From: "Marc Rechté" <marc3@rechte.fr>
To: linux-raid@vger.kernel.org
Subject: Re: Linux tries to bring up raid before the disks are finished initializing
Date: Wed, 16 Feb 2011 09:33:34 +0100 [thread overview]
Message-ID: <ijg24l$p2e$1@dough.gmane.org> (raw)
In-Reply-To: <971504.54875.qm@web30805.mail.mud.yahoo.com>
Hello Mike,
I found you discussion regarding a problem you had with a PMP with an
Adaptec 1430SA configuration with several SATA disks connected though 3
x SII3726 port multiplier
Could you please confirm this Adpatec card support properly PMP, because
Adpatec support tech. say this card is not tested: "The 1430SA is a SATA
2 controller and has not been tested with expanders."
I am currently facing disk detection problem with the AMD700 SATA chip
(cold book will either not detect any disk, or some of them, but warm
reboot detects them all) that's why I envisage this Adpatec controller
alternative.
It seems the SB700 series chip has a known problem with PMP (see
http://en.wikipedia.org/wiki/AMD_700_chipset_series#Southbridges).
Kernel I use is 2.6.32 (RHEL6).
Many thanks
next prev parent reply other threads:[~2011-02-16 8:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-30 19:18 Linux tries to bring up raid before the disks are finished initializing Mike Myers
2011-02-16 8:33 ` Marc Rechté [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-08-30 21:21 David Lethe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='ijg24l$p2e$1@dough.gmane.org' \
--to=marc3@rechte.fr \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).