public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v3 1/1] IPoIB: Improve parent interface p_key handling.
Date: Wed, 11 Jun 2014 14:33:35 -0400	[thread overview]
Message-ID: <1402511615-9425-1-git-send-email-alex.estrin@intel.com> (raw)

With reference to commit c2904141696ee19551f1553944446f23cdd5d95e
(IPoIB: Fix pkey change flow for virtualization environments)
It was noticed that parent interface keeps sending broadcast group
join requests if p_key index 0 is invalid. That creates unnecessary
noise on a fabric:

ib0: multicast join failed for ff12:401b:8000:0000:0000:0000:ffff:ffff,
status -22

Proposed patch re-init resources, then brings interface
up only if p_key idx 0 is valid either on bootup or on PKEY_CHANGE event.
Original code could run multicast task regardless of p_key value,
which we want to avoid.


Reviewed-by: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Signed-off-by: Alex Estrin <alex.estrin-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---

Changes from v2:
Handle pkey change event for a case when interface is down
(pointed out by Erez Shitrit <erezsh-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>).

Changes from v1:
p_key check for 'Invalid' value was moved to
ipoib_pkey_dev_check_presence() that is used now in ipoib_ib_dev_open()
for p_key validation.
Whitespace and format adjusted.

 drivers/infiniband/ulp/ipoib/ipoib_ib.c |   35 ++++++++++++++++++------------
 1 files changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 6a7003d..a2af996 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -52,6 +52,7 @@ MODULE_PARM_DESC(data_debug_level,
 #endif
 
 static DEFINE_MUTEX(pkey_mutex);
+static void ipoib_pkey_dev_check_presence(struct net_device *dev);
 
 struct ipoib_ah *ipoib_create_ah(struct net_device *dev,
 				 struct ib_pd *pd, struct ib_ah_attr *attr)
@@ -669,12 +670,13 @@ int ipoib_ib_dev_open(struct net_device *dev)
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	int ret;
 
-	if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &priv->pkey_index)) {
-		ipoib_warn(priv, "P_Key 0x%04x not found\n", priv->pkey);
-		clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
+	ipoib_pkey_dev_check_presence(dev);
+
+	if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) {
+		ipoib_warn(priv, "P_Key 0x%04x is %s\n", priv->pkey,
+			!(priv->pkey & 0x7fff) ? "Invalid" : "not found");
 		return -1;
 	}
-	set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
 
 	ret = ipoib_init_qp(dev);
 	if (ret) {
@@ -712,9 +714,10 @@ dev_stop:
 static void ipoib_pkey_dev_check_presence(struct net_device *dev)
 {
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
-	u16 pkey_index = 0;
 
-	if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index))
+	if (!(priv->pkey & 0x7fff) ||
+		ib_find_pkey(priv->ca, priv->port, priv->pkey,
+				&priv->pkey_index))
 		clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
 	else
 		set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
@@ -987,15 +990,17 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
 	up_read(&priv->vlan_rwsem);
 
 	if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) {
-		/* for non-child devices must check/update the pkey value here */
-		if (level == IPOIB_FLUSH_HEAVY &&
-		    !test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags))
-			update_parent_pkey(priv);
-		ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
-		return;
+		if (level != IPOIB_FLUSH_HEAVY) {
+			ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n");
+			return;
+		}
 	}
 
 	if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) {
+		/* interface is down. update pkey and leave. */
+		if (level == IPOIB_FLUSH_HEAVY &&
+			!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags))
+			update_parent_pkey(priv);
 		ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_ADMIN_UP not set.\n");
 		return;
 	}
@@ -1038,8 +1043,10 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv,
 		ipoib_ib_dev_down(dev, 0);
 
 	if (level == IPOIB_FLUSH_HEAVY) {
-		ipoib_ib_dev_stop(dev, 0);
-		ipoib_ib_dev_open(dev);
+		if (test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+			ipoib_ib_dev_stop(dev, 0);
+		if (ipoib_ib_dev_open(dev) != 0)
+			return;
 	}
 
 	/*
-- 
1.7.0.7

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2014-06-11 18:33 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-11 18:33 Alex Estrin [this message]
  -- strict thread matches above, loose matches on Subject: below --
2014-06-11 19:21 [PATCH v3 0/1] IPoIB: Improve parent interface p_key handling Alex Estrin
     [not found] ` <20140611191947.31937.75434.stgit-u2TXY/5TJkdZ7WVY1cDZ9q2pdiUAq4bhAL8bYrjMMd8@public.gmane.org>
2014-06-11 19:22   ` [PATCH v3 1/1] " Alex Estrin
     [not found]     ` <20140611192132.31937.30869.stgit-u2TXY/5TJkdZ7WVY1cDZ9q2pdiUAq4bhAL8bYrjMMd8@public.gmane.org>
2014-06-16  6:57       ` Erez Shitrit
2014-06-17  6:02       ` Or Gerlitz
     [not found]         ` <539FD9EA.8030301-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
2014-06-17 13:11           ` Estrin, Alex

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402511615-9425-1-git-send-email-alex.estrin@intel.com \
    --to=alex.estrin-ral2jqcrhueavxtiumwx3w@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox