linux-rdma.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
To: kys@microsoft.com, haiyangz@microsoft.com, wei.liu@kernel.org,
	decui@microsoft.com, andrew+netdev@lunn.ch, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
	longli@microsoft.com, kotaranov@microsoft.com, horms@kernel.org,
	shirazsaleem@microsoft.com, leon@kernel.org,
	ernis@linux.microsoft.com, shradhagupta@linux.microsoft.com,
	schakrabarti@linux.microsoft.com, gerhard@engleder-embedded.com,
	rosenp@gmail.com, sdf@fomichev.me, linux-hyperv@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-rdma@vger.kernel.org
Subject: [PATCH net-next v2 1/4] net: mana: Fix potential deadlocks in mana napi ops
Date: Fri, 13 Jun 2025 04:20:24 -0700	[thread overview]
Message-ID: <1749813627-8377-2-git-send-email-ernis@linux.microsoft.com> (raw)
In-Reply-To: <1749813627-8377-1-git-send-email-ernis@linux.microsoft.com>

When net_shaper_ops are enabled for MANA, netdev_ops_lock
becomes active.

MANA VF setup/teardown by netvsc follows this call chain:

netvsc_vf_setup()
        dev_change_flags()
		...
         __dev_open() OR __dev_close()

dev_change_flags() holds the netdev mutex via netdev_lock_ops.

Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open()
path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(),
napi_enable()), which also try to acquire the same lock, risking
deadlock.

Similarly in the teardown path (mana_close()), netif_napi_disable()
and netif_napi_del(), contend for the same lock.

Switch to the _locked variants of these APIs to avoid deadlocks
when the netdev_ops_lock is held.

Fixes: d4c22ec680c8 ("net: hold netdev instance lock during ndo_open/ndo_stop")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com>
---
Changes in v2:
* Use netdev_lock_ops_to_full() instead of if...else statements for napi
  APIs.
* Edit commit message.
---
 drivers/net/ethernet/microsoft/mana/mana_en.c | 30 +++++++++++++------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
index e68b8190bb7a..ca5e9c3d374b 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_en.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
@@ -1912,8 +1912,11 @@ static void mana_destroy_txq(struct mana_port_context *apc)
 		napi = &apc->tx_qp[i].tx_cq.napi;
 		if (apc->tx_qp[i].txq.napi_initialized) {
 			napi_synchronize(napi);
-			napi_disable(napi);
-			netif_napi_del(napi);
+			netdev_lock_ops_to_full(napi->dev);
+			napi_disable_locked(napi);
+			netif_napi_del_locked(napi);
+			netdev_unlock_full_to_ops(napi->dev);
 			apc->tx_qp[i].txq.napi_initialized = false;
 		}
 		mana_destroy_wq_obj(apc, GDMA_SQ, apc->tx_qp[i].tx_object);
@@ -2065,8 +2068,11 @@ static int mana_create_txq(struct mana_port_context *apc,
 
 		mana_create_txq_debugfs(apc, i);
 
-		netif_napi_add_tx(net, &cq->napi, mana_poll);
-		napi_enable(&cq->napi);
+		set_bit(NAPI_STATE_NO_BUSY_POLL, &cq->napi.state);
+		netdev_lock_ops_to_full(net);
+		netif_napi_add_locked(net, &cq->napi, mana_poll);
+		napi_enable_locked(&cq->napi);
+		netdev_unlock_full_to_ops(net);
 		txq->napi_initialized = true;
 
 		mana_gd_ring_cq(cq->gdma_cq, SET_ARM_BIT);
@@ -2102,9 +2108,11 @@ static void mana_destroy_rxq(struct mana_port_context *apc,
 	if (napi_initialized) {
 		napi_synchronize(napi);
 
-		napi_disable(napi);
-
-		netif_napi_del(napi);
+		netdev_lock_ops_to_full(napi->dev);
+		napi_disable_locked(napi);
+		netif_napi_del_locked(napi);
+		netdev_unlock_full_to_ops(napi->dev);
 	}
 	xdp_rxq_info_unreg(&rxq->xdp_rxq);
 
@@ -2355,14 +2363,18 @@ static struct mana_rxq *mana_create_rxq(struct mana_port_context *apc,
 
 	gc->cq_table[cq->gdma_id] = cq->gdma_cq;
 
-	netif_napi_add_weight(ndev, &cq->napi, mana_poll, 1);
+	netdev_lock_ops_to_full(ndev);
+	netif_napi_add_weight_locked(ndev, &cq->napi, mana_poll, 1);
+	netdev_unlock_full_to_ops(ndev);
 
 	WARN_ON(xdp_rxq_info_reg(&rxq->xdp_rxq, ndev, rxq_idx,
 				 cq->napi.napi_id));
 	WARN_ON(xdp_rxq_info_reg_mem_model(&rxq->xdp_rxq, MEM_TYPE_PAGE_POOL,
 					   rxq->page_pool));
 
-	napi_enable(&cq->napi);
+	netdev_lock_ops_to_full(ndev);
+	napi_enable_locked(&cq->napi);
+	netdev_unlock_full_to_ops(ndev);
 
 	mana_gd_ring_cq(cq->gdma_cq, SET_ARM_BIT);
 out:
-- 
2.34.1


  reply	other threads:[~2025-06-13 11:20 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-13 11:20 [PATCH net-next v2 0/4] Support bandwidth clamping in mana using net shapers Erni Sri Satya Vennela
2025-06-13 11:20 ` Erni Sri Satya Vennela [this message]
2025-06-13 17:01   ` [PATCH net-next v2 1/4] net: mana: Fix potential deadlocks in mana napi ops Long Li
2025-06-13 11:20 ` [PATCH net-next v2 2/4] net: mana: Add support for net_shaper_ops Erni Sri Satya Vennela
2025-06-13 17:04   ` Long Li
2025-06-13 11:20 ` [PATCH net-next v2 3/4] net: mana: Add speed support in mana_get_link_ksettings Erni Sri Satya Vennela
2025-06-13 11:20 ` [PATCH net-next v2 4/4] net: mana: Handle unsupported HWC commands Erni Sri Satya Vennela
2025-06-14 20:03 ` [PATCH net-next v2 0/4] Support bandwidth clamping in mana using net shapers Jakub Kicinski
2025-06-17  6:16   ` Erni Sri Satya Vennela

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1749813627-8377-2-git-send-email-ernis@linux.microsoft.com \
    --to=ernis@linux.microsoft.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=decui@microsoft.com \
    --cc=edumazet@google.com \
    --cc=gerhard@engleder-embedded.com \
    --cc=haiyangz@microsoft.com \
    --cc=horms@kernel.org \
    --cc=kotaranov@microsoft.com \
    --cc=kuba@kernel.org \
    --cc=kys@microsoft.com \
    --cc=leon@kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=longli@microsoft.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=rosenp@gmail.com \
    --cc=schakrabarti@linux.microsoft.com \
    --cc=sdf@fomichev.me \
    --cc=shirazsaleem@microsoft.com \
    --cc=shradhagupta@linux.microsoft.com \
    --cc=wei.liu@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).