From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: linux-rdma <linux-rdma@vger.kernel.org>
Cc: target-devel <target-devel@vger.kernel.org>,
linux-scsi <linux-scsi@vger.kernel.org>,
Roland Dreier <roland@purestorage.com>,
Bart Van Assche <bvanassche@acm.org>,
Nicholas Bellinger <nab@linux-iscsi.org>
Subject: [PATCH 1/2] ib_srpt: Make srp_max_req_size module parameter use S_IRUGO|S_IWUSR
Date: Sun, 6 Nov 2011 11:15:40 +0000 [thread overview]
Message-ID: <1320578141-27048-1-git-send-email-nab@linux-iscsi.org> (raw)
From: Nicholas Bellinger <nab@linux-iscsi.org>
This patch converts the srp_max_req_size module parameter to R/W access
so that it's accessable when built as CONFIG_INFINIBAND_SRPT=y. This
includes adding srpt_device->max_req_size that is assigned during
srpt_add_one() and referenced directly from there.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
---
drivers/infiniband/ulp/srpt/ib_srpt.c | 20 +++++++++++---------
drivers/infiniband/ulp/srpt/ib_srpt.h | 2 ++
2 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index aae040d..94e6aff 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -79,7 +79,7 @@ static spinlock_t srpt_dev_lock; /* Protects srpt_dev_list. */
static struct list_head srpt_dev_list; /* List of srpt_device structures. */
static unsigned srp_max_req_size = DEFAULT_MAX_REQ_SIZE;
-module_param(srp_max_req_size, int, 0444);
+module_param(srp_max_req_size, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(srp_max_req_size,
"Maximum size of SRP request messages in bytes.");
@@ -361,7 +361,7 @@ static void srpt_get_ioc(struct srpt_port *sport, u32 slot,
iocp->protocol_version = __constant_cpu_to_be16(SRP_PROTOCOL_VERSION);
iocp->send_queue_depth = cpu_to_be16(sdev->srq_size);
iocp->rdma_read_depth = 4;
- iocp->send_size = cpu_to_be32(srp_max_req_size);
+ iocp->send_size = cpu_to_be32(sdev->max_req_size);
iocp->rdma_size = cpu_to_be32(min(sport->port_attrib.srp_max_rdma_size,
1U << 24));
iocp->num_svc_entries = 1;
@@ -786,7 +786,7 @@ static int srpt_post_recv(struct srpt_device *sdev,
wr.wr_id = encode_wr_id(SRPT_RECV, ioctx->ioctx.index);
list.addr = ioctx->ioctx.dma;
- list.length = srp_max_req_size;
+ list.length = sdev->max_req_size;
list.lkey = sdev->mr->lkey;
wr.next = NULL;
@@ -1942,7 +1942,8 @@ static void srpt_handle_new_iu(struct srpt_rdma_ch *ch,
BUG_ON(!recv_ioctx);
ib_dma_sync_single_for_cpu(ch->sport->sdev->device,
- recv_ioctx->ioctx.dma, srp_max_req_size,
+ recv_ioctx->ioctx.dma,
+ ch->sport->sdev->max_req_size,
DMA_FROM_DEVICE);
ch_state = srpt_get_ch_state(ch);
@@ -2490,13 +2491,13 @@ static int srpt_cm_req_recv(struct ib_cm_id *cm_id,
goto out;
}
- if (it_iu_len > srp_max_req_size || it_iu_len < 64) {
+ if (it_iu_len > sdev->max_req_size || it_iu_len < 64) {
rej->reason = __constant_cpu_to_be32(
SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE);
ret = -EINVAL;
printk(KERN_ERR "rejected SRP_LOGIN_REQ because its"
" length (%d bytes) is out of range (%d .. %d)\n",
- it_iu_len, 64, srp_max_req_size);
+ it_iu_len, 64, sdev->max_req_size);
goto reject;
}
@@ -3248,6 +3249,7 @@ static void srpt_add_one(struct ib_device *device)
goto err_pd;
sdev->srq_size = min(srpt_srq_size, sdev->dev_attr.max_srq_wr);
+ sdev->max_req_size = srp_max_req_size;
srq_attr.event_handler = srpt_srq_event;
srq_attr.srq_context = (void *)sdev;
@@ -3292,7 +3294,7 @@ static void srpt_add_one(struct ib_device *device)
sdev->ioctx_ring = (struct srpt_recv_ioctx **)
srpt_alloc_ioctx_ring(sdev, sdev->srq_size,
sizeof(*sdev->ioctx_ring[0]),
- srp_max_req_size, DMA_FROM_DEVICE);
+ sdev->max_req_size, DMA_FROM_DEVICE);
if (!sdev->ioctx_ring)
goto err_event;
@@ -3335,7 +3337,7 @@ out:
err_ring:
srpt_free_ioctx_ring((struct srpt_ioctx **)sdev->ioctx_ring, sdev,
- sdev->srq_size, srp_max_req_size,
+ sdev->srq_size, sdev->max_req_size,
DMA_FROM_DEVICE);
err_event:
ib_unregister_event_handler(&sdev->event_handler);
@@ -3395,7 +3397,7 @@ static void srpt_remove_one(struct ib_device *device)
ib_dealloc_pd(sdev->pd);
srpt_free_ioctx_ring((struct srpt_ioctx **)sdev->ioctx_ring, sdev,
- sdev->srq_size, srp_max_req_size, DMA_FROM_DEVICE);
+ sdev->srq_size, sdev->max_req_size, DMA_FROM_DEVICE);
sdev->ioctx_ring = NULL;
kfree(sdev);
}
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h
index b4b4bbc..6384316 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.h
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.h
@@ -384,6 +384,7 @@ struct srpt_port {
* @dev_attr: Attributes of the InfiniBand device as obtained during the
* ib_client.add() callback.
* @srq_size: SRQ size.
+ * @max_req_size: Max request size set via srp_max_req_size module parameter
* @ioctx_ring: Per-HCA SRQ.
* @rch_list: Per-device channel list -- see also srpt_rdma_ch.list.
* @ch_releaseQ: Enables waiting for removal from rch_list.
@@ -400,6 +401,7 @@ struct srpt_device {
struct ib_cm_id *cm_id;
struct ib_device_attr dev_attr;
int srq_size;
+ int max_req_size
struct srpt_recv_ioctx **ioctx_ring;
struct list_head rch_list;
wait_queue_head_t ch_releaseQ;
--
1.7.2.5
next reply other threads:[~2011-11-06 11:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-06 11:15 Nicholas A. Bellinger [this message]
2011-11-06 11:15 ` [PATCH 2/2] ib_srpt: Make srpt_srq_size module parameter use S_IRUGO|S_IWUSR Nicholas A. Bellinger
2011-11-06 11:40 ` Bart Van Assche
2011-11-06 12:02 ` Nicholas A. Bellinger
2011-11-06 11:46 ` [PATCH 1/2] ib_srpt: Make srp_max_req_size " Bart Van Assche
2011-11-06 12:10 ` Nicholas A. Bellinger
2011-11-06 12:54 ` Bart Van Assche
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320578141-27048-1-git-send-email-nab@linux-iscsi.org \
--to=nab@linux-iscsi.org \
--cc=bvanassche@acm.org \
--cc=linux-rdma@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=roland@purestorage.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox