From: Eli Cohen <eli-VPRAkNaXOzVS1MOuV/RT9w@public.gmane.org>
To: Roland Dreier <rdreier-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
Cc: Linux RDMA list
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
general-list
<general-ZwoEplunGu1OwGhvXhtEPSCwEArCW2h5@public.gmane.org>,
ewg <ewg-ZwoEplunGu1OwGhvXhtEPSCwEArCW2h5@public.gmane.org>
Subject: [PATCH] mlx4: remove limitation on LSO header size
Date: Wed, 30 Sep 2009 11:07:01 +0200 [thread overview]
Message-ID: <20090930090701.GA2385@mtls03> (raw)
Current code has a limitation as for the size of an LSO header not allowed to
cross a 64 byte boundary. This patch removes this limitation by setting the WQE
RR for large headers thus allowing LSO headers of any size. The extra buffer
reserved for MLX4_IB_QP_LSO QPs has been doubled, from 64 to 128 bytes,
assuming this is reasonable upper limit to header length.
Also, this patch will cause IB_DEVICE_UD_TSO to be set only of FW versions that
set MLX4_DEV_CAP_FLAG_BLH; e.g. FW version 2.6.000 and higher.
Signed-off-by: Eli Cohen <eli-VPRAkNaXOzVS1MOuV/RT9w@public.gmane.org>
---
drivers/infiniband/hw/mlx4/main.c | 2 +-
drivers/infiniband/hw/mlx4/qp.c | 17 +++++++----------
include/linux/mlx4/device.h | 1 +
3 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 3cb3f47..e596537 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -103,7 +103,7 @@ static int mlx4_ib_query_device(struct ib_device *ibdev,
props->device_cap_flags |= IB_DEVICE_UD_AV_PORT_ENFORCE;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
props->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
- if (dev->dev->caps.max_gso_sz)
+ if (dev->dev->caps.max_gso_sz && dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BLH)
props->device_cap_flags |= IB_DEVICE_UD_TSO;
if (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_RESERVED_LKEY)
props->device_cap_flags |= IB_DEVICE_LOCAL_DMA_LKEY;
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 219b103..1b356cf 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -261,7 +261,7 @@ static int send_wqe_overhead(enum ib_qp_type type, u32 flags)
case IB_QPT_UD:
return sizeof (struct mlx4_wqe_ctrl_seg) +
sizeof (struct mlx4_wqe_datagram_seg) +
- ((flags & MLX4_IB_QP_LSO) ? 64 : 0);
+ ((flags & MLX4_IB_QP_LSO) ? 128 : 0);
case IB_QPT_UC:
return sizeof (struct mlx4_wqe_ctrl_seg) +
sizeof (struct mlx4_wqe_raddr_seg);
@@ -1467,16 +1467,11 @@ static void __set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg)
static int build_lso_seg(struct mlx4_wqe_lso_seg *wqe, struct ib_send_wr *wr,
struct mlx4_ib_qp *qp, unsigned *lso_seg_len,
- __be32 *lso_hdr_sz)
+ __be32 *lso_hdr_sz, int *blh)
{
unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
- /*
- * This is a temporary limitation and will be removed in
- * a forthcoming FW release:
- */
- if (unlikely(halign > 64))
- return -EINVAL;
+ *blh = unlikely(halign > 64) ? 1 : 0;
if (unlikely(!(qp->flags & MLX4_IB_QP_LSO) &&
wr->num_sge > qp->sq.max_gs - (halign >> 4)))
@@ -1523,6 +1518,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
__be32 *lso_wqe;
__be32 uninitialized_var(lso_hdr_sz);
int i;
+ int blh = 0;
spin_lock_irqsave(&qp->sq.lock, flags);
@@ -1616,7 +1612,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
if (wr->opcode == IB_WR_LSO) {
- err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz);
+ err = build_lso_seg(wqe, wr, qp, &seglen, &lso_hdr_sz, &blh);
if (unlikely(err)) {
*bad_wr = wr;
goto out;
@@ -1687,7 +1683,8 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
}
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
- (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0);
+ (ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) |
+ (blh ? cpu_to_be32(1 << 6) : 0);
stamp = ind + qp->sq_spare_wqes;
ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index ce7cc6c..e92d1bf 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -61,6 +61,7 @@ enum {
MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR = 1 << 8,
MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR = 1 << 9,
MLX4_DEV_CAP_FLAG_DPDP = 1 << 12,
+ MLX4_DEV_CAP_FLAG_BLH = 1 << 15,
MLX4_DEV_CAP_FLAG_MEM_WINDOW = 1 << 16,
MLX4_DEV_CAP_FLAG_APM = 1 << 17,
MLX4_DEV_CAP_FLAG_ATOMIC = 1 << 18,
--
1.6.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2009-09-30 9:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-30 9:07 Eli Cohen [this message]
2009-10-07 22:45 ` [PATCH] mlx4: remove limitation on LSO header size Roland Dreier
[not found] ` <adaocoiombn.fsf-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
2009-10-11 10:00 ` Eli Cohen
2009-10-12 17:03 ` Roland Dreier
[not found] ` <4AC858E0.2010506@voltaire.com>
[not found] ` <4AC858E0.2010506-smomgflXvOZWk0Htik3J/w@public.gmane.org>
2009-10-11 9:47 ` [ewg] " Eli Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090930090701.GA2385@mtls03 \
--to=eli-vpraknaxozvs1mouv/rt9w@public.gmane.org \
--cc=ewg-ZwoEplunGu1OwGhvXhtEPSCwEArCW2h5@public.gmane.org \
--cc=general-ZwoEplunGu1OwGhvXhtEPSCwEArCW2h5@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rdreier-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox