From: Steve Wise <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
To: roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] RDMA/cxgb4: Fail RDMA initialization for unsupported cards.
Date: Mon, 01 Aug 2011 16:59:10 -0500 [thread overview]
Message-ID: <20110801215910.9774.75120.stgit@build.ogc.int> (raw)
The iw_cxgb4 module crashes at init time if the T4 card does not
support RDMA. So clean up the init logic to correctly deal with
non-RDMA cards.
- If any RDMA resources are not available, then fail the initializtion
logging an info message.
- Clean up properly on initialization failures.
Signed-off-by: Steve Wise <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
---
drivers/infiniband/hw/cxgb4/device.c | 41 +++++++++++++++++++++++++++-------
1 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index 40a13cc..6d0df6e 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -376,10 +376,8 @@ struct uld_ctx {
struct c4iw_dev *dev;
};
-static void c4iw_remove(struct uld_ctx *ctx)
+static void c4iw_dealloc(struct uld_ctx *ctx)
{
- PDBG("%s c4iw_dev %p\n", __func__, ctx->dev);
- c4iw_unregister_device(ctx->dev);
c4iw_rdev_close(&ctx->dev->rdev);
idr_destroy(&ctx->dev->cqidr);
idr_destroy(&ctx->dev->qpidr);
@@ -389,11 +387,30 @@ static void c4iw_remove(struct uld_ctx *ctx)
ctx->dev = NULL;
}
+static void c4iw_remove(struct uld_ctx *ctx)
+{
+ PDBG("%s c4iw_dev %p\n", __func__, ctx->dev);
+ c4iw_unregister_device(ctx->dev);
+ c4iw_dealloc(ctx);
+}
+
+static int rdma_supported(const struct cxgb4_lld_info *infop)
+{
+ return infop->vr->stag.size > 0 && infop->vr->pbl.size > 0 &&
+ infop->vr->rq.size > 0 && infop->vr->qp.size > 0 &&
+ infop->vr->cq.size > 0 && infop->vr->ocq.size > 0;
+}
+
static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
{
struct c4iw_dev *devp;
int ret;
+ if (!rdma_supported(infop)) {
+ printk(KERN_INFO MOD "%s: RDMA not supported on this device.\n",
+ pci_name(infop->pdev));
+ return ERR_PTR(-ENOSYS);
+ }
devp = (struct c4iw_dev *)ib_alloc_device(sizeof(*devp));
if (!devp) {
printk(KERN_ERR MOD "Cannot allocate ib device\n");
@@ -414,7 +431,6 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
ret = c4iw_rdev_open(&devp->rdev);
if (ret) {
- mutex_unlock(&dev_mutex);
printk(KERN_ERR MOD "Unable to open CXIO rdev err %d\n", ret);
ib_dealloc_device(&devp->ibdev);
return ERR_PTR(ret);
@@ -519,15 +535,24 @@ static int c4iw_uld_state_change(void *handle, enum cxgb4_state new_state)
case CXGB4_STATE_UP:
printk(KERN_INFO MOD "%s: Up\n", pci_name(ctx->lldi.pdev));
if (!ctx->dev) {
- int ret = 0;
+ int ret;
ctx->dev = c4iw_alloc(&ctx->lldi);
- if (!IS_ERR(ctx->dev))
- ret = c4iw_register_device(ctx->dev);
- if (IS_ERR(ctx->dev) || ret)
+ if (IS_ERR(ctx->dev)) {
+ printk(KERN_ERR MOD
+ "%s: initialization failed: %ld\n",
+ pci_name(ctx->lldi.pdev),
+ PTR_ERR(ctx->dev));
+ ctx->dev = NULL;
+ break;
+ }
+ ret = c4iw_register_device(ctx->dev);
+ if (ret) {
printk(KERN_ERR MOD
"%s: RDMA registration failed: %d\n",
pci_name(ctx->lldi.pdev), ret);
+ c4iw_dealloc(ctx);
+ }
}
break;
case CXGB4_STATE_DOWN:
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2011-08-01 21:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-01 21:59 Steve Wise [this message]
[not found] ` <20110801215910.9774.75120.stgit-T4OLL4TyM9aNDNWfRnPdfg@public.gmane.org>
2011-08-22 20:05 ` [PATCH] RDMA/cxgb4: Fail RDMA initialization for unsupported cards Steve Wise
2011-09-20 7:56 ` Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110801215910.9774.75120.stgit@build.ogc.int \
--to=swise-7bpotxp6k4+p2yhjcf5u+vpxobypeauw@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=roland-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox