Linux RDMA and InfiniBand development
 help / color / mirror / Atom feed
From: Weihang Li <liweihang@huawei.com>
To: <dledford@redhat.com>, <jgg@ziepe.ca>
Cc: <leon@kernel.org>, <linux-rdma@vger.kernel.org>, <linuxarm@huawei.com>
Subject: [PATCH v3 for-next] RDMA/hns: Support owner mode doorbell
Date: Tue, 20 Oct 2020 20:04:53 +0800	[thread overview]
Message-ID: <1603195493-22741-1-git-send-email-liweihang@huawei.com> (raw)

From: Lang Cheng <chenglang@huawei.com>

The doorbell needs to store PI information into QPC, so the RoCEE should
wait for the results of storing, that is, it needs two bus operations to
complete a doorbell. When ROCEE is in SDI mode, multiple doorbells may be
interlocked because the RoCEE can only handle bus operations serially. So a
flag to mark if HIP09 is working in SDI mode is added. When the SDI flag is
set, the ROCEE will ignore the PI information of the doorbell, continue to
fetch wqe and verify its validity by it's owner_bit.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
---
Changes since v2:
- Replace wmb() with dma_wmb().
link: https://patchwork.kernel.org/project/linux-rdma/patch/1601199901-41677-1-git-send-email-liweihang@huawei.com/

Changes since v1:
- Fix comments from Leon about the unused enum.
link: https://patchwork.kernel.org/patch/11799327/

 drivers/infiniband/hw/hns/hns_roce_device.h |  4 +++-
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c  | 28 ++++++++++++++++++++++------
 drivers/infiniband/hw/hns/hns_roce_qp.c     |  3 +++
 3 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
index 6d2acff..07c95d8 100644
--- a/drivers/infiniband/hw/hns/hns_roce_device.h
+++ b/drivers/infiniband/hw/hns/hns_roce_device.h
@@ -129,9 +129,10 @@ enum {
 	SERV_TYPE_UD,
 };
 
-enum {
+enum hns_roce_qp_caps {
 	HNS_ROCE_QP_CAP_RQ_RECORD_DB = BIT(0),
 	HNS_ROCE_QP_CAP_SQ_RECORD_DB = BIT(1),
+	HNS_ROCE_QP_CAP_OWNER_DB = BIT(2),
 };
 
 enum hns_roce_cq_flags {
@@ -221,6 +222,7 @@ enum {
 	HNS_ROCE_CAP_FLAG_FRMR                  = BIT(8),
 	HNS_ROCE_CAP_FLAG_QP_FLOW_CTRL		= BIT(9),
 	HNS_ROCE_CAP_FLAG_ATOMIC		= BIT(10),
+	HNS_ROCE_CAP_FLAG_SDI_MODE		= BIT(14),
 };
 
 #define HNS_ROCE_DB_TYPE_COUNT			2
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 6d30850..c284b13 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -474,9 +474,6 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,
 	roce_set_bit(ud_sq_wqe->byte_4, V2_UD_SEND_WQE_BYTE_4_SE_S,
 		     (wr->send_flags & IB_SEND_SOLICITED) ? 1 : 0);
 
-	roce_set_bit(ud_sq_wqe->byte_4, V2_UD_SEND_WQE_BYTE_4_OWNER_S,
-		     owner_bit);
-
 	roce_set_field(ud_sq_wqe->byte_16, V2_UD_SEND_WQE_BYTE_16_PD_M,
 		       V2_UD_SEND_WQE_BYTE_16_PD_S, to_hr_pd(qp->ibqp.pd)->pdn);
 
@@ -517,7 +514,18 @@ static inline int set_ud_wqe(struct hns_roce_qp *qp,
 
 	set_extend_sge(qp, wr, &curr_idx, valid_num_sge);
 
+	/*
+	 * The pipeline can sequentially post all valid WQEs into WQ buffer,
+	 * including new WQEs waiting for the doorbell to update the PI again.
+	 * Therefore, the owner bit of WQE MUST be updated after all fields
+	 * and extSGEs have been written into DDR instead of cache.
+	 */
+	if (qp->en_flags & HNS_ROCE_QP_CAP_OWNER_DB)
+		dma_wmb();
+
 	*sge_idx = curr_idx;
+	roce_set_bit(ud_sq_wqe->byte_4, V2_UD_SEND_WQE_BYTE_4_OWNER_S,
+		     owner_bit);
 
 	return 0;
 }
@@ -591,9 +599,6 @@ static inline int set_rc_wqe(struct hns_roce_qp *qp,
 	roce_set_bit(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_CQE_S,
 		     (wr->send_flags & IB_SEND_SIGNALED) ? 1 : 0);
 
-	roce_set_bit(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_OWNER_S,
-		     owner_bit);
-
 	if (wr->opcode == IB_WR_ATOMIC_CMP_AND_SWP ||
 	    wr->opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
 		set_atomic_seg(wr, rc_sq_wqe, valid_num_sge);
@@ -601,7 +606,18 @@ static inline int set_rc_wqe(struct hns_roce_qp *qp,
 		ret = set_rwqe_data_seg(&qp->ibqp, wr, rc_sq_wqe,
 					&curr_idx, valid_num_sge);
 
+	/*
+	 * The pipeline can sequentially post all valid WQEs into WQ buffer,
+	 * including new WQEs waiting for the doorbell to update the PI again.
+	 * Therefore, the owner bit of WQE MUST be updated after all fields
+	 * and extSGEs have been written into DDR instead of cache.
+	 */
+	if (qp->en_flags & HNS_ROCE_QP_CAP_OWNER_DB)
+		dma_wmb();
+
 	*sge_idx = curr_idx;
+	roce_set_bit(rc_sq_wqe->byte_4, V2_RC_SEND_WQE_BYTE_4_OWNER_S,
+		     owner_bit);
 
 	return ret;
 }
diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c
index 6c081dd..5370b6e 100644
--- a/drivers/infiniband/hw/hns/hns_roce_qp.c
+++ b/drivers/infiniband/hw/hns/hns_roce_qp.c
@@ -725,6 +725,9 @@ static int alloc_qp_db(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp,
 	struct ib_device *ibdev = &hr_dev->ib_dev;
 	int ret;
 
+	if (hr_dev->caps.flags & HNS_ROCE_CAP_FLAG_SDI_MODE)
+		hr_qp->en_flags |= HNS_ROCE_QP_CAP_OWNER_DB;
+
 	if (udata) {
 		if (user_qp_has_sdb(hr_dev, init_attr, udata, resp, ucmd)) {
 			ret = hns_roce_db_map_user(uctx, udata, ucmd->sdb_addr,
-- 
2.8.1


             reply	other threads:[~2020-10-20 12:06 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-20 12:04 Weihang Li [this message]
2020-10-28 16:14 ` [PATCH v3 for-next] RDMA/hns: Support owner mode doorbell Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1603195493-22741-1-git-send-email-liweihang@huawei.com \
    --to=liweihang@huawei.com \
    --cc=dledford@redhat.com \
    --cc=jgg@ziepe.ca \
    --cc=leon@kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox