From: Ira Weiny <weiny2-i2BcT+NCU+M@public.gmane.org>
To: Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
Cc: "linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Subject: Re: [PATCH] infiniband-diags/ibqueryerrors.c: Changes for extended link speeds
Date: Thu, 18 Aug 2011 11:23:23 -0700 [thread overview]
Message-ID: <20110818112323.24eeeee6.weiny2@llnl.gov> (raw)
In-Reply-To: <4E4A50F7.602-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
On Tue, 16 Aug 2011 04:13:59 -0700
Hal Rosenstock <hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org> wrote:
>
> Signed-off-by: Hal Rosenstock <hal-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
Thanks applied,
Ira
> ---
> diff --git a/src/ibqueryerrors.c b/src/ibqueryerrors.c
> index 4677db4..9005fda 100644
> --- a/src/ibqueryerrors.c
> +++ b/src/ibqueryerrors.c
> @@ -3,7 +3,7 @@
> * Copyright (c) 2007 Xsigo Systems Inc. All rights reserved.
> * Copyright (c) 2008 Lawrence Livermore National Lab. All rights reserved.
> * Copyright (c) 2009 HNR Consulting. All rights reserved.
> - * Copyright (c) 2011 Mellanox Technologies LTD. All rights reserved.
> + * Copyright (c) 2010,2011 Mellanox Technologies LTD. All rights reserved.
> *
> * This software is available to you under a choice of one of two
> * licenses. You may choose to be licensed under the terms of the GNU
> @@ -175,6 +175,8 @@ static void get_msg(char *width_msg, char *speed_msg, int msg_size,
> {
> char buf[64];
> uint32_t max_speed = 0;
> + uint32_t cap_mask, rem_cap_mask;
> + uint8_t *info;
>
> uint32_t max_width = get_max(mad_get_field(port->info, 0,
> IB_PORT_LINK_WIDTH_SUPPORTED_F)
> @@ -188,6 +190,21 @@ static void get_msg(char *width_msg, char *speed_msg, int msg_size,
> mad_dump_val(IB_PORT_LINK_WIDTH_ACTIVE_F,
> buf, 64, &max_width));
>
> + if (port->node->type == IB_NODE_SWITCH)
> + info = (uint8_t *)&port->node->ports[0]->info;
> + else
> + info = (uint8_t *)&port->info;
> + cap_mask = mad_get_field(info, 0, IB_PORT_CAPMASK_F);
> + if (port->remoteport->node->type == IB_NODE_SWITCH)
> + info = (uint8_t *)&port->remoteport->node->ports[0]->info;
> + else
> + info = (uint8_t *)&port->remoteport->info;
> + rem_cap_mask = mad_get_field(info, 0, IB_PORT_CAPMASK_F);
> + if (cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS &&
> + rem_cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS)
> + goto check_ext_speed;
> +
> +check_speed_supp:
> max_speed = get_max(mad_get_field(port->info, 0,
> IB_PORT_LINK_SPEED_SUPPORTED_F)
> & mad_get_field(port->remoteport->info, 0,
> @@ -199,6 +216,25 @@ static void get_msg(char *width_msg, char *speed_msg, int msg_size,
> snprintf(speed_msg, msg_size, "Could be %s",
> mad_dump_val(IB_PORT_LINK_SPEED_ACTIVE_F,
> buf, 64, &max_speed));
> + return;
> +
> +check_ext_speed:
> + if (mad_get_field(port->info, 0,
> + IB_PORT_LINK_SPEED_EXT_SUPPORTED_F) == 0 ||
> + mad_get_field(port->remoteport->info, 0,
> + IB_PORT_LINK_SPEED_EXT_SUPPORTED_F) == 0)
> + goto check_speed_supp;
> + max_speed = get_max(mad_get_field(port->info, 0,
> + IB_PORT_LINK_SPEED_EXT_SUPPORTED_F)
> + & mad_get_field(port->remoteport->info, 0,
> + IB_PORT_LINK_SPEED_EXT_SUPPORTED_F));
> + if ((max_speed & mad_get_field(port->info, 0,
> + IB_PORT_LINK_SPEED_EXT_ACTIVE_F)) == 0)
> + // we are not at the max supported extended speed
> + // print what we could be at.
> + snprintf(speed_msg, msg_size, "Could be %s",
> + mad_dump_val(IB_PORT_LINK_SPEED_EXT_ACTIVE_F,
> + buf, 64, &max_speed));
> }
>
> static void print_port_config(char *node_name, ibnd_node_t * node, int portnum)
> @@ -209,7 +245,8 @@ static void print_port_config(char *node_name, ibnd_node_t * node, int portnum)
> char width_msg[256];
> char speed_msg[256];
> char ext_port_str[256];
> - int iwidth, ispeed, istate, iphystate;
> + int iwidth, ispeed, espeed, istate, iphystate, cap_mask;
> + uint8_t *info;
>
> ibnd_port_t *port = node->ports[portnum];
>
> @@ -218,6 +255,16 @@ static void print_port_config(char *node_name, ibnd_node_t * node, int portnum)
>
> iwidth = mad_get_field(port->info, 0, IB_PORT_LINK_WIDTH_ACTIVE_F);
> ispeed = mad_get_field(port->info, 0, IB_PORT_LINK_SPEED_ACTIVE_F);
> + if (port->node->type == IB_NODE_SWITCH)
> + info = (uint8_t *)&port->node->ports[0]->info;
> + else
> + info = (uint8_t *)&port->info;
> + cap_mask = mad_get_field(info, 0, IB_PORT_CAPMASK_F);
> + if (cap_mask & IB_PORT_CAP_HAS_EXT_SPEEDS)
> + espeed = mad_get_field(port->info, 0,
> + IB_PORT_LINK_SPEED_EXT_ACTIVE_F);
> + else
> + espeed = 0;
> istate = mad_get_field(port->info, 0, IB_PORT_STATE_F);
> iphystate = mad_get_field(port->info, 0, IB_PORT_PHYS_STATE_F);
>
> @@ -232,7 +279,9 @@ static void print_port_config(char *node_name, ibnd_node_t * node, int portnum)
> if (istate != IB_LINK_DOWN) {
> snprintf(link_str, 256, "(%3s %9s %6s/%8s)",
> mad_dump_val(IB_PORT_LINK_WIDTH_ACTIVE_F, width, 64, &iwidth),
> - mad_dump_val(IB_PORT_LINK_SPEED_ACTIVE_F, speed, 64, &ispeed),
> + (ispeed != 4 || !espeed) ?
> + mad_dump_val(IB_PORT_LINK_SPEED_ACTIVE_F, speed, 64, &ispeed) :
> + mad_dump_val(IB_PORT_LINK_SPEED_EXT_ACTIVE_F, speed, 64, &espeed),
> mad_dump_val(IB_PORT_STATE_F, state, 64, &istate),
> mad_dump_val(IB_PORT_PHYS_STATE_F, physstate, 64, &iphystate));
> } else {
> @@ -295,7 +344,7 @@ static int suppress(enum MAD_FIELDS field)
> static void report_suppressed(void)
> {
> int i = 0;
> - printf("## Suppresed:");
> + printf("## Suppressed:");
> for (i = 0; i < sup_total; i++)
> printf(" %s", mad_field_name(suppressed_fields[i]));
> printf("\n");
--
Ira Weiny
Math Programmer/Computer Scientist
Lawrence Livermore National Lab
925-423-8008
weiny2-i2BcT+NCU+M@public.gmane.org
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2011-08-18 18:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-16 11:13 [PATCH] infiniband-diags/ibqueryerrors.c: Changes for extended link speeds Hal Rosenstock
[not found] ` <4E4A50F7.602-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2011-08-18 18:23 ` Ira Weiny [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110818112323.24eeeee6.weiny2@llnl.gov \
--to=weiny2-i2bct+ncu+m@public.gmane.org \
--cc=hal-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox