI: APIC 0x000000006FF40DE0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000006FF40EA0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x000000006FF40EE8 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000006FF40F88 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x000000006FF40FC8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B) [ 0.000000] ACPI: SSDT 0x000000006FF41000 00036D (v01 SataRe SataTabl 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000006FF41370 000490 (v02 Intel PerfTune 00001000 INTL 20120913) [ 0.000000] ACPI: LPIT 0x000000006FF41800 000094 (v01 INTEL SKL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000006FF41898 000248 (v02 INTEL sensrhub 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000006FF41AE0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000006FF44690 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913) [ 0.000000] ACPI: DBGP 0x000000006FF452D8 000034 (v01 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: DBG2 0x000000006FF45310 000054 (v00 INTEL 00000000 MSFT 0000005F) [ 0.000000] ACPI: SSDT 0x000000006FF45368 002103 (v02 INTEL xh_rvp10 00000000 INTL 20120913) [ 0.000000] ACPI: SSDT 0x000000006FF47470 005384 (v02 SaSsdt SaSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: UEFI 0x000000006FF4C7F8 000042 (v01 ALASKA A M I 00000000 00000000) [ 0.000000] ACPI: SSDT 0x000000006FF4C840 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913) [ 0.000000] ACPI: DMAR 0x000000006FF4D698 000070 (v01 INTEL SKL 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! 0x000000006FF4D708 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000fffffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0xfffff9000-0xfffffdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000fffffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000006df83fff] [ 0.000000] node 0: [mem 0x000000006dfcf000-0x000000006e026fff] [ 0.000000] node 0: [mem 0x000000006ed18000-0x000000006ed2dfff] [ 0.000000] node 0: [mem 0x000000006ffcd000-0x000000006fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000fffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000fffffffff] [ 0.000000] On node 0 totalpages: 16179138 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 28 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6977 pages used for memmap [ 0.000000] DMA32 zone: 446501 pages, LIFO batch:31 [ 0.000000] Normal zone: 245760 pages used for memmap [ 0.000000] Normal zone: 15728640 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x6df84000-0x6df84fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6df85000-0x6dfcefff] [ 0.000000] PM: Registered nosave memory: [mem 0x6e027000-0x6ed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6ed2e000-0x6ed93fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6ed94000-0x6f9cbfff] [ 0.000000] PM: Registered nosave memory: [mem 0x6f9cc000-0x6ff99fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6ff9a000-0x6ffccfff] [ 0.000000] PM: Registered nosave memory: [mem 0x70000000-0x700fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x70100000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x70100000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff880fffc00000 s103128 r8192 d32040 u262144 [ 0.000000] pcpu-alloc: s103128 r8192 d32040 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 15926309 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=eb75a1fd-f602-4312-b9ea-44c53b27faf7 rw quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 63544900K/64716552K available (6130K kernel code, 1051K rwdata, 1912K rodata, 1256K init, 1036K bss, 1171652K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:2048 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Detected 3600.000 MHz processor [ 0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 7202.00 BogoMIPS (lpj=12000000) [ 0.000029] pid_max: default: 32768 minimum: 301 [ 0.000046] ACPI: Core revision 20160422 [ 0.024530] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.025246] Security Framework initialized [ 0.025246] Yama: becoming mindful. [ 0.027070] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.034236] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.037336] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.037363] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.037633] CPU: Physical Processor ID: 0 [ 0.037633] CPU: Processor Core ID: 0 [ 0.037637] mce: CPU supports 10 MCE banks [ 0.037643] CPU0: Thermal monitoring enabled (TM1) [ 0.037655] process: using mwait in idle threads [ 0.037657] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.037657] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.037879] Freeing SMP alternatives memory: 24K (ffffffff81a42000 - ffffffff81a48000) [ 0.039879] ftrace: allocating 24337 entries in 96 pages [ 0.046511] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.046511] smpboot: Max logical packages: 2 [ 0.046514] DMAR: Host address width 39 [ 0.046514] DMAR: DRHD base: 0x000000fed90000 flags: 0x1 [ 0.046519] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.046520] DMAR: RMRR base: 0x0000006f8f6000 end: 0x0000006f915fff [ 0.046521] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0 [ 0.046521] DMAR-IR: HPET id 0 under DRHD base 0xfed90000 [ 0.046522] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.046522] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.047881] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.047881] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.052016] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.085024] TSC deadline timer enabled [ 0.085029] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz (family: 0x6, model: 0x5e, stepping: 0x3) [ 0.085031] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.085048] ... version: 4 [ 0.085048] ... bit width: 48 [ 0.085048] ... generic registers: 4 [ 0.085049] ... value mask: 0000ffffffffffff [ 0.085049] ... max period: 0000ffffffffffff [ 0.085049] ... fixed-purpose events: 3 [ 0.085049] ... event mask: 000000070000000f [ 0.108541] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.125102] x86: Booting SMP configuration: [ 0.125104] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.790689] x86: Booted up 1 node, 8 CPUs [ 0.790691] smpboot: Total of 8 processors activated (57631.04 BogoMIPS) [ 0.797364] devtmpfs: initialized [ 0.797398] x86/mm: Memory block size: 2048MB [ 0.798519] PM: Registering ACPI NVS region [mem 0x6df84000-0x6df84fff] (4096 bytes) [ 0.798520] PM: Registering ACPI NVS region [mem 0x6f9cc000-0x6ff99fff] (6086656 bytes) [ 0.798596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.798624] pinctrl core: initialized pinctrl subsystem [ 0.798725] RTC time: 20:26:17, date: 11/05/16 [ 0.799418] NET: Registered protocol family 16 [ 0.813169] cpuidle: using governor ladder [ 0.833186] cpuidle: using governor menu [ 0.833254] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.833270] ACPI: bus type PCI registered [ 0.833270] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.833309] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.833310] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.833318] PCI: Using configuration type 1 for base access [ 0.853323] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.853323] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.853440] ACPI: Added _OSI(Module Device) [ 0.853441] ACPI: Added _OSI(Processor Device) [ 0.853441] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.853441] ACPI: Added _OSI(Processor Aggregator Device) [ 0.854314] ACPI: Executed 23 blocks of module-level executable AML code [ 0.860386] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.918944] ACPI: Dynamic OEM Table Load: [ 0.918947] ACPI: SSDT 0xFFFF880FBAAF5800 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913) [ 0.919530] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked [ 0.920533] ACPI: Dynamic OEM Table Load: [ 0.920536] ACPI: SSDT 0xFFFF880FBAB07000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913) [ 0.921527] ACPI: Dynamic OEM Table Load: [ 0.921530] ACPI: SSDT 0xFFFF880FBAAF1800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913) [ 0.922246] ACPI: Dynamic OEM Table Load: [ 0.922248] ACPI: SSDT 0xFFFF880FBAAFC600 000119 (v02 PmRef ApCst 00003000 INTL 20120913) [ 0.926306] ACPI: Interpreter enabled [ 0.926331] ACPI: (supports S0 S3 S4 S5) [ 0.926332] ACPI: Using IOAPIC for interrupt routing [ 0.926354] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.927747] ACPI: Power Resource [PG00] (on) [ 0.927992] ACPI: Power Resource [PG01] (on) [ 0.928218] ACPI: Power Resource [PG02] (on) [ 0.929681] ACPI: Power Resource [WRST] (off) [ 0.929888] ACPI: Power Resource [WRST] (off) [ 0.930097] ACPI: Power Resource [WRST] (off) [ 0.930303] ACPI: Power Resource [WRST] (off) [ 0.930510] ACPI: Power Resource [WRST] (off) [ 0.930713] ACPI: Power Resource [WRST] (off) [ 0.930917] ACPI: Power Resource [WRST] (off) [ 0.931120] ACPI: Power Resource [WRST] (off) [ 0.931337] ACPI: Power Resource [WRST] (off) [ 0.931542] ACPI: Power Resource [WRST] (off) [ 0.931744] ACPI: Power Resource [WRST] (off) [ 0.931948] ACPI: Power Resource [WRST] (off) [ 0.932152] ACPI: Power Resource [WRST] (off) [ 0.932358] ACPI: Power Resource [WRST] (off) [ 0.932560] ACPI: Power Resource [WRST] (off) [ 0.932763] ACPI: Power Resource [WRST] (off) [ 0.933026] ACPI: Power Resource [WRST] (off) [ 0.933230] ACPI: Power Resource [WRST] (off) [ 0.933434] ACPI: Power Resource [WRST] (off) [ 0.933640] ACPI: Power Resource [WRST] (off) [ 0.938424] ACPI: Power Resource [FN00] (off) [ 0.938468] ACPI: Power Resource [FN01] (off) [ 0.938509] ACPI: Power Resource [FN02] (off) [ 0.938550] ACPI: Power Resource [FN03] (off) [ 0.938592] ACPI: Power Resource [FN04] (off) [ 0.939326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.939329] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.939349] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.939760] PCI host bridge to bus 0000:00 [ 0.939761] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.939762] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.939762] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.939763] pci_bus 0000:00: root bus resource [mem 0x71800000-0xdfffffff window] [ 0.939763] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.939764] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.939769] pci 0000:00:00.0: [8086:1918] type 00 class 0x060000 [ 0.939971] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 [ 0.939998] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.940072] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.940176] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330 [ 0.940192] pci 0000:00:14.0: reg 0x10: [mem 0xda130000-0xda13ffff 64bit] [ 0.940246] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.940310] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.940335] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000 [ 0.940349] pci 0000:00:14.2: reg 0x10: [mem 0xda14e000-0xda14efff 64bit] [ 0.940470] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000 [ 0.940486] pci 0000:00:16.0: reg 0x10: [mem 0xda14d000-0xda14dfff 64bit] [ 0.940547] pci 0000:00:16.0: PME# supported from D3hot [ 0.940644] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601 [ 0.940655] pci 0000:00:17.0: reg 0x10: [mem 0xda148000-0xda149fff] [ 0.940660] pci 0000:00:17.0: reg 0x14: [mem 0xda14c000-0xda14c0ff] [ 0.940666] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] [ 0.940671] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] [ 0.940677] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] [ 0.940682] pci 0000:00:17.0: reg 0x24: [mem 0xda14b000-0xda14b7ff] [ 0.940713] pci 0000:00:17.0: PME# supported from D3hot [ 0.940798] pci 0000:00:1b.0: [8086:a167] type 01 class 0x060400 [ 0.940838] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.940907] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.940934] pci 0000:00:1b.3: [8086:a16a] type 01 class 0x060400 [ 0.940977] pci 0000:00:1b.3: PME# supported from D0 D3hot D3cold [ 0.941048] pci 0000:00:1b.3: System wakeup disabled by ACPI [ 0.941083] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 [ 0.941132] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.941204] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.941228] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400 [ 0.941273] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.941346] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.941369] pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400 [ 0.941412] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.941482] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.941513] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400 [ 0.941563] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.941634] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.941667] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400 [ 0.941716] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold [ 0.941784] pci 0000:00:1d.4: System wakeup disabled by ACPI [ 0.941818] pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100 [ 0.941982] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000 [ 0.941991] pci 0000:00:1f.2: reg 0x10: [mem 0xda144000-0xda147fff] [ 0.942111] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300 [ 0.942130] pci 0000:00:1f.3: reg 0x10: [mem 0xda140000-0xda143fff 64bit] [ 0.942157] pci 0000:00:1f.3: reg 0x20: [mem 0xda120000-0xda12ffff 64bit] [ 0.942199] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.942299] pci 0000:00:1f.3: System wakeup disabled by ACPI [ 0.942327] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500 [ 0.942373] pci 0000:00:1f.4: reg 0x10: [mem 0xda14a000-0xda14a0ff 64bit] [ 0.942442] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] [ 0.942594] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 [ 0.942613] pci 0000:00:1f.6: reg 0x10: [mem 0xda100000-0xda11ffff] [ 0.942708] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.942773] pci 0000:00:1f.6: System wakeup disabled by ACPI [ 0.942820] pci 0000:01:00.0: [10de:1184] type 00 class 0x030000 [ 0.942828] pci 0000:01:00.0: reg 0x10: [mem 0xdb000000-0xdbffffff] [ 0.942837] pci 0000:01:00.0: reg 0x14: [mem 0xb8000000-0xbfffffff 64bit pref] [ 0.942845] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref] [ 0.942850] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f] [ 0.942855] pci 0000:01:00.0: reg 0x30: [mem 0xdc000000-0xdc07ffff pref] [ 0.942907] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.942931] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300 [ 0.942939] pci 0000:01:00.1: reg 0x10: [mem 0xdc080000-0xdc083fff] [ 0.950242] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.950244] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.950245] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff] [ 0.950247] pci 0000:00:01.0: bridge window [mem 0xb8000000-0xc1ffffff 64bit pref] [ 0.950312] acpiphp: Slot [1] registered [ 0.950315] pci 0000:00:1b.0: PCI bridge to [bus 02] [ 0.950388] pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601 [ 0.950402] pci 0000:03:00.0: reg 0x10: [io 0xd050-0xd057] [ 0.950410] pci 0000:03:00.0: reg 0x14: [io 0xd040-0xd043] [ 0.950419] pci 0000:03:00.0: reg 0x18: [io 0xd030-0xd037] [ 0.950427] pci 0000:03:00.0: reg 0x1c: [io 0xd020-0xd023] [ 0.950435] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd01f] [ 0.950443] pci 0000:03:00.0: reg 0x24: [mem 0xdc310000-0xdc3101ff] [ 0.950451] pci 0000:03:00.0: reg 0x30: [mem 0xdc300000-0xdc30ffff pref] [ 0.950537] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.960232] pci 0000:00:1b.3: PCI bridge to [bus 03] [ 0.960238] pci 0000:00:1b.3: bridge window [io 0xd000-0xdfff] [ 0.960257] pci 0000:00:1b.3: bridge window [mem 0xdc300000-0xdc3fffff] [ 0.960320] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.960387] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 0.960388] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff] [ 0.960390] pci 0000:00:1c.2: bridge window [mem 0xdc200000-0xdc2fffff] [ 0.960465] pci 0000:06:00.0: [8086:1578] type 01 class 0x060400 [ 0.960548] pci 0000:06:00.0: supports D1 D2 [ 0.960549] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.960609] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.970242] pci 0000:00:1c.4: PCI bridge to [bus 06-70] [ 0.970250] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xda0fffff] [ 0.970268] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 0.970270] pci 0000:06:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.970307] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06-70] (conflicts with (null) [bus 06-70]) [ 0.970320] pci 0000:07:00.0: [8086:1578] type 01 class 0x060400 [ 0.970407] pci 0000:07:00.0: supports D1 D2 [ 0.970407] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.970460] pci 0000:07:01.0: [8086:1578] type 01 class 0x060400 [ 0.970547] pci 0000:07:01.0: supports D1 D2 [ 0.970547] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.970598] pci 0000:07:02.0: [8086:1578] type 01 class 0x060400 [ 0.970684] pci 0000:07:02.0: supports D1 D2 [ 0.970684] pci 0000:07:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.970736] pci 0000:07:04.0: [8086:1578] type 01 class 0x060400 [ 0.970822] pci 0000:07:04.0: supports D1 D2 [ 0.970823] pci 0000:07:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.970890] pci 0000:06:00.0: PCI bridge to [bus 07-ff] [ 0.970895] pci 0000:06:00.0: bridge window [io 0x0000-0x0fff] [ 0.970897] pci 0000:06:00.0: bridge window [mem 0x00000000-0x000fffff] [ 0.970902] pci 0000:06:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.970904] pci 0000:07:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.970909] pci 0000:07:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.970915] pci 0000:07:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.970920] pci 0000:07:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.970959] pci 0000:07:00.0: PCI bridge to [bus 08-ff] [ 0.970963] pci 0000:07:00.0: bridge window [io 0x0000-0x0fff] [ 0.970966] pci 0000:07:00.0: bridge window [mem 0x00000000-0x000fffff] [ 0.970971] pci 0000:07:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.970972] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08 [ 0.971008] pci 0000:07:01.0: PCI bridge to [bus 09-ff] [ 0.971012] pci 0000:07:01.0: bridge window [io 0x0000-0x0fff] [ 0.971015] pci 0000:07:01.0: bridge window [mem 0x00000000-0x000fffff] [ 0.971019] pci 0000:07:01.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.971020] pci_bus 0000:09: busn_res: [bus 09-ff] end is updated to 09 [ 0.971069] pci 0000:0a:00.0: [8086:15b6] type 00 class 0x0c0330 [ 0.971084] pci 0000:0a:00.0: reg 0x10: [mem 0x00000000-0x0000ffff] [ 0.971208] pci 0000:0a:00.0: supports D1 D2 [ 0.971208] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.971280] pci 0000:07:02.0: PCI bridge to [bus 0a-ff] [ 0.971285] pci 0000:07:02.0: bridge window [io 0x0000-0x0fff] [ 0.971287] pci 0000:07:02.0: bridge window [mem 0x00000000-0x000fffff] [ 0.971292] pci 0000:07:02.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.971292] pci_bus 0000:0a: busn_res: [bus 0a-ff] end is updated to 0a [ 0.971328] pci 0000:07:04.0: PCI bridge to [bus 0b-ff] [ 0.971333] pci 0000:07:04.0: bridge window [io 0x0000-0x0fff] [ 0.971335] pci 0000:07:04.0: bridge window [mem 0x00000000-0x000fffff] [ 0.971340] pci 0000:07:04.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.971340] pci_bus 0000:0b: busn_res: [bus 0b-ff] end is updated to 0b [ 0.971343] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0b [ 0.971406] pci 0000:00:1d.0: PCI bridge to [bus 71] [ 0.971476] acpiphp: Slot [1-1] registered [ 0.971484] pci 0000:00:1d.4: PCI bridge to [bus 72] [ 0.972798] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.972830] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.972862] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15) [ 0.972893] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15) [ 0.972924] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.972955] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.972987] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.973018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.973275] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.973330] vgaarb: setting as boot device: PCI:0000:01:00.0 [ 0.973330] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.973331] vgaarb: loaded [ 0.973332] vgaarb: bridge control possible 0000:01:00.0 [ 0.977322] PCI: Using ACPI for IRQ routing [ 0.996003] PCI: pci_cache_line_size set to 64 bytes [ 0.996063] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.996064] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.996064] e820: reserve RAM buffer [mem 0x6df84000-0x6fffffff] [ 0.996065] e820: reserve RAM buffer [mem 0x6e027000-0x6fffffff] [ 0.996066] e820: reserve RAM buffer [mem 0x6ed2e000-0x6fffffff] [ 0.996116] NetLabel: Initializing [ 0.996117] NetLabel: domain hash size = 128 [ 0.996117] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.996124] NetLabel: unlabeled traffic allowed by default [ 0.996191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.996194] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.998234] clocksource: Switched to clocksource hpet [ 1.001805] VFS: Disk quotas dquot_6.6.0 [ 1.001857] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.001895] pnp: PnP ACPI init [ 1.002053] system 00:00: [io 0x0a00-0x0a2f] has been reserved [ 1.002054] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 1.002055] system 00:00: [io 0x0a40-0x0a4f] has been reserved [ 1.002057] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.002301] system 00:01: [io 0x0680-0x069f] has been reserved [ 1.002302] system 00:01: [io 0xffff] has been reserved [ 1.002303] system 00:01: [io 0xffff] has been reserved [ 1.002303] system 00:01: [io 0xffff] has been reserved [ 1.002304] system 00:01: [io 0x1800-0x18fe] has been reserved [ 1.002304] system 00:01: [io 0x164e-0x164f] has been reserved [ 1.002306] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.002363] system 00:02: [io 0x0800-0x087f] has been reserved [ 1.002364] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.002376] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.002398] system 00:04: [io 0x1854-0x1857] has been reserved [ 1.002399] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.002530] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.002530] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.002531] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.002532] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 1.002532] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.002533] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.002534] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.002535] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 1.002535] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.002536] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 1.002537] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.002562] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 1.002562] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 1.002563] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 1.002564] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 1.002564] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 1.002565] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 1.002566] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 1.002567] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.003226] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 1.003227] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 1.003228] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved [ 1.003229] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.003738] pnp: PnP ACPI: found 8 devices [ 1.011606] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.011640] pci 0000:07:01.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000 [ 1.011641] pci 0000:07:01.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000 add_align 100000 [ 1.011642] pci 0000:07:01.0: bridge window [mem 0x00100000-0x000fffff] to [bus 09] add_size 200000 add_align 100000 [ 1.011655] pci 0000:07:04.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000 [ 1.011656] pci 0000:07:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000 [ 1.011656] pci 0000:07:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000 [ 1.011663] pci 0000:07:01.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.011664] pci 0000:07:04.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.011665] pci 0000:06:00.0: bridge window [io 0x1000-0x0fff] to [bus 07-0b] add_size 2000 [ 1.011665] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011666] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011667] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011668] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011668] pci 0000:06:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-0b] add_size 400000 add_align 100000 [ 1.011669] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011670] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011671] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011671] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011672] pci 0000:06:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 07-0b] add_size 400000 add_align 100000 [ 1.011676] pci 0000:06:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 2000 min_align 1000 [ 1.011677] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 06-70] add_size 2000 [ 1.011688] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 2000 min_align 1000 [ 1.011689] pci 0000:00:1c.4: res[13]=[io 0x1000-0x2fff] res_to_dev_res add_size 2000 min_align 1000 [ 1.011690] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x3fff] [ 1.011692] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.011693] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 1.011694] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff] [ 1.011696] pci 0000:00:01.0: bridge window [mem 0xb8000000-0xc1ffffff 64bit pref] [ 1.011698] pci 0000:00:1b.0: PCI bridge to [bus 02] [ 1.011704] pci 0000:00:1b.3: PCI bridge to [bus 03] [ 1.011705] pci 0000:00:1b.3: bridge window [io 0xd000-0xdfff] [ 1.011707] pci 0000:00:1b.3: bridge window [mem 0xdc300000-0xdc3fffff] [ 1.011711] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 1.011717] pci 0000:00:1c.2: PCI bridge to [bus 05] [ 1.011718] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff] [ 1.011721] pci 0000:00:1c.2: bridge window [mem 0xdc200000-0xdc2fffff] [ 1.011727] pci 0000:06:00.0: res[14]=[mem 0x00100000-0x001fffff] res_to_dev_res add_size 400000 min_align 100000 [ 1.011727] pci 0000:06:00.0: res[14]=[mem 0x00100000-0x005fffff] res_to_dev_res add_size 400000 min_align 100000 [ 1.011728] pci 0000:06:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000 [ 1.011729] pci 0000:06:00.0: res[15]=[mem 0x00100000-0x004fffff 64bit pref] res_to_dev_res add_size 400000 min_align 100000 [ 1.011729] pci 0000:06:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 2000 min_align 1000 [ 1.011730] pci 0000:06:00.0: res[13]=[io 0x1000-0x2fff] res_to_dev_res add_size 2000 min_align 1000 [ 1.011731] pci 0000:06:00.0: BAR 14: assigned [mem 0xc4000000-0xc44fffff] [ 1.011732] pci 0000:06:00.0: BAR 15: assigned [mem 0x90000000-0x903fffff 64bit pref] [ 1.011733] pci 0000:06:00.0: BAR 13: assigned [io 0x2000-0x3fff] [ 1.011735] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011735] pci 0000:07:01.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011736] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011737] pci 0000:07:01.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011737] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011738] pci 0000:07:04.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 1.011739] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011739] pci 0000:07:04.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 1.011740] pci 0000:07:01.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.011741] pci 0000:07:01.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.011741] pci 0000:07:04.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.011742] pci 0000:07:04.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000 [ 1.011743] pci 0000:07:01.0: BAR 14: assigned [mem 0xc4000000-0xc41fffff] [ 1.011744] pci 0000:07:01.0: BAR 15: assigned [mem 0x90000000-0x901fffff 64bit pref] [ 1.011744] pci 0000:07:02.0: BAR 14: assigned [mem 0xc4200000-0xc42fffff] [ 1.011745] pci 0000:07:04.0: BAR 14: assigned [mem 0xc4300000-0xc44fffff] [ 1.011746] pci 0000:07:04.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] [ 1.011747] pci 0000:07:01.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.011747] pci 0000:07:04.0: BAR 13: assigned [io 0x3000-0x3fff] [ 1.011748] pci 0000:07:00.0: PCI bridge to [bus 08] [ 1.011758] pci 0000:07:01.0: PCI bridge to [bus 09] [ 1.011759] pci 0000:07:01.0: bridge window [io 0x2000-0x2fff] [ 1.011763] pci 0000:07:01.0: bridge window [mem 0xc4000000-0xc41fffff] [ 1.011765] pci 0000:07:01.0: bridge window [mem 0x90000000-0x901fffff 64bit pref] [ 1.011770] pci 0000:0a:00.0: BAR 0: assigned [mem 0xc4200000-0xc420ffff] [ 1.011774] pci 0000:07:02.0: PCI bridge to [bus 0a] [ 1.011778] pci 0000:07:02.0: bridge window [mem 0xc4200000-0xc42fffff] [ 1.011784] pci 0000:07:04.0: PCI bridge to [bus 0b] [ 1.011786] pci 0000:07:04.0: bridge window [io 0x3000-0x3fff] [ 1.011789] pci 0000:07:04.0: bridge window [mem 0xc4300000-0xc44fffff] [ 1.011792] pci 0000:07:04.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] [ 1.011796] pci 0000:06:00.0: PCI bridge to [bus 07-0b] [ 1.011798] pci 0000:06:00.0: bridge window [io 0x2000-0x3fff] [ 1.011801] pci 0000:06:00.0: bridge window [mem 0xc4000000-0xc44fffff] [ 1.011804] pci 0000:06:00.0: bridge window [mem 0x90000000-0x903fffff 64bit pref] [ 1.011808] pci 0000:00:1c.4: PCI bridge to [bus 06-70] [ 1.011809] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff] [ 1.011811] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xda0fffff] [ 1.011813] pci 0000:00:1c.4: bridge window [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.011816] pci 0000:00:1d.0: PCI bridge to [bus 71] [ 1.011822] pci 0000:00:1d.4: PCI bridge to [bus 72] [ 1.011830] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.011831] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.011832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.011832] pci_bus 0000:00: resource 7 [mem 0x71800000-0xdfffffff window] [ 1.011833] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] [ 1.011833] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.011834] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff] [ 1.011834] pci_bus 0000:01: resource 2 [mem 0xb8000000-0xc1ffffff 64bit pref] [ 1.011835] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 1.011836] pci_bus 0000:03: resource 1 [mem 0xdc300000-0xdc3fffff] [ 1.011836] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 1.011837] pci_bus 0000:05: resource 1 [mem 0xdc200000-0xdc2fffff] [ 1.011837] pci_bus 0000:06: resource 0 [io 0x2000-0x3fff] [ 1.011838] pci_bus 0000:06: resource 1 [mem 0xc4000000-0xda0fffff] [ 1.011838] pci_bus 0000:06: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref] [ 1.011839] pci_bus 0000:07: resource 0 [io 0x2000-0x3fff] [ 1.011840] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc44fffff] [ 1.011840] pci_bus 0000:07: resource 2 [mem 0x90000000-0x903fffff 64bit pref] [ 1.011841] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff] [ 1.011841] pci_bus 0000:09: resource 1 [mem 0xc4000000-0xc41fffff] [ 1.011842] pci_bus 0000:09: resource 2 [mem 0x90000000-0x901fffff 64bit pref] [ 1.011842] pci_bus 0000:0a: resource 1 [mem 0xc4200000-0xc42fffff] [ 1.011843] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff] [ 1.011843] pci_bus 0000:0b: resource 1 [mem 0xc4300000-0xc44fffff] [ 1.011844] pci_bus 0000:0b: resource 2 [mem 0x90200000-0x903fffff 64bit pref] [ 1.011859] NET: Registered protocol family 2 [ 1.012010] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.012391] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.012469] TCP: Hash tables configured (established 524288 bind 65536) [ 1.012496] UDP hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.012592] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes) [ 1.012691] NET: Registered protocol family 1 [ 1.041112] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.041186] pci 0000:06:00.0: enabling device (0000 -> 0003) [ 1.041216] pci 0000:07:02.0: enabling device (0000 -> 0002) [ 1.041246] pci 0000:0a:00.0: enabling device (0000 -> 0002) [ 1.041315] PCI: CLS 0 bytes, default 64 [ 1.041336] Unpacking initramfs... [ 1.096225] Freeing initrd memory: 6496K (ffff88003733f000 - ffff880037997000) [ 1.096245] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.096246] software IO TLB [mem 0x657d1000-0x697d1000] (64MB) mapped at [ffff8800657d1000-ffff8800697d0fff] [ 1.096712] Scanning for low memory corruption every 60 seconds [ 1.096883] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 1.097121] Initialise system trusted keyrings [ 1.097409] workingset: timestamp_bits=40 max_order=24 bucket_order=0 [ 1.098319] zbud: loaded [ 1.098459] Key type big_key registered [ 1.098932] Key type asymmetric registered [ 1.098949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.099057] io scheduler noop registered [ 1.099058] io scheduler deadline registered [ 1.099062] io scheduler cfq registered (default) [ 1.099471] pcieport 0000:00:1c.2: enabling device (0000 -> 0003) [ 1.099932] pcieport 0000:07:01.0: enabling device (0000 -> 0003) [ 1.100126] pcieport 0000:07:04.0: enabling device (0000 -> 0003) [ 1.100245] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.100248] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.100254] efifb: probing for efifb [ 1.100261] efifb: framebuffer at 0xc1000000, using 3072k, total 3072k [ 1.100262] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.100262] efifb: scrolling: redraw [ 1.100263] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.101369] Console: switching to colour frame buffer device 128x48 [ 1.102476] fb0: EFI VGA frame buffer device [ 1.102480] intel_idle: MWAIT substates: 0x142120 [ 1.102480] intel_idle: v0.4.1 model 0x5E [ 1.102671] intel_idle: lapic_timer_reliable_states 0xffffffff [ 1.102778] GHES: HEST is not enabled! [ 1.102824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.103198] Linux agpgart interface v0.103 [ 1.103580] rtc_cmos 00:03: RTC can wake from S4 [ 1.103956] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.104041] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.104044] intel_pstate: Intel P-state driver initializing [ 1.104440] intel_pstate: HWP enabled [ 1.104625] ledtrig-cpu: registered to indicate activity on CPUs [ 1.104809] NET: Registered protocol family 10 [ 1.105190] NET: Registered protocol family 17 [ 1.105360] microcode: sig=0x506e3, pf=0x2, revision=0x9e [ 1.105677] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.105836] registered taskstats version 1 [ 1.105837] Loading compiled-in X.509 certificates [ 1.105844] zswap: loaded using pool lzo/zbud [ 1.108883] Magic number: 8:901:446 [ 1.109209] rtc_cmos 00:03: setting system clock to 2016-11-05 20:26:17 UTC (1478377577) [ 1.109241] PM: Hibernation image not present or could not be loaded. [ 1.109941] Freeing unused kernel memory: 1256K (ffffffff81908000 - ffffffff81a42000) [ 1.109941] Write protecting the kernel read-only data: 8192k [ 1.110428] Freeing unused kernel memory: 136K (ffff8800017de000 - ffff880001800000) [ 1.115087] random: systemd-tmpfile: uninitialized urandom read (16 bytes read) [ 1.116077] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.116100] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.116442] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.116451] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.117558] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.117567] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.117570] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.117714] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.117724] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.144516] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.145664] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.145685] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.159210] ACPI: bus type USB registered [ 1.159221] usbcore: registered new interface driver usbfs [ 1.159230] usbcore: registered new interface driver hub [ 1.159278] usbcore: registered new device driver usb [ 1.159420] SCSI subsystem initialized [ 1.161373] libata version 3.00 loaded. [ 1.161400] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.161419] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.162876] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810 [ 1.162881] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.163078] hub 1-0:1.0: USB hub found [ 1.163113] hub 1-0:1.0: 16 ports detected [ 1.172477] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.172479] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.172625] hub 2-0:1.0: USB hub found [ 1.172644] hub 2-0:1.0: 10 ports detected [ 1.176377] usb: port power management may be unreliable [ 1.177992] ahci 0000:00:17.0: version 3.0 [ 1.178050] xhci_hcd 0000:0a:00.0: xHCI Host Controller [ 1.178052] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 3 [ 1.179326] xhci_hcd 0000:0a:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810 [ 1.179727] hub 3-0:1.0: USB hub found [ 1.179731] hub 3-0:1.0: 2 ports detected [ 1.179818] xhci_hcd 0000:0a:00.0: xHCI Host Controller [ 1.179820] xhci_hcd 0000:0a:00.0: new USB bus registered, assigned bus number 4 [ 1.180140] hub 4-0:1.0: USB hub found [ 1.180177] hub 4-0:1.0: 2 ports detected [ 1.188494] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.188495] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst [ 1.240580] scsi host0: ahci [ 1.241175] scsi host1: ahci [ 1.241767] scsi host2: ahci [ 1.242345] scsi host3: ahci [ 1.242906] scsi host4: ahci [ 1.243457] scsi host5: ahci [ 1.243634] ata1: SATA max UDMA/133 abar m2048@0xda14b000 port 0xda14b100 irq 128 [ 1.243638] ata2: SATA max UDMA/133 abar m2048@0xda14b000 port 0xda14b180 irq 128 [ 1.243642] ata3: SATA max UDMA/133 abar m2048@0xda14b000 port 0xda14b200 irq 128 [ 1.243645] ata4: SATA max UDMA/133 abar m2048@0xda14b000 port 0xda14b280 irq 128 [ 1.243649] ata5: SATA max UDMA/133 abar m2048@0xda14b000 port 0xda14b300 irq 128 [ 1.243652] ata6: SATA max UDMA/133 abar m2048@0xda14b000 port 0xda14b380 irq 128 [ 1.244097] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled [ 1.244157] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.244162] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 1.245240] scsi host6: ahci [ 1.245657] scsi host7: ahci [ 1.245813] ata7: SATA max UDMA/133 abar m512@0xdc310000 port 0xdc310100 irq 130 [ 1.245818] ata8: SATA max UDMA/133 abar m512@0xdc310000 port 0xdc310180 irq 130 [ 1.491642] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.558506] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.559259] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.559315] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.559438] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.559482] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.559550] ata7: SATA link down (SStatus 0 SControl 300) [ 1.559554] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.560086] ata1.00: NCQ Send/Recv Log not supported [ 1.560090] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 [ 1.560093] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.560420] ata3.00: supports DRM functions and may not be fully accessible [ 1.560472] ata2.00: NCQ Send/Recv Log not supported [ 1.560477] ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 [ 1.560481] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.560636] ata4.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133 [ 1.560640] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.560683] ata5.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 1.560687] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.560700] ata1.00: NCQ Send/Recv Log not supported [ 1.560707] ata1.00: configured for UDMA/133 [ 1.560863] ata3.00: NCQ Send/Recv Log not supported [ 1.560868] ata3.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0BB6Q, max UDMA/133 [ 1.560873] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 1.561015] ata6.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133 [ 1.561018] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.561067] ata2.00: NCQ Send/Recv Log not supported [ 1.561076] ata2.00: configured for UDMA/133 [ 1.561248] ata3.00: supports DRM functions and may not be fully accessible [ 1.561534] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 1.561620] ata4.00: configured for UDMA/133 [ 1.561681] ata3.00: NCQ Send/Recv Log not supported [ 1.561689] ata3.00: configured for UDMA/133 [ 1.561924] ata5.00: configured for UDMA/133 [ 1.562695] ata6.00: configured for UDMA/133 [ 1.599281] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 1.623106] hub 1-1:1.0: USB hub found [ 1.623163] hub 1-1:1.0: 4 ports detected [ 1.652807] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 [ 1.702916] scsi 3:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5 [ 1.735132] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.742785] scsi 4:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 1.756386] hub 2-1:1.0: USB hub found [ 1.756694] hub 2-1:1.0: 4 ports detected [ 1.786296] scsi 5:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5 [ 1.921824] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 2.054865] hub 1-3:1.0: USB hub found [ 2.055213] hub 1-3:1.0: 3 ports detected [ 2.108466] tsc: Refined TSC clocksource calibration: 3600.002 MHz [ 2.108482] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4559ce44, max_idle_ns: 440795364889 ns [ 2.136613] ata8: SATA link down (SStatus 0 SControl 300) [ 2.143693] ata1.00: Enabling discard_zeroes_data [ 2.143713] ata2.00: Enabling discard_zeroes_data [ 2.143748] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) [ 2.143779] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.143811] sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.143812] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 2.143856] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.143857] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.143858] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 2.143976] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.143977] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 2.144178] sd 0:0:0:0: [sda] Write Protect is off [ 2.144179] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.144227] sd 3:0:0:0: [sdd] Write Protect is off [ 2.144228] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.144250] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144286] sd 1:0:0:0: [sdb] Write Protect is off [ 2.144286] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.144353] sd 5:0:0:0: [sdf] Write Protect is off [ 2.144355] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 2.144371] sd 2:0:0:0: [sdc] Write Protect is off [ 2.144372] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.144380] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144387] ata1.00: Enabling discard_zeroes_data [ 2.144407] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144421] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144434] sd 4:0:0:0: [sde] Write Protect is off [ 2.144435] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 2.144475] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144601] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144606] ata2.00: Enabling discard_zeroes_data [ 2.146447] sda: sda1 sda2 sda3 sda4 sda5 [ 2.146801] ata1.00: Enabling discard_zeroes_data [ 2.147198] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.147258] sdb: sdb1 sdb2 [ 2.147442] ata2.00: Enabling discard_zeroes_data [ 2.147759] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.147900] sdc: sdc1 sdc2 [ 2.148622] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.158007] random: fast init done [ 2.175015] usb 1-5: new high-speed USB device number 4 using xhci_hcd [ 2.178100] sde: sde1 [ 2.179450] sd 4:0:0:0: [sde] Attached SCSI disk [ 2.203121] GPT:disk_guids don't match. [ 2.203124] GPT:partition_entry_array_crc32 values don't match: 0xa45bd3ef != 0x6849bdb5 [ 2.203126] GPT: Use GNU Parted to correct GPT errors. [ 2.203144] sdf: sdf1 [ 2.204157] sd 5:0:0:0: [sdf] Attached SCSI disk [ 2.213046] sdd: sdd1 sdd2 [ 2.213948] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.308952] hub 1-5:1.0: USB hub found [ 2.309248] hub 1-5:1.0: 4 ports detected [ 2.378344] usb 1-3.2: new full-speed USB device number 5 using xhci_hcd [ 2.580579] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 2.588436] usb 1-7: new full-speed USB device number 6 using xhci_hcd [ 2.689932] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.741070] systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 2.741180] systemd[1]: Detected architecture x86-64. [ 2.741387] systemd[1]: Set hostname to . [ 2.791709] usb 1-3.3: new full-speed USB device number 7 using xhci_hcd [ 2.795787] systemd[1]: Listening on udev Kernel Socket. [ 2.795991] systemd[1]: Created slice User and Session Slice. [ 2.796055] systemd[1]: Created slice System Slice. [ 2.796087] systemd[1]: Reached target Slices. [ 2.796116] systemd[1]: Reached target Login Prompts. [ 2.796157] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 2.798907] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.826984] EXT4-fs (sdb2): re-mounted. Opts: data=ordered [ 2.963909] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 2.963911] ACPI: Sleep Button [SLPB] [ 2.963958] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 2.963959] ACPI: Power Button [PWRB] [ 2.963984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.963985] ACPI: Power Button [PWRF] [ 2.981923] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 2.989726] hidraw: raw HID events driver (C) Jiri Kosina [ 2.995882] wmi: Mapper loaded [ 3.003970] Bluetooth: Core ver 2.21 [ 3.003979] NET: Registered protocol family 31 [ 3.003979] Bluetooth: HCI device and connection manager initialized [ 3.003981] Bluetooth: HCI socket layer initialized [ 3.003983] Bluetooth: L2CAP socket layer initialized [ 3.003986] Bluetooth: SCO socket layer initialized [ 3.005043] usb 1-8: new full-speed USB device number 8 using xhci_hcd [ 3.006630] systemd-journald[227]: Received request to flush runtime journal from PID 1 [ 3.046969] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.046970] ACPI: Thermal Zone [TZ00] (28 C) [ 3.047124] thermal LNXTHERM:01: registered as thermal_zone1 [ 3.047124] ACPI: Thermal Zone [TZ01] (30 C) [ 3.047153] Bluetooth: HCI UART driver ver 2.3 [ 3.047154] Bluetooth: HCI UART protocol H4 registered [ 3.047154] Bluetooth: HCI UART protocol BCSP registered [ 3.047154] Bluetooth: HCI UART protocol LL registered [ 3.047155] Bluetooth: HCI UART protocol ATH3K registered [ 3.047155] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 3.047190] Bluetooth: HCI UART protocol Intel registered [ 3.047198] Bluetooth: HCI UART protocol BCM registered [ 3.047199] Bluetooth: HCI UART protocol QCA registered [ 3.047200] Bluetooth: HCI UART protocol AG6XX registered [ 3.056398] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.058645] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.061226] EDAC MC: Ver: 3.0.0 [ 3.061350] i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003) [ 3.061531] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 3.065602] random: crng init done [ 3.065620] pps_core: LinuxPPS API ver. 1 registered [ 3.065620] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.067386] PTP clock support registered [ 3.069345] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED) [ 3.085141] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.086958] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 3.086959] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.086960] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.086960] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.086961] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.086961] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 3.090779] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.090780] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.097027] [drm] Initialized drm 1.1.0 20060810 [ 3.103081] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.111434] AVX2 version of gcm_enc/dec engaged. [ 3.111435] AES CTR mode by8 optimization enabled [ 3.122073] clocksource: Switched to clocksource tsc [ 3.146245] iTCO_vendor_support: vendor-support=0 [ 3.148304] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.148449] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) [ 3.148614] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.148982] intel_rapl: Found RAPL domain package [ 3.148983] intel_rapl: Found RAPL domain core [ 3.148985] intel_rapl: Found RAPL domain dram [ 3.154251] usbcore: registered new interface driver usbhid [ 3.154252] usbhid: USB HID core driver [ 3.154284] media: Linux media interface: v0.10 [ 3.157190] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:046D:C07D.0001/input/input7 [ 3.157372] hid-generic 0003:046D:C07D.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-7/input0 [ 3.157392] Linux video capture interface: v2.00 [ 3.158292] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:046D:C07D.0002/input/input8 [ 3.158898] gspca_main: v2.14.0 registered [ 3.159040] input: ROCCAT ROCCAT Ryos MK Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1E7D:3232.0003/input/input9 [ 3.160050] gspca_main: gspca_zc3xx-2.14.0 probing 046d:08ad [ 3.193974] nvidia: loading out-of-tree module taints kernel. [ 3.193978] nvidia: module license 'NVIDIA' taints kernel. [ 3.193978] Disabling lock debugging due to kernel taint [ 3.199448] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 3.199495] nvidia-nvlink: Nvlink Core is being initialized, major device number 239 [ 3.199504] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.10 Fri Oct 14 10:30:06 PDT 2016 (using threaded interrupts) [ 3.204645] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.10 Fri Oct 14 10:05:55 PDT 2016 [ 3.205786] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver [ 3.215102] hid-generic 0003:046D:C07D.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-7/input1 [ 3.215288] input: RODE Microphones RODE NT-USB as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.3/0003:19F7:0003.0005/input/input10 [ 3.227116] md: bind [ 3.260377] md: bind [ 3.265152] md: raid10 personality registered for level 10 [ 3.265305] md/raid10:md127: not clean -- starting background reconstruction [ 3.265306] md/raid10:md127: active with 2 out of 2 devices [ 3.265354] created bitmap (15 pages) for device md127 [ 3.265904] md127: bitmap initialized from disk: read 1 pages, set 17142 of 29807 bits [ 3.271712] ryos 0003:1E7D:3232.0003: input,hidraw2: USB HID v1.11 Keyboard [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:14.0-3.3/input0 [ 3.294230] input: ROCCAT ROCCAT Ryos MK Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1E7D:3232.0004/input/input11 [ 3.328364] hid-generic 0003:19F7:0003.0005: input,hiddev0,hidraw3: USB HID v1.00 Device [RODE Microphones RODE NT-USB] on usb-0000:00:14.0-8/input3 [ 3.344809] md127: detected capacity change from 0 to 2000263577600 [ 3.385022] ryos 0003:1E7D:3232.0004: input,hiddev0,hidraw4: USB HID v1.11 Pointer [ROCCAT ROCCAT Ryos MK Pro] on usb-0000:00:14.0-3.3/input1 [ 3.385065] mousedev: PS/2 mouse device common for all mice [ 3.528818] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 3.615666] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 40:8d:5c:e2:ab:79 [ 3.615670] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 3.615753] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 3.616046] snd_hda_intel 0000:01:00.1: Disabling MSI [ 3.616048] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client [ 3.617523] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 [ 3.633037] snd_hda_codec_ca0132 hdaudioC0D0: autoconfig for CA0132: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line [ 3.633038] snd_hda_codec_ca0132 hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.633039] snd_hda_codec_ca0132 hdaudioC0D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0) [ 3.633039] snd_hda_codec_ca0132 hdaudioC0D0: mono: mono_out=0x0 [ 3.633040] snd_hda_codec_ca0132 hdaudioC0D0: dig-out=0xc/0x0 [ 3.633040] snd_hda_codec_ca0132 hdaudioC0D0: inputs: [ 3.633041] snd_hda_codec_ca0132 hdaudioC0D0: Mic=0x12 [ 3.633041] snd_hda_codec_ca0132 hdaudioC0D0: Line=0x11 [ 3.931157] NVRM: Your system is not currently configured to drive a VGA console [ 3.931161] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 3.931163] NVRM: requires the use of a text-mode VGA console. Use of other console [ 3.931165] NVRM: drivers including, but not limited to, vesafb, may result in [ 3.931166] NVRM: corruption and stability problems, and is not supported. [ 3.933054] nvidia-modeset: Allocated GPU:0 (GPU-446ab0ba-a3a7-d22e-51af-ccc1c8b89978) @ PCI:0000:01:00.0 [ 4.199124] input: gspca_zc3xx as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/input/input13 [ 4.199466] usbcore: registered new interface driver gspca_zc3xx [ 4.211219] usbcore: registered new interface driver snd-usb-audio [ 4.225163] snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running [ 4.232110] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12 [ 4.232150] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14 [ 4.232183] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15 [ 4.232442] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16 [ 4.581159] input: HDA Intel PCH Front Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.581300] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 4.581425] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 5.375225] snd_hda_codec_ca0132 hdaudioC0D0: ca0132 DSP downloaded and running On 05.11.2016 21:20, Phil Turmel wrote: > On 11/05/2016 10:10 AM, Darko Luketic wrote: > >> Now. I'd like to save whatever data is possible to be saved. >> >> I'd like to force the 2 drives to be recognized as being in a RAID10 >> array. By whatever means necessary, without losing more data. > You haven't provided anywhere near enough data to advise you. At the > very least, provide "mdadm -E /dev/sdXn" for each member device and your > dmesg from the current environment, plus syslogs showing the last > assembly of the raid10 you think you want. Paste inline, please. > > If you can, run lsdrv[1] on your current environment and paste that in > your reply as well. > > Phil > > [1] https://github.com/pturmel/lsdrv > > -- > To unsubscribe from this list: send the line "unsubscribe linux-raid" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html