linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Brown <david.brown@hesbynett.no>
To: linux-raid@vger.kernel.org
Subject: Re: Recovery of failed RAID 6 and LVM
Date: Thu, 29 Sep 2011 19:14:23 +0200	[thread overview]
Message-ID: <j6291f$fkq$1@dough.gmane.org> (raw)
In-Reply-To: <4E848D0E.3090308@hardwarefreak.com>

On 29/09/11 17:21, Stan Hoeppner wrote:
> On 9/29/2011 4:03 AM, David Brown wrote:
>
>> One challenge for getting apprentices in this particular area is the
>> hardware costs. For someone to be able to really help you out in
>> development and serious testing of md, they are going to need access to
>> a machine with plenty of disks, preferably with hotplug bays and with a
>> mix of hdds and ssds. That's going to out of reach for many potential
>> assistants - it is hard enough finding someone with the required talent,
>> interest and time to spend on md/mdadm. Finding people with money -
>> especially people using md raid professionally - should be a lot easier.
>> So if there is anyone out there who is willing and able to contribute
>> seriously to md/mdadm, but is hindered by lack of hardware, then I for
>> one would be willing to contribute to a fund to help out.
>
> Almost a dozen different people from Intel have contributed code
> recently. I would think such folks wouldn't have any problem getting
> access to all the hardware they could need given Intel's financial
> resources. Seems like a good recruiting pool.
>

I am sure you are right that these people should have access to plenty 
of hardware - in particular, they should be in an ideal position to help 
with testing/tuning for SSD usage.  But they may not have the time to 
help much, unless Intel is happy to pay them to do so.  People who have 
lots of time - say, a new graduate or someone "between jobs" - often 
don't have the hardware.  All I am saying is that /if/ there are such 
people around, and they are serious about working on md, then I think it 
should be possible to raise a little money to help them help us.  (The 
same applies to existing md developers, of course.)


  reply	other threads:[~2011-09-29 17:14 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-25  7:55 Recovery of failed RAID 6 and LVM Marcin M. Jessa
2011-09-25  8:39 ` Stan Hoeppner
2011-09-25 10:07   ` Marcin M. Jessa
2011-09-25 13:15 ` Phil Turmel
2011-09-25 14:16   ` Marcin M. Jessa
2011-09-25 16:43     ` Phil Turmel
2011-09-25 14:41   ` Marcin M. Jessa
2011-09-25 16:19     ` Phil Turmel
2011-09-25 21:40 ` NeilBrown
2011-09-25 21:58   ` Marcin M. Jessa
2011-09-25 22:18     ` NeilBrown
2011-09-25 22:21       ` Marcin M. Jessa
     [not found]       ` <4E804062.3020700@yazzy.org>
2011-09-26  9:31         ` NeilBrown
2011-09-26 10:53           ` Marcin M. Jessa
2011-09-26 11:10             ` NeilBrown
2011-09-27 19:12           ` Marcin M. Jessa
2011-09-27 23:13             ` NeilBrown
2011-09-28  2:50               ` Stan Hoeppner
2011-09-28  7:10                 ` Marcin M. Jessa
2011-09-28  7:51                   ` David Brown
2011-09-28 16:12                   ` Stan Hoeppner
2011-09-28 16:30                     ` Marcin M. Jessa
2011-09-28 18:56                       ` Thomas Fjellstrom
2011-09-28 19:26                         ` Marcin M. Jessa
2011-09-28 19:42                           ` Thomas Fjellstrom
2011-09-28 23:49                     ` NeilBrown
2011-09-29  9:03                       ` David Brown
2011-09-29 15:21                         ` Stan Hoeppner
2011-09-29 17:14                           ` David Brown [this message]
2011-09-29 18:28                       ` Dan Williams
2011-09-29 23:07                         ` NeilBrown
2011-09-30  0:18                           ` Williams, Dan J
2011-10-05  2:15                             ` NeilBrown
2011-09-28 10:38                 ` Michal Soltys
2011-09-28 13:20                   ` Brad Campbell
2011-09-28 19:02                     ` Thomas Fjellstrom
2011-09-28 16:31                   ` Stan Hoeppner
2011-09-28 16:37                     ` Marcin M. Jessa
2011-09-28 19:03                       ` Thomas Fjellstrom
2011-09-28 19:29                         ` Marcin M. Jessa
2011-09-28 19:43                           ` Thomas Fjellstrom
2011-09-30 20:01               ` Marcin M. Jessa
2011-09-30 21:47                 ` Thomas Fjellstrom
2011-09-30 22:30                   ` Marcin M. Jessa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='j6291f$fkq$1@dough.gmane.org' \
    --to=david.brown@hesbynett.no \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).