From: Sasha Khapyorsky <sashak-smomgflXvOZWk0Htik3J/w@public.gmane.org>
To: linux-rdma <linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: Eli Dorfman <elid-smomgflXvOZWk0Htik3J/w@public.gmane.org>,
Yevgeny Kliteynik
<kliteyn-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
Subject: [PATCH] infiniband-diags/vendstat: allow multiple config space records
Date: Tue, 25 May 2010 21:13:30 +0300 [thread overview]
Message-ID: <20100525181330.GU28549@me> (raw)
In-Reply-To: <20100524210735.GK28549@me>
Allow to use -R and -W options (config space record access) multiple
number of times, so that multiple config space records will be reading
and/or writing. Using both -R and -W is allowed as well. Example:
vendstat -R 0x12345,0xffff -R 0x12346 -W 0x12347,0,0xfff <lid>
Note that now number of records is effectively limited by 18 (so that it
fit single MAD), this could be increased with using multiple MADs.
Signed-off-by: Sasha Khapyorsky <sashak-smomgflXvOZWk0Htik3J/w@public.gmane.org>
---
infiniband-diags/src/vendstat.c | 69 +++++++++++++++++++++++++-------------
1 files changed, 45 insertions(+), 24 deletions(-)
diff --git a/infiniband-diags/src/vendstat.c b/infiniband-diags/src/vendstat.c
index 0add06c..92a90c8 100644
--- a/infiniband-diags/src/vendstat.c
+++ b/infiniband-diags/src/vendstat.c
@@ -144,25 +144,30 @@ static int do_vendor(ib_portid_t *portid, struct ibmad_port *srcport,
return 0;
}
-static unsigned int conf_addr, conf_val, conf_mask;
-
-static void do_config_space_record(ib_portid_t *portid, unsigned set)
+static void do_config_space_records(ib_portid_t *portid, unsigned set,
+ is3_config_space_t *cs, unsigned records)
{
- is3_config_space_t cs;
-
- memset(&cs, 0, sizeof(cs));
- cs.record[0].address = htonl(conf_addr);
- cs.record[0].data = htonl(conf_val);
- cs.record[0].mask = htonl(conf_mask);
+ unsigned i;
+
+ if (records > 18)
+ records = 18;
+ for (i = 0; i < records; i++) {
+ cs->record[i].address = htonl(cs->record[i].address);
+ cs->record[i].data = htonl(cs->record[i].data);
+ cs->record[i].mask = htonl(cs->record[i].mask);
+ }
if (do_vendor(portid, srcport, IB_MLX_VENDOR_CLASS,
set ? IB_MAD_METHOD_SET : IB_MAD_METHOD_GET,
- IB_MLX_IS3_CONFIG_SPACE_ACCESS, 2 << 22 | 1 << 16, &cs))
- IBERROR("cannot %s config space record", set ? "set" : "get");
-
- printf("Config space record at 0x%x: 0x%x\n",
- ntohl(cs.record[0].address),
- ntohl(cs.record[0].data & cs.record[0].mask));
+ IB_MLX_IS3_CONFIG_SPACE_ACCESS, 2 << 22 | records << 16,
+ cs))
+ IBERROR("cannot %s config space records", set ? "set" : "get");
+
+ for (i = 0; i < records; i++) {
+ printf("Config space record at 0x%x: 0x%x\n",
+ ntohl(cs->record[i].address),
+ ntohl(cs->record[i].data & cs->record[i].mask));
+ }
}
static void counter_groups_info(ib_portid_t * portid, int port)
@@ -224,7 +229,9 @@ static void config_counter_groups(ib_portid_t * portid, int port)
}
static int general_info, xmit_wait, counter_group_info, config_counter_group;
-static unsigned int config_space_read, config_space_write;
+static is3_config_space_t write_cs, read_cs;
+static unsigned write_cs_records, read_cs_records;
+
static int process_opt(void *context, int ch, char *optarg)
{
@@ -246,20 +253,29 @@ static int process_opt(void *context, int ch, char *optarg)
return -1;
break;
case 'R':
- config_space_read = 1;
- ret = sscanf(optarg, "%x,%x", &conf_addr, &conf_mask);
+ if (read_cs_records >= 18)
+ break;
+ ret = sscanf(optarg, "%x,%x",
+ &read_cs.record[read_cs_records].address,
+ &read_cs.record[read_cs_records].mask);
if (ret < 1)
return -1;
else if (ret == 1)
- conf_mask = 0xffffffff;
+ read_cs.record[read_cs_records].mask = 0xffffffff;
+ read_cs_records++;
break;
case 'W':
- config_space_write = 1;
- ret = sscanf(optarg, "%x,%x,%x", &conf_addr, &conf_val, &conf_mask);
+ if (write_cs_records >= 18)
+ break;
+ ret = sscanf(optarg, "%x,%x,%x",
+ &write_cs.record[write_cs_records].address,
+ &write_cs.record[write_cs_records].data,
+ &write_cs.record[write_cs_records].mask);
if (ret < 2)
return -1;
else if (ret == 2)
- conf_mask = 0xffffffff;
+ write_cs.record[write_cs_records].mask = 0xffffffff;
+ write_cs_records++;
break;
default:
return -1;
@@ -329,8 +345,13 @@ int main(int argc, char **argv)
exit(0);
}
- if (config_space_read || config_space_write) {
- do_config_space_record(&portid, config_space_write);
+ if (read_cs_records || write_cs_records) {
+ if (read_cs_records)
+ do_config_space_records(&portid, 0, &read_cs,
+ read_cs_records);
+ if (write_cs_records)
+ do_config_space_records(&portid, 1, &write_cs,
+ write_cs_records);
exit(0);
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2010-05-25 18:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-24 20:56 [PATCH] infiniband-diags/vendstat: code simplifications Sasha Khapyorsky
2010-05-24 21:07 ` [PATCH] infiniband-diags/vendstat: add config space access options Sasha Khapyorsky
2010-05-25 18:13 ` Sasha Khapyorsky [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100525181330.GU28549@me \
--to=sashak-smomgflxvozwk0htik3j/w@public.gmane.org \
--cc=elid-smomgflXvOZWk0Htik3J/w@public.gmane.org \
--cc=kliteyn-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox