From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sasha Khapyorsky Subject: Re: [PATCH] opensm/osm_qos.c: Eliminate unneeded endport SL to VL setup Date: Mon, 25 Jan 2010 19:46:43 +0200 Message-ID: <20100125174643.GW13519@me> References: <20100125132937.GA2053@comcast.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20100125132937.GA2053-Wuw85uim5zDR7s880joybQ@public.gmane.org> Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Hal Rosenstock Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rdma@vger.kernel.org Hi Hal, On 08:29 Mon 25 Jan , Hal Rosenstock wrote: > > when using optimized programming and it's supported by the switch > > Signed-off-by: Hal Rosenstock > --- > diff --git a/opensm/opensm/osm_qos.c b/opensm/opensm/osm_qos.c > index 6bbbfa2..afa454f 100644 > --- a/opensm/opensm/osm_qos.c > +++ b/opensm/opensm/osm_qos.c > @@ -305,6 +305,12 @@ int osm_qos_setup(osm_opensm_t * p_osm) > (&p_node->sw->switch_info)) > continue; > > + if (ib_switch_info_get_opt_sl2vlmapping(&p_node->sw->switch_info) && > + p_osm->sm.p_subn->opt.use_optimized_slvl && > + !memcmp(&swe_config.sl2vl, &sw0_config.sl2vl, > + sizeof(swe_config.sl2vl))) > + continue; > + But then exports sl2vl tables setup loop should be changed starting from port '0' (not '1'), right? Sasha > cfg = &sw0_config; > } else if (osm_node_get_type(p_node) == IB_NODE_TYPE_ROUTER) > cfg = &rtr_config; > -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html