From: Hans Westgaard Ry <hans.westgaard.ry-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Cc: Hans Westgaard Ry
<hans.westgaard.ry-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
Doug Ledford <dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Sean Hefty <sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Hal Rosenstock
<hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Christoph Lameter <cl-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org>,
Erez Shitrit <erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Or Gerlitz <ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Bart Van Assche
<bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org>,
Yuval Shaia <yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
Haakon Bugge
<haakon.bugge-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
Wei Lin Guay
<wei.lin.guay-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
Chuck Lever <chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
Jason Gunthorpe
<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>,
Haggai Eran <haggaie-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
Matan Barak <matanb-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>,
"open list:INFINIBAND SUBSYSTEM"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: [PATCH v2] IB/ipoib: Add handling for sending of skb with many frags
Date: Wed, 2 Mar 2016 13:44:28 +0100 [thread overview]
Message-ID: <1456922668-24956-1-git-send-email-hans.westgaard.ry@oracle.com> (raw)
In-Reply-To: <1455784674-8412-1-git-send-email-hans.westgaard.ry-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
IPoIB converts skb-fragments to sge adding 1 extra sge when SG is enabled.
Current codepath assumes that the max number of sge a device support
is at least MAX_SKB_FRAGS+1, there is no interaction with upper layers
to limit number of fragments in an skb if a device suports fewer
sges. The assumptions also lead to requesting a fixed number of sge
when IPoIB creates queue-pairs with SG enabled.
A fallback/slowpath is implemented using skb_linearize to
handle cases where the conversion would result in more sges than supported.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Håkon Bugge <haakon.bugge-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Reviewed-by: Wei Lin Guay <wei.lin.guay-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
---
drivers/infiniband/ulp/ipoib/ipoib.h | 2 ++
drivers/infiniband/ulp/ipoib/ipoib_cm.c | 23 +++++++++++++++++++++--
drivers/infiniband/ulp/ipoib/ipoib_ib.c | 18 ++++++++++++++++++
drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 5 ++++-
4 files changed, 45 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index a6f3eab..85be0de 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -244,6 +244,7 @@ struct ipoib_cm_tx {
unsigned tx_tail;
unsigned long flags;
u32 mtu;
+ unsigned max_send_sge;
};
struct ipoib_cm_rx_buf {
@@ -390,6 +391,7 @@ struct ipoib_dev_priv {
int hca_caps;
struct ipoib_ethtool_st ethtool;
struct timer_list poll_timer;
+ unsigned max_send_sge;
};
struct ipoib_ah {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 917e46e..c8ed535 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -710,6 +710,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_tx_buf *tx_req;
int rc;
+ unsigned usable_sge = tx->max_send_sge - !!skb_headlen(skb);
if (unlikely(skb->len > tx->mtu)) {
ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -719,7 +720,23 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
ipoib_cm_skb_too_long(dev, skb, tx->mtu - IPOIB_ENCAP_LEN);
return;
}
-
+ if (skb_shinfo(skb)->nr_frags > usable_sge) {
+ if (skb_linearize(skb) < 0) {
+ ipoib_warn(priv, "skb could not be linearized\n");
+ ++dev->stats.tx_dropped;
+ ++dev->stats.tx_errors;
+ dev_kfree_skb_any(skb);
+ return;
+ }
+ /* Does skb_linearize return ok without reducing nr_frags? */
+ if (skb_shinfo(skb)->nr_frags > usable_sge) {
+ ipoib_warn(priv, "too many frags after skb linearize\n");
+ ++dev->stats.tx_dropped;
+ ++dev->stats.tx_errors;
+ dev_kfree_skb_any(skb);
+ return;
+ }
+ }
ipoib_dbg_data(priv, "sending packet: head 0x%x length %d connection 0x%x\n",
tx->tx_head, skb->len, tx->qp->qp_num);
@@ -1031,7 +1048,8 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_
struct ib_qp *tx_qp;
if (dev->features & NETIF_F_SG)
- attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+ attr.cap.max_send_sge =
+ min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
tx_qp = ib_create_qp(priv->pd, &attr);
if (PTR_ERR(tx_qp) == -EINVAL) {
@@ -1040,6 +1058,7 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_
attr.create_flags &= ~IB_QP_CREATE_USE_GFP_NOIO;
tx_qp = ib_create_qp(priv->pd, &attr);
}
+ tx->max_send_sge = attr.cap.max_send_sge;
return tx_qp;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 5ea0c14..ee7a555 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -540,6 +540,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
struct ipoib_tx_buf *tx_req;
int hlen, rc;
void *phead;
+ unsigned usable_sge = priv->max_send_sge - !!skb_headlen(skb);
if (skb_is_gso(skb)) {
hlen = skb_transport_offset(skb) + tcp_hdrlen(skb);
@@ -563,6 +564,23 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
phead = NULL;
hlen = 0;
}
+ if (skb_shinfo(skb)->nr_frags > usable_sge) {
+ if (skb_linearize(skb) < 0) {
+ ipoib_warn(priv, "skb could not be linearized\n");
+ ++dev->stats.tx_dropped;
+ ++dev->stats.tx_errors;
+ dev_kfree_skb_any(skb);
+ return;
+ }
+ /* Does skb_linearize return ok without reducing nr_frags? */
+ if (skb_shinfo(skb)->nr_frags > usable_sge) {
+ ipoib_warn(priv, "too many frags after skb linearize\n");
+ ++dev->stats.tx_dropped;
+ ++dev->stats.tx_errors;
+ dev_kfree_skb_any(skb);
+ return;
+ }
+ }
ipoib_dbg_data(priv, "sending packet, length=%d address=%p qpn=0x%06x\n",
skb->len, address, qpn);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index d48c5ba..b809c37 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -206,7 +206,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
init_attr.create_flags |= IB_QP_CREATE_NETIF_QP;
if (dev->features & NETIF_F_SG)
- init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+ init_attr.cap.max_send_sge =
+ min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
priv->qp = ib_create_qp(priv->pd, &init_attr);
if (IS_ERR(priv->qp)) {
@@ -233,6 +234,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
priv->rx_wr.next = NULL;
priv->rx_wr.sg_list = priv->rx_sge;
+ priv->max_send_sge = init_attr.cap.max_send_sge;
+
return 0;
out_free_send_cq:
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-03-02 12:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-18 8:37 [PATCH] IB/ipoib: Add handling of skb with many frags Hans Westgaard Ry
[not found] ` <1455784674-8412-1-git-send-email-hans.westgaard.ry-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2016-03-02 12:44 ` Hans Westgaard Ry [this message]
[not found] ` <1456922668-24956-1-git-send-email-hans.westgaard.ry-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2016-03-02 17:03 ` [PATCH v2] IB/ipoib: Add handling for sending " Yuval Shaia
2016-03-03 15:11 ` Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456922668-24956-1-git-send-email-hans.westgaard.ry@oracle.com \
--to=hans.westgaard.ry-qhclzuegtsvqt0dzr+alfa@public.gmane.org \
--cc=bart.vanassche-XdAiOPVOjttBDgjK7y7TUQ@public.gmane.org \
--cc=chuck.lever-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=cl-vYTEC60ixJUAvxtiuMwx3w@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=erezsh-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=haakon.bugge-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=haggaie-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=matanb-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
--cc=sean.hefty-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=wei.lin.guay-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=yuval.shaia-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox