From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, selvin.xavier@broadcom.com,
somnath.kotur@broadcom.com, dledford@redhat.com,
linux-rdma@vger.kernel.org
Subject: [PATCH net-next 3/7] bnxt_en: Move function reset to bnxt_init_one().
Date: Tue, 6 Dec 2016 12:09:34 -0500 [thread overview]
Message-ID: <1481044178-25193-4-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1481044178-25193-1-git-send-email-michael.chan@broadcom.com>
Now that MSIX is enabled in bnxt_init_one(), resources may be allocated by
the RDMA driver before the network device is opened. So we cannot do
function reset in bnxt_open() which will clear all the resources.
The proper place to do function reset now is in bnxt_init_one().
If we get AER, we'll do function reset as well.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 25 ++++++-------------------
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 -
2 files changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 9178bf8..8b00ef4 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5613,22 +5613,7 @@ int bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init)
static int bnxt_open(struct net_device *dev)
{
struct bnxt *bp = netdev_priv(dev);
- int rc = 0;
- if (!test_bit(BNXT_STATE_FN_RST_DONE, &bp->state)) {
- rc = bnxt_hwrm_func_reset(bp);
- if (rc) {
- netdev_err(bp->dev, "hwrm chip reset failure rc: %x\n",
- rc);
- rc = -EBUSY;
- return rc;
- }
- /* Do func_reset during the 1st PF open only to prevent killing
- * the VFs when the PF is brought down and up.
- */
- if (BNXT_PF(bp))
- set_bit(BNXT_STATE_FN_RST_DONE, &bp->state);
- }
return __bnxt_open_nic(bp, true, true);
}
@@ -7028,6 +7013,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
goto init_err;
+ rc = bnxt_hwrm_func_reset(bp);
+ if (rc)
+ goto init_err;
+
rc = bnxt_init_int_mode(bp);
if (rc)
goto init_err;
@@ -7069,7 +7058,6 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
- struct bnxt *bp = netdev_priv(netdev);
netdev_info(netdev, "PCI I/O error detected\n");
@@ -7084,8 +7072,6 @@ static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
if (netif_running(netdev))
bnxt_close(netdev);
- /* So that func_reset will be done during slot_reset */
- clear_bit(BNXT_STATE_FN_RST_DONE, &bp->state);
pci_disable_device(pdev);
rtnl_unlock();
@@ -7119,7 +7105,8 @@ static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
} else {
pci_set_master(pdev);
- if (netif_running(netdev))
+ err = bnxt_hwrm_func_reset(bp);
+ if (!err && netif_running(netdev))
err = bnxt_open(netdev);
if (!err)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 1461355..0ee2cc4 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1021,7 +1021,6 @@ struct bnxt {
unsigned long state;
#define BNXT_STATE_OPEN 0
#define BNXT_STATE_IN_SP_TASK 1
-#define BNXT_STATE_FN_RST_DONE 2
struct bnxt_irq *irq_tbl;
int total_irqs;
--
1.8.3.1
next prev parent reply other threads:[~2016-12-06 17:09 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-06 17:09 [PATCH net-next 0/7] bnxt_en: Add interface to support RDMA driver Michael Chan
2016-12-06 17:09 ` [PATCH net-next 1/7] bnxt_en: Add bnxt_set_max_func_irqs() Michael Chan
[not found] ` <1481044178-25193-1-git-send-email-michael.chan-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-06 17:09 ` [PATCH net-next 2/7] bnxt_en: Enable MSIX early in bnxt_init_one() Michael Chan
[not found] ` <1481044178-25193-3-git-send-email-michael.chan-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2016-12-06 23:55 ` kbuild test robot
2016-12-06 17:09 ` [PATCH net-next 5/7] bnxt_en: Reserve RDMA resources by default Michael Chan
2016-12-06 17:09 ` [PATCH net-next 6/7] bnxt_en: Refactor the driver registration function with firmware Michael Chan
2016-12-06 17:09 ` Michael Chan [this message]
2016-12-06 17:09 ` [PATCH net-next 4/7] bnxt_en: Improve completion ring allocation for VFs Michael Chan
2016-12-06 17:09 ` [PATCH net-next 7/7] bnxt_en: Add interface to support RDMA driver Michael Chan
2016-12-06 22:33 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481044178-25193-4-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=davem@davemloft.net \
--cc=dledford@redhat.com \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=selvin.xavier@broadcom.com \
--cc=somnath.kotur@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox