public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Roland Dreier <roland@kernel.org>
To: Randy Dunlap <rdunlap@xenotime.net>
Cc: linux-rdma@vger.kernel.org, linux-next@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] RDMA/ocrdma: Fix build with IPV6=n
Date: Wed,  2 May 2012 15:51:00 -0700	[thread overview]
Message-ID: <1335999060-23779-1-git-send-email-roland@kernel.org> (raw)
In-Reply-To: <4F9ACFC4.6010002@xenotime.net>

From: Roland Dreier <roland@purestorage.com>

When IPV6 is not enabled:

    ERROR: "register_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined!
    ERROR: "unregister_inet6addr_notifier" [drivers/infiniband/hw/ocrdma/ocrdma.ko] undefined!

Fix this by wrapping the inet6 calls in #ifdef IPV6.  Also make the
ocrdma module depend on (IPV6 || IPV6=n) to forbid the case of modular
ipv6 but built-in ocrdma (which can't work, because ocrdma calls ipv6
functions).

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
---
OK, added this to my tree, should fix this.

Thanks,
  Roland

 drivers/infiniband/hw/ocrdma/Kconfig       |    2 +-
 drivers/infiniband/hw/ocrdma/ocrdma_main.c |   29 ++++++++++++++++++++--------
 2 files changed, 22 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/hw/ocrdma/Kconfig b/drivers/infiniband/hw/ocrdma/Kconfig
index cf99342..b5b6056 100644
--- a/drivers/infiniband/hw/ocrdma/Kconfig
+++ b/drivers/infiniband/hw/ocrdma/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_OCRDMA
 	tristate "Emulex One Connect HCA support"
-	depends on ETHERNET && NETDEVICES && PCI
+	depends on ETHERNET && NETDEVICES && PCI && (IPV6 || IPV6=n)
 	select NET_VENDOR_EMULEX
 	select BE2NET
 	---help---
diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_main.c b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
index 0bc1efb..a20d16e 100644
--- a/drivers/infiniband/hw/ocrdma/ocrdma_main.c
+++ b/drivers/infiniband/hw/ocrdma/ocrdma_main.c
@@ -51,12 +51,6 @@ static DEFINE_SPINLOCK(ocrdma_devlist_lock);
 static DEFINE_IDR(ocrdma_dev_id);
 
 static union ib_gid ocrdma_zero_sgid;
-static int ocrdma_inet6addr_event(struct notifier_block *,
-				  unsigned long, void *);
-
-static struct notifier_block ocrdma_inet6addr_notifier = {
-	.notifier_call = ocrdma_inet6addr_event
-};
 
 static int ocrdma_get_instance(void)
 {
@@ -204,6 +198,8 @@ static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
 	return 0;
 }
 
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+
 static int ocrdma_inet6addr_event(struct notifier_block *notifier,
 				  unsigned long event, void *ptr)
 {
@@ -259,6 +255,12 @@ static int ocrdma_inet6addr_event(struct notifier_block *notifier,
 	return NOTIFY_OK;
 }
 
+static struct notifier_block ocrdma_inet6addr_notifier = {
+	.notifier_call = ocrdma_inet6addr_event
+};
+
+#endif /* IPV6 */
+
 static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
 					      u8 port_num)
 {
@@ -541,23 +543,34 @@ static struct ocrdma_driver ocrdma_drv = {
 	.state_change_handler	= ocrdma_event_handler,
 };
 
+static void ocrdma_unregister_inet6addr_notifier(void)
+{
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+	unregister_inet6addr_notifier(&ocrdma_inet6addr_notifier);
+#endif
+}
+
 static int __init ocrdma_init_module(void)
 {
 	int status;
 
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	status = register_inet6addr_notifier(&ocrdma_inet6addr_notifier);
 	if (status)
 		return status;
+#endif
+
 	status = be_roce_register_driver(&ocrdma_drv);
 	if (status)
-		unregister_inet6addr_notifier(&ocrdma_inet6addr_notifier);
+		ocrdma_unregister_inet6addr_notifier();
+
 	return status;
 }
 
 static void __exit ocrdma_exit_module(void)
 {
 	be_roce_unregister_driver(&ocrdma_drv);
-	unregister_inet6addr_notifier(&ocrdma_inet6addr_notifier);
+	ocrdma_unregister_inet6addr_notifier();
 }
 
 module_init(ocrdma_init_module);
-- 
1.7.9.5

  parent reply	other threads:[~2012-05-02 22:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20120427161146.95422142968526faaff615d4@canb.auug.org.au>
     [not found] ` <20120427161146.95422142968526faaff615d4-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org>
2012-04-27 16:56   ` inux-next: Tree for Apr 27 (infiniband/hw/ocrdma) Randy Dunlap
     [not found]     ` <4F9ACFC4.6010002-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org>
2012-04-27 23:54       ` Roland Dreier
2012-05-02 22:51     ` Roland Dreier [this message]
     [not found]       ` <1335999060-23779-1-git-send-email-roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2012-05-03  0:29         ` [PATCH] RDMA/ocrdma: Fix build with IPV6=n Randy Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1335999060-23779-1-git-send-email-roland@kernel.org \
    --to=roland@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-next@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=rdunlap@xenotime.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox