public inbox for linux-rdma@vger.kernel.org
 help / color / mirror / Atom feed
From: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
To: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-next-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Nicholas Bellinger <nab-IzHhD5pYlfBP7FQvKIMDCQ@public.gmane.org>,
	Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>,
	Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
	Randy Dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org>,
	Stephen Rothwell <sfr-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org>
Subject: [PATCH] ib_srpt: Make compilation with BUG=n proceed
Date: Thu, 17 Nov 2011 20:25:44 +0100	[thread overview]
Message-ID: <201111172025.44546.bvanassche@acm.org> (raw)

With CONFIG_BUG=n the __WARN() macro is not defined. Avoid that
building with CONFIG_BUG=n fails by replacing __WARN() with
WARN_ON(true). Also make sure that each such statement is preceeded
by an appropriate pr_err() statement.

Signed-off-by: Bart Van Assche <bvanassche-HInyCGIudOg@public.gmane.org>
Cc: Nicholas Bellinger <nab-IzHhD5pYlfBP7FQvKIMDCQ@public.gmane.org>
Cc: Roland Dreier <roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org>
Cc: Christoph Hellwig <hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>
Cc: Randy Dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org>
Cc: Stephen Rothwell <sfr-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org>
---
 drivers/infiniband/ulp/srpt/ib_srpt.c |   18 +++++++++++-------
 1 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c
index 48b3e19..f09d483 100644
--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1464,9 +1464,9 @@ static void srpt_handle_rdma_comp(struct srpt_rdma_ch *ch,
 	} else if (opcode == SRPT_RDMA_ABORT) {
 		ioctx->rdma_aborted = true;
 	} else {
-		__WARN();
-		printk(KERN_ERR "%s[%d]: scmnd == NULL (opcode %d)", __func__,
-				__LINE__, opcode);
+		pr_err("%s[%d]: unexpected opcode %d", __func__, __LINE__,
+		       opcode);
+		WARN_ON(true);
 	}
 }
 
@@ -2737,7 +2737,9 @@ static void srpt_cm_dreq_recv(struct ib_cm_id *cm_id)
 		break;
 	case CH_DISCONNECTING:
 	case CH_DRAINING:
-		__WARN();
+		pr_err("%s[%d]: unexpected state %d\n", __func__, __LINE__,
+		       ch->state);
+		WARN_ON(true);
 		break;
 	}
 	spin_unlock_irqrestore(&ch->spinlock, flags);
@@ -2966,7 +2968,9 @@ static int srpt_write_pending(struct se_cmd *se_cmd)
 	switch (ch_state) {
 	case CH_CONNECTING:
 		/* This code should never be reached. */
-		__WARN();
+		pr_err("%s[%d]: unexpected state %d\n", __func__, __LINE__,
+		       ch_state);
+		WARN_ON(true);
 		ret = -EINVAL;
 		goto out;
 	case CH_LIVE:
@@ -3030,9 +3034,9 @@ static int srpt_queue_response(struct se_cmd *cmd)
 		ioctx->state = SRPT_STATE_MGMT_RSP_SENT;
 		break;
 	default:
-		printk(KERN_ERR "ch %p; cmd %d: unexpected command state %d\n",
+		pr_err("ch %p; cmd %d: unexpected command state %d\n",
 		       ch, ioctx->ioctx.index, ioctx->state);
-		__WARN();
+		WARN_ON(true);
 		break;
 	}
 	spin_unlock_irqrestore(&ioctx->spinlock, flags);
-- 
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2011-11-17 19:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-17 19:25 Bart Van Assche [this message]
2011-11-17 23:45 ` [PATCH] ib_srpt: Make compilation with BUG=n proceed Roland Dreier
     [not found]   ` <CAL1RGDV+vgQ7J1VtyeGi-eNw00Bxe35xRJgBu0X4-5PAG4q-nQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-11-18  7:52     ` Bart Van Assche
2011-11-18 20:10       ` Roland Dreier
2011-11-19  9:11         ` Bart Van Assche
  -- strict thread matches above, loose matches on Subject: below --
2011-11-18 17:32 Bart Van Assche

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201111172025.44546.bvanassche@acm.org \
    --to=bvanassche-hinycgiudog@public.gmane.org \
    --cc=hch-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
    --cc=linux-next-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=nab-IzHhD5pYlfBP7FQvKIMDCQ@public.gmane.org \
    --cc=rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org \
    --cc=roland-BHEL68pLQRGGvPXPguhicg@public.gmane.org \
    --cc=sfr-3FnU+UHB4dNDw9hX6IcOSA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox