From: Hariprasad Shenai <hariprasad-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
nirranjan-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org,
Hariprasad Shenai
<hariprasad-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org>,
Steve Wise
<swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
Subject: [PATCH net-next 1/7] RDMA/iw_cxgb4: markers_enabled module parameter should be read only once
Date: Fri, 10 Jun 2016 01:05:11 +0530 [thread overview]
Message-ID: <1465500917-18491-2-git-send-email-hariprasad@chelsio.com> (raw)
In-Reply-To: <1465500917-18491-1-git-send-email-hariprasad-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org>
markers_enabled should be read only once during MPA negotiation.
The present code does read markers_enabled twice during negotiation
which results in setting wrong recv/xmit markers if the markers_enabled is
changed in the middle of negotiation.
With this change the markers_enabled is read only once during MPA
negotiation. recv markers are set based on markers enabled module
parameter and xmit markers are set based on markers flag from the
MPA_START_REQ/MPA_START_REP.
Signed-off-by: Steve Wise <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
Signed-off-by: Hariprasad Shenai <hariprasad-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org>
---
drivers/infiniband/hw/cxgb4/cm.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index a3a67216bce6..2ba3403d8101 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -992,9 +992,19 @@ static int send_mpa_req(struct c4iw_ep *ep, struct sk_buff *skb,
mpa = (struct mpa_message *)(req + 1);
memcpy(mpa->key, MPA_KEY_REQ, sizeof(mpa->key));
- mpa->flags = (crc_enabled ? MPA_CRC : 0) |
- (markers_enabled ? MPA_MARKERS : 0) |
- (mpa_rev_to_use == 2 ? MPA_ENHANCED_RDMA_CONN : 0);
+
+ mpa->flags = 0;
+ if (crc_enabled)
+ mpa->flags |= MPA_CRC;
+ if (markers_enabled) {
+ mpa->flags |= MPA_MARKERS;
+ ep->mpa_attr.recv_marker_enabled = 1;
+ } else {
+ ep->mpa_attr.recv_marker_enabled = 0;
+ }
+ if (mpa_rev_to_use == 2)
+ mpa->flags |= MPA_ENHANCED_RDMA_CONN;
+
mpa->private_data_size = htons(ep->plen);
mpa->revision = mpa_rev_to_use;
if (mpa_rev_to_use == 1) {
@@ -1169,8 +1179,11 @@ static int send_mpa_reply(struct c4iw_ep *ep, const void *pdata, u8 plen)
mpa = (struct mpa_message *)(req + 1);
memset(mpa, 0, sizeof(*mpa));
memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key));
- mpa->flags = (ep->mpa_attr.crc_enabled ? MPA_CRC : 0) |
- (markers_enabled ? MPA_MARKERS : 0);
+ mpa->flags = 0;
+ if (ep->mpa_attr.crc_enabled)
+ mpa->flags |= MPA_CRC;
+ if (ep->mpa_attr.recv_marker_enabled)
+ mpa->flags |= MPA_MARKERS;
mpa->revision = ep->mpa_attr.version;
mpa->private_data_size = htons(plen);
@@ -1555,7 +1568,6 @@ static int process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
*/
__state_set(&ep->com, FPDU_MODE);
ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0;
- ep->mpa_attr.recv_marker_enabled = markers_enabled;
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
ep->mpa_attr.version = mpa->revision;
ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
--
2.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-06-09 19:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-09 19:35 [PATCH for-next 0/7] RDMA/iw_cxgb4: Misc. fixes cleanup and low resource fixes Hariprasad Shenai
[not found] ` <1465500917-18491-1-git-send-email-hariprasad-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org>
2016-06-09 19:35 ` Hariprasad Shenai [this message]
2016-06-09 19:35 ` [PATCH net-next 2/7] RDMA/iw_cxgb4: allocate enough space for debugfs "qps" dump Hariprasad Shenai
2016-06-09 19:35 ` [PATCH net-next 3/7] RDMA/iw_cxgb4: clean up c4iw_reject_cr() Hariprasad Shenai
2016-06-09 19:35 ` [PATCH net-next 4/7] RDMA/iw_cxgb4: Add missing error codes for act open cmd Hariprasad Shenai
2016-06-09 19:35 ` [PATCH net-next 5/7] RDMA/iw_cxgb4: Low resource fixes for connection manager Hariprasad Shenai
2016-06-09 19:35 ` [PATCH net-next 6/7] RDMA/iw_cxgb4: Low resource fixes for Memory registration Hariprasad Shenai
2016-06-09 19:35 ` [PATCH net-next 7/7] RDMA/iw_cxgb4: Low resource fixes for Completion queue Hariprasad Shenai
2016-06-23 14:41 ` [PATCH for-next 0/7] RDMA/iw_cxgb4: Misc. fixes cleanup and low resource fixes Doug Ledford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465500917-18491-2-git-send-email-hariprasad@chelsio.com \
--to=hariprasad-ut6up61k2wzbdgjk7y7tuq@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=nirranjan-ut6Up61K2wZBDgjK7y7TUQ@public.gmane.org \
--cc=swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox