RE: [PATCH 7/9] IB/core: generic RDMA READ/WRITE API

["Steve Wise" <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>]

> -----Original Message-----
> From: Sagi Grimberg [mailto:sagig-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org]
> Sent: Tuesday, March 01, 2016 3:20 AM
> To: Christoph Hellwig
> Cc: Steve Wise; linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org; bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org; target-devel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Subject: Re: [PATCH 7/9] IB/core: generic RDMA READ/WRITE API
> 
> 
> >>>> +    if (rdma_rw_use_mr(qp->device, port_num)) {
> >>>> +        ret = rdma_rw_init_mr_wrs(ctx, qp, port_num, sg, sg_offset,
> >>>> +                remote_addr, rkey, dir);
> >>>
> >>> At some point I would like the iWARP IO to do no-mr for WRITE/dma_nents
> >>> == 1, and WRITE/dma_nents <= max_send_sge for the device. I think this
> >>> will help smaller iSER/NVMEF READ IOPs.  I'm testing this out now on the
> >>> NVMEF code, which is slightly different.  If it proves out to better the
> >>> performance, I'll post a follow-on patch...
> >>
> >> Is this possible given that pd->local_dma_lkey has only local
> >> permissions?
> >
> > I think he means NVMe / SCSI READ commands, which use RDMA WRITE.
> > For NVMe / SCSI WRITE commands that use RDMA READ all bets are off
> > for iWarp, but at least it supports READ W/ INVALIDATE.
> 
> I interpreted "no-mr for WRITE/dma_nents == 1" as either RDMA_WRITE of
> RDMA_READ with a single dma entry (and that part I didn't understand).

I mean for iWARP, we can do RDMA WRITE operations w/o a MR, if the ib_sge is small enough given the device max send depth.


--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html