public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Hal Rosenstock <hnrose-Wuw85uim5zDR7s880joybQ@public.gmane.org>
To: sashak-smomgflXvOZWk0Htik3J/w@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] opensm/osm_mcast_tbl.(h c): Change max_mlid_ho to be maximum MLID configured
Date: Fri, 16 Oct 2009 10:57:13 -0400	[thread overview]
Message-ID: <20091016145713.GA19268@comcast.net> (raw)


rather than max table size

Signed-off-by: Hal Rosenstock <hal.rosenstock-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
diff --git a/opensm/include/opensm/osm_mcast_tbl.h b/opensm/include/opensm/osm_mcast_tbl.h
index 710d199..276b7f7 100644
--- a/opensm/include/opensm/osm_mcast_tbl.h
+++ b/opensm/include/opensm/osm_mcast_tbl.h
@@ -2,6 +2,7 @@
  * Copyright (c) 2004, 2005 Voltaire, Inc. All rights reserved.
  * Copyright (c) 2002-2005 Mellanox Technologies LTD. All rights reserved.
  * Copyright (c) 1996-2003 Intel Corporation. All rights reserved.
+ * Copyright (c) 2009 HNR Consulting. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
@@ -95,7 +96,8 @@ typedef struct osm_mcast_fwdbl {
 *		Number of entries in the table (aka number of MLIDs supported).
 *
 *	max_mlid_ho
-*		Maximum MLID value (host order).
+*		Maximum MLID (host order) configured in the multicast port mask
+*		table.
 *
 *	pp_mask_tbl
 *		Pointer to a two dimensional array of port_masks for this switch.
diff --git a/opensm/opensm/osm_mcast_tbl.c b/opensm/opensm/osm_mcast_tbl.c
index d7c9529..bdea416 100644
--- a/opensm/opensm/osm_mcast_tbl.c
+++ b/opensm/opensm/osm_mcast_tbl.c
@@ -81,8 +81,6 @@ ib_api_status_t osm_mcast_tbl_init(IN osm_mcast_tbl_t * p_tbl,
 						IB_MCAST_BLOCK_SIZE) /
 					IB_MCAST_BLOCK_SIZE) - 1);
 
-	p_tbl->max_mlid_ho = (uint16_t) (IB_LID_MCAST_START_HO + capacity - 1);
-
 	/*
 	   The number of bytes needed in the mask table is:
 	   The (maximum bit mask 'position' + 1) times the
@@ -122,7 +120,8 @@ void osm_mcast_tbl_set(IN osm_mcast_tbl_t * p_tbl, IN uint16_t mlid_ho,
 
 	CL_ASSERT(p_tbl);
 	CL_ASSERT(mlid_ho >= IB_LID_MCAST_START_HO);
-	CL_ASSERT(mlid_ho <= p_tbl->max_mlid_ho);
+	CL_ASSERT(mlid_ho <= (uint16_t) (IB_LID_MCAST_START_HO +
+					 p_tbl->num_entries - 1));
 	CL_ASSERT(p_tbl->p_mask_tbl);
 
 	mlid_offset = mlid_ho - IB_LID_MCAST_START_HO;
@@ -134,6 +133,8 @@ void osm_mcast_tbl_set(IN osm_mcast_tbl_t * p_tbl, IN uint16_t mlid_ho,
 
 	if (block_num > p_tbl->max_block_in_use)
 		p_tbl->max_block_in_use = (uint16_t) block_num;
+	if (mlid_ho > p_tbl->max_mlid_ho)
+		p_tbl->max_mlid_ho = mlid_ho;
 }
 
 /**********************************************************************
@@ -151,7 +152,8 @@ boolean_t osm_mcast_tbl_is_port(IN const osm_mcast_tbl_t * p_tbl,
 		CL_ASSERT(port_num <=
 			  (p_tbl->max_position + 1) * IB_MCAST_MASK_SIZE);
 		CL_ASSERT(mlid_ho >= IB_LID_MCAST_START_HO);
-		CL_ASSERT(mlid_ho <= p_tbl->max_mlid_ho);
+		CL_ASSERT(mlid_ho <= (uint16_t) (IB_LID_MCAST_START_HO +
+						 p_tbl->num_entries - 1));
 
 		mlid_offset = mlid_ho - IB_LID_MCAST_START_HO;
 		mask_offset = port_num / IB_MCAST_MASK_SIZE;
@@ -178,7 +180,8 @@ boolean_t osm_mcast_tbl_is_any_port(IN const osm_mcast_tbl_t * p_tbl,
 
 	if (p_tbl->p_mask_tbl) {
 		CL_ASSERT(mlid_ho >= IB_LID_MCAST_START_HO);
-		CL_ASSERT(mlid_ho <= p_tbl->max_mlid_ho);
+		CL_ASSERT(mlid_ho <= (uint16_t) (IB_LID_MCAST_START_HO +
+						 p_tbl->num_entries - 1));
 
 		mlid_offset = mlid_ho - IB_LID_MCAST_START_HO;
 
@@ -210,7 +213,8 @@ ib_api_status_t osm_mcast_tbl_set_block(IN osm_mcast_tbl_t * p_tbl,
 
 	mlid_start_ho = (uint16_t) (block_num * IB_MCAST_BLOCK_SIZE);
 
-	if (mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1 > p_tbl->max_mlid_ho)
+	if (mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1 >
+	    p_tbl->num_entries + IB_LID_MCAST_START_HO - 1)
 		return IB_INVALID_PARAMETER;
 
 	for (i = 0; i < IB_MCAST_BLOCK_SIZE; i++)
@@ -219,6 +223,9 @@ ib_api_status_t osm_mcast_tbl_set_block(IN osm_mcast_tbl_t * p_tbl,
 	if (block_num > p_tbl->max_block_in_use)
 		p_tbl->max_block_in_use = (uint16_t) block_num;
 
+	if (mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1 > p_tbl->max_mlid_ho)
+		p_tbl->max_mlid_ho = mlid_start_ho + IB_MCAST_BLOCK_SIZE - 1;
+
 	return IB_SUCCESS;
 }
 
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2009-10-16 14:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-16 14:57 Hal Rosenstock [this message]
     [not found] ` <20091016145713.GA19268-Wuw85uim5zDR7s880joybQ@public.gmane.org>
2009-10-16 18:04   ` [PATCH] opensm/osm_mcast_tbl.(h c): Change max_mlid_ho to be maximum MLID configured Hal Rosenstock

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091016145713.GA19268@comcast.net \
    --to=hnrose-wuw85uim5zdr7s880joybq@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=sashak-smomgflXvOZWk0Htik3J/w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox