From: Leon Romanovsky <leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH rdma-next 0/4] Add packet pacing support for IB verbs
Date: Mon, 31 Oct 2016 12:21:33 +0200 [thread overview]
Message-ID: <1477909297-14491-1-git-send-email-leon@kernel.org> (raw)
When sending from a 10G host to a 1G host, it is easy to overrun the receiver,
leading to packet loss and traffic backing off. Similar problems occur when
a 10G host sends data to a sub-10G virtual circuit, or a 40G host sending
to a 10G host. Packet pacing could control packet injection rate and reduces
network congestion to maximize throughput & minimize network latency.
Packet pacing is a rate limiting and shaping for a QP (SQ for RAW QP), set
and change the rate is done by modifying QP. This series of patch made the
following high level changes:
1. Report rate limit capabilities through user data. Reported capabilities
include: The maximum and minimum rate limit in kbps supported by packet
pacing; Bitmap showing which QP types are supported by packet pacing
operation.
2. Extend modify QP interface for growing attributes. Add rate limit support
to the extended interface.
3. Enable mlx5-based hardware to be able to update the rate limit for
RAW QP packet.
Available in the "topic/packet_pacing" topic branch of this git repo:
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git
Or for browsing:
https://git.kernel.org/cgit/linux/kernel/git/leon/linux-rdma.git/log/?h=topic/packet_pacing
Thanks,
Bodong & Leon
Bodong Wang (4):
IB/mlx5: Report mlx5 packet pacing capabilities when querying device
IB/core: Support rate limit for packet pacing
IB/uverbs: Extend modify_qp and support packet pacing
IB/mlx5: Update the rate limit according to user setting for RAW QP
drivers/infiniband/core/uverbs.h | 1 +
drivers/infiniband/core/uverbs_cmd.c | 178 +++++++++++++++++++++-------------
drivers/infiniband/core/uverbs_main.c | 1 +
drivers/infiniband/core/verbs.c | 2 +
drivers/infiniband/hw/mlx5/main.c | 16 ++-
drivers/infiniband/hw/mlx5/mlx5_ib.h | 1 +
drivers/infiniband/hw/mlx5/qp.c | 71 ++++++++++++--
include/rdma/ib_verbs.h | 2 +
include/uapi/rdma/ib_user_verbs.h | 12 +++
include/uapi/rdma/mlx5-abi.h | 13 +++
10 files changed, 219 insertions(+), 78 deletions(-)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-10-31 10:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-31 10:21 Leon Romanovsky [this message]
[not found] ` <1477909297-14491-1-git-send-email-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-10-31 10:21 ` [PATCH rdma-next 1/4] IB/mlx5: Report mlx5 packet pacing capabilities when querying device Leon Romanovsky
2016-10-31 10:21 ` [PATCH rdma-next 2/4] IB/core: Support rate limit for packet pacing Leon Romanovsky
[not found] ` <1477909297-14491-3-git-send-email-leon-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-11-01 10:06 ` Yuval Shaia
[not found] ` <20161101100607.GB3727-Hxa29pjIrETlQW142y8m19+IiqhCXseY@public.gmane.org>
2016-11-02 15:35 ` Leon Romanovsky
2016-11-09 17:27 ` Hefty, Sean
[not found] ` <1828884A29C6694DAF28B7E6B8A82373AB0A7F70-P5GAC/sN6hkd3b2yrw5b5LfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-11-09 21:00 ` Bodong Wang
2016-10-31 10:21 ` [PATCH rdma-next 3/4] IB/uverbs: Extend modify_qp and support " Leon Romanovsky
2016-10-31 10:21 ` [PATCH rdma-next 4/4] IB/mlx5: Update the rate limit according to user setting for RAW QP Leon Romanovsky
2016-11-08 17:49 ` [PATCH rdma-next 0/4] Add packet pacing support for IB verbs Hefty, Sean
[not found] ` <1828884A29C6694DAF28B7E6B8A82373AB0A7B31-P5GAC/sN6hkd3b2yrw5b5LfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-11-09 6:40 ` Leon Romanovsky
[not found] ` <20161109064009.GE27883-2ukJVAZIZ/Y@public.gmane.org>
2016-11-09 17:06 ` Hefty, Sean
[not found] ` <1828884A29C6694DAF28B7E6B8A82373AB0A7F0A-P5GAC/sN6hkd3b2yrw5b5LfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2016-11-10 7:22 ` Leon Romanovsky
[not found] ` <20161110072242.GC28957-2ukJVAZIZ/Y@public.gmane.org>
2016-11-10 16:07 ` Bodong Wang
2016-11-10 16:47 ` Jason Gunthorpe
[not found] ` <CAFo2czDeGUrA8yYAJ0r5-8q5T=Y=gZojjfHrLqxribZaexmbOA@mail.gmail.com>
[not found] ` <HE1PR0501MB27291D7FD8782D6650C57E5ACABF0@HE1PR0501MB2729.eurprd05.prod.outlook.com>
[not found] ` <DB5PR0501MB19281A8064B283BE35EDE821B0BF0@DB5PR0501MB1928.eurprd05.prod.outlook.com>
[not found] ` <DB5PR0501MB19281A8064B283BE35EDE821B0BF0-1FH/Iesddo5/SeJcUcAJq8DSnupUy6xnnBOFsp37pqbUKgpGm//BTAC/G2K4zDHf@public.gmane.org>
2016-11-15 14:43 ` Rony Efraim
2016-11-17 18:15 ` Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477909297-14491-1-git-send-email-leon@kernel.org \
--to=leon-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).