From: koti <satha_koti@yahoo.co.in>
To: linux-raid@vger.kernel.org
Subject: Request on RAID10
Date: Sat, 26 Jun 2010 16:56:33 +0000 (UTC) [thread overview]
Message-ID: <loom.20100626T184818-212@post.gmane.org> (raw)
Hi Everyone,
We created RAID10 array on 4 disks (physically we had 3 1TB disks as test case
we created 350GB partitions). We got a hang while we are doing the following:
1) remove the disk and add this again. Doing this in while loop.
2) While doing the above, simultaneously read and write on the same array.
At some point of time the recovery going to hang, then the array was not
operational, we are using kernel 2.6.27.
I am new to use the RAID 10 array. Is this scenario was correct? if it is then
what might be the problem, can any body suggest me and direct in proper way. It
is very much useful for proceed further on this.
Thanks,
Koti.
next reply other threads:[~2010-06-26 16:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-26 16:56 koti [this message]
2010-06-29 6:53 ` Request on RAID10 Neil Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20100626T184818-212@post.gmane.org \
--to=satha_koti@yahoo.co.in \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox