From: Selvin Xavier <selvin.xavier@broadcom.com>
To: dledford@redhat.com
Cc: linux-rdma@vger.kernel.org,
Michael Chan <michael.chan@broadcom.com>,
David Miller <davem@davemloft.net>,
netdev@vger.kernel.org,
Selvin Xavier <selvin.xavier@broadcom.com>
Subject: [PATCH 03/28] bnxt_en: Move function reset to bnxt_init_one().
Date: Sun, 4 Dec 2016 22:38:07 -0800 [thread overview]
Message-ID: <1480919912-1079-4-git-send-email-selvin.xavier@broadcom.com> (raw)
In-Reply-To: <1480919912-1079-1-git-send-email-selvin.xavier@broadcom.com>
From: Michael Chan <michael.chan@broadcom.com>
Now that MSIX is enabled in bnxt_init_one(), resources may be allocated by
the RDMA driver before the network device is opened. So we cannot do
function reset in bnxt_open() which will clear all the resources.
The proper place to do function reset now is in bnxt_init_one().
If we get AER, we'll do function reset as well.
Cc: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 25 ++++++-------------------
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 -
2 files changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 9178bf8..8b00ef4 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5613,22 +5613,7 @@ int bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
static int bnxt_open(struct net_device *dev)
{
struct bnxt *bp = netdev_priv(dev);
- int rc = 0;
- if (!test_bit(BNXT_STATE_FN_RST_DONE, &bp->state)) {
- rc = bnxt_hwrm_func_reset(bp);
- if (rc) {
- netdev_err(bp->dev, "hwrm chip reset failure rc: %x\n",
- rc);
- rc = -EBUSY;
- return rc;
- }
- /* Do func_reset during the 1st PF open only to prevent killing
- * the VFs when the PF is brought down and up.
- */
- if (BNXT_PF(bp))
- set_bit(BNXT_STATE_FN_RST_DONE, &bp->state);
- }
return __bnxt_open_nic(bp, true, true);
}
@@ -7028,6 +7013,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
goto init_err;
+ rc = bnxt_hwrm_func_reset(bp);
+ if (rc)
+ goto init_err;
+
rc = bnxt_init_int_mode(bp);
if (rc)
goto init_err;
@@ -7069,7 +7058,6 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
- struct bnxt *bp = netdev_priv(netdev);
netdev_info(netdev, "PCI I/O error detected\n");
@@ -7084,8 +7072,6 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
if (netif_running(netdev))
bnxt_close(netdev);
- /* So that func_reset will be done during slot_reset */
- clear_bit(BNXT_STATE_FN_RST_DONE, &bp->state);
pci_disable_device(pdev);
rtnl_unlock();
@@ -7119,7 +7105,8 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
} else {
pci_set_master(pdev);
- if (netif_running(netdev))
+ err = bnxt_hwrm_func_reset(bp);
+ if (!err && netif_running(netdev))
err = bnxt_open(netdev);
if (!err)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 1461355..0ee2cc4 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1021,7 +1021,6 @@ struct bnxt {
unsigned long state;
#define BNXT_STATE_OPEN 0
#define BNXT_STATE_IN_SP_TASK 1
-#define BNXT_STATE_FN_RST_DONE 2
struct bnxt_irq *irq_tbl;
int total_irqs;
--
2.5.5
next prev parent reply other threads:[~2016-12-05 6:38 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 6:38 [PATCH 00/28] Broadcom RoCE Driver (bnxt_re) Selvin Xavier
2016-12-05 6:38 ` [PATCH 02/28] bnxt_en: Enable MSIX early in bnxt_init_one() Selvin Xavier
2016-12-05 6:38 ` Selvin Xavier [this message]
2016-12-05 6:38 ` [PATCH 04/28] bnxt_en: Improve completion ring allocation for VFs Selvin Xavier
2016-12-05 6:38 ` [PATCH 05/28] bnxt_en: Reserve RDMA resources by default Selvin Xavier
2016-12-05 6:38 ` [PATCH 07/28] bnxt_en: Add interface to support RDMA driver Selvin Xavier
[not found] ` <1480919912-1079-1-git-send-email-selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-05 6:38 ` [PATCH 01/28] bnxt_en: Add bnxt_set_max_func_irqs() Selvin Xavier
2016-12-05 16:47 ` David Miller
2016-12-05 17:10 ` Michael Chan
2016-12-05 6:38 ` [PATCH 06/28] bnxt_en: Refactor the driver registration function with firmware Selvin Xavier
2016-12-05 6:38 ` [PATCH 08/28] bnxt_re: Add bnxt_re RoCE driver files Selvin Xavier
[not found] ` <1480919912-1079-9-git-send-email-selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-05 15:16 ` Doug Ledford
[not found] ` <09068db2-1a14-9fbb-074b-4cf000fbddfb-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-06 5:56 ` Selvin Xavier
2016-12-05 6:38 ` [PATCH 09/28] bnxt_re: Introducing autogenerated Host Software Interface(hsi) file Selvin Xavier
[not found] ` <1480919912-1079-10-git-send-email-selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-07 22:32 ` Jonathan Toppins
[not found] ` <9d151718-c357-d1c4-bbe5-5265e6d2b6ca-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-08 9:45 ` Selvin Xavier
2016-12-05 6:38 ` [PATCH 10/28] bnxt_re: register with the NIC driver Selvin Xavier
[not found] ` <1480919912-1079-11-git-send-email-selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-07 23:21 ` Jonathan Toppins
[not found] ` <ad3d577c-760f-c003-394a-d80efe96400c-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-08 9:42 ` Selvin Xavier
2016-12-05 6:38 ` [PATCH 11/28] bnxt_re: Enabling RoCE control path Selvin Xavier
[not found] ` <1480919912-1079-12-git-send-email-selvin.xavier-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-08 16:54 ` Jonathan Toppins
[not found] ` <973d0642-1d06-72d4-bbbd-d360663d287b-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-09 10:50 ` Selvin Xavier
2016-12-05 6:38 ` [PATCH 12/28] bnxt_re: Adding Notification Queue support Selvin Xavier
2016-12-05 6:38 ` [PATCH 13/28] bnxt_re: Support for PD, ucontext and mmap verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 14/28] bnxt_re: Support for query and modify device verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 15/28] bnxt_re: Adding support for port related verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 16/28] bnxt_re: Support for GID " Selvin Xavier
2016-12-05 6:38 ` [PATCH 17/28] bnxt_re: Support for CQ verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 18/28] bnxt_re: Support for AH verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 19/28] bnxt_re: Support memory registration verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 20/28] bnxt_re: Support QP verbs Selvin Xavier
2016-12-05 6:38 ` [PATCH 21/28] bnxt_re: Support post_send verb Selvin Xavier
2016-12-05 6:38 ` [PATCH 22/28] bnxt_re: Support post_recv Selvin Xavier
2016-12-05 6:38 ` [PATCH 23/28] bnxt_re: Support poll_cq verb Selvin Xavier
2016-12-05 6:38 ` [PATCH 24/28] bnxt_re: Handling dispatching of events to IB stack and cleanup during unload Selvin Xavier
2016-12-05 6:38 ` [PATCH 25/28] bnxt_re: Support for DCB Selvin Xavier
2016-12-05 6:38 ` [PATCH 26/28] bnxt_re: Support debugfs Selvin Xavier
2016-12-05 6:38 ` [PATCH 27/28] bnxt_re: Set uverbs command mask Selvin Xavier
2016-12-05 6:38 ` [PATCH 28/28] bnxt_re: Add QP event handling Selvin Xavier
2016-12-05 15:17 ` [PATCH 00/28] Broadcom RoCE Driver (bnxt_re) Doug Ledford
[not found] ` <ee2b9e6f-de43-ab80-d2a7-d431e33c45ba-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-06 5:38 ` Selvin Xavier
2016-12-05 16:51 ` Jason Gunthorpe
[not found] ` <20161205165144.GB24852-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-12-06 6:01 ` Selvin Xavier
[not found] ` <CA+sbYW1sUrv8CBHScMjU7ozBm709-tiVWaynDQK_Dq3AqAfggA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-06 16:34 ` Jason Gunthorpe
[not found] ` <20161206163456.GB28066-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
2016-12-07 11:33 ` Selvin Xavier
2016-12-07 23:33 ` Jonathan Toppins
[not found] ` <a909ae78-ed49-407a-29c7-b86729f356b8-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-08 9:38 ` Selvin Xavier
[not found] ` <CA+sbYW1P4MqsBF14d9ZK_VjV4edU2bh=sLNTVnGs9F3ojF6vWQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-08 21:08 ` Doug Ledford
[not found] ` <cd667d80-cc1b-c8df-07d1-a5e7b9f94c68-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2016-12-08 21:42 ` Jonathan Toppins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480919912-1079-4-git-send-email-selvin.xavier@broadcom.com \
--to=selvin.xavier@broadcom.com \
--cc=davem@davemloft.net \
--cc=dledford@redhat.com \
--cc=linux-rdma@vger.kernel.org \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox