From: Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
To: Husam Kahalah <hkahalah-DMD6N21cJuFWk0Htik3J/w@public.gmane.org>
Cc: linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v1] infiniband-diags/saquery.c: switchinfo support added
Date: Wed, 3 Apr 2013 13:34:28 -0700 [thread overview]
Message-ID: <20130403133428.4ddc9575cfa8e45c56b7f44e@intel.com> (raw)
In-Reply-To: <51583A2D.7040708-DMD6N21cJuFWk0Htik3J/w@public.gmane.org>
Husam,
I had to fix a couple of line wraps in your mailer (see below). But even after that the patch does not apply.
13:10:37 > git am \[PATCH_v1\]__infiniband-diags_saquery.c__switchinfo_support_added.eml
Applying: infiniband-diags/saquery.c: switchinfo support added
error: patch failed: src/saquery.c:481
error: src/saquery.c: patch does not apply
Patch failed at 0001 infiniband-diags/saquery.c: switchinfo support added
When you have resolved this problem run "git am --resolved".
If you would prefer to skip this patch, instead run "git am --skip".
To restore the original branch and stop patching run "git am --abort".
iweiny iqa-136 ~/dev/management/infiniband-diags
13:10:44 > patch -p 1 < \[PATCH_v1\]__infiniband-diags_saquery.c__switchinfo_support_added.eml
patching file src/saquery.c
Hunk #1 FAILED at 481.
Hunk #2 FAILED at 1150.
Hunk #3 FAILED at 1342.
3 out of 3 hunks FAILED -- saving rejects to file src/saquery.c.rej
Could you ensure this is based on the current master branch?
On Sun, 31 Mar 2013 16:29:17 +0300
Husam Kahalah <hkahalah-DMD6N21cJuFWk0Htik3J/w@public.gmane.org> wrote:
>
> Added support to filter SwitchInfoRecords by switch LID
>
> Signed-off-by: Husam kahalah < hkahalah-DMD6N21cJuFWk0Htik3J/w@public.gmane.org>
>
> ---
> src/saquery.c | 55
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 55 insertions(+), 0 deletions(-)
>
> diff --git a/src/saquery.c b/src/saquery.c
> index d31d77d..6390bcd 100644
> --- a/src/saquery.c
> +++ b/src/saquery.c
> @@ -481,6 +481,41 @@ static void dump_service_record(void *data)
> cl_ntoh64(p_sr->service_data64[1]));
> }
>
> +static void dump_switch_info_record(void *data)
> +{
> + ib_switch_info_record_t *p_sir = data;
> +
> + printf("SwitchInfoRecord dump:\n"
> + "\t\tRID\n"
> + "\t\tlid.....................%u\n"
> + "\t\tSwitchInfo dump:\n"
> + "\t\tlin_cap.................0x%X\n"
> + "\t\trand_cap................0x%X\n"
> + "\t\tmcast_cap...............0x%X\n"
> + "\t\tlin_top.................0x%X\n"
> + "\t\tdef_port................%u\n"
> + "\t\tdef_mcast_pri_port......%u\n"
> + "\t\tdef_mcast_not_port......%u\n"
> + "\t\tlife_state..............%u\n"
> + "\t\tlids_per_port...........0x%X\n"
> + "\t\tenforce_cap.............0x%X\n"
> + "\t\tflags...................%u\n"
> + "\t\tmcast_top...............0x%X\n",
> + cl_ntoh16(p_sir->lid),
> + cl_ntoh16(p_sir->switch_info.lin_cap),
> + cl_ntoh16(p_sir->switch_info.rand_cap),
> + cl_ntoh16(p_sir->switch_info.mcast_cap),
> + cl_ntoh16(p_sir->switch_info.lin_top),
> + p_sir->switch_info.def_port,
> + p_sir->switch_info.def_mcast_pri_port,
> + p_sir->switch_info.def_mcast_not_port,
> + p_sir->switch_info.life_state,
> + cl_ntoh16(p_sir->switch_info.lids_per_port),
> + cl_ntoh16(p_sir->switch_info.enforce_cap),
> + p_sir->switch_info.flags,
> + cl_ntoh16(p_sir->switch_info.mcast_top));
> +}
> +
> static void dump_inform_info_record(void *data)
> {
> char gid_str[INET6_ADDRSTRLEN];
> @@ -1150,6 +1185,24 @@ static int query_service_records(const struct
> query_cmd *q, struct sa_handle * h
Line wrap here failed to apply.
> dump_service_record);
> }
>
> +static int query_switchinfo_records(const struct query_cmd *q,
> + struct sa_handle * h, struct query_params *p,
> + int argc, char *argv[])
> +{
> + ib_switch_info_record_t swir;
> + ib_net64_t comp_mask = 0;
> + int lid = 0;
> +
> + if (argc > 0)
> + parse_lid_and_ports(h, argv[0], &lid, NULL, NULL);
> +
> + memset(&swir, 0, sizeof(swir));
> + CHECK_AND_SET_VAL(lid, 16, 0, swir.lid, SWIR, LID);
> +
> + return get_and_dump_any_records(h, IB_SA_ATTR_SWITCHINFORECORD, 0,
> comp_mask,
Line wrap here failed to apply.
Thanks,
Ira
> + &swir, sizeof(swir), dump_switch_info_record);
> +}
> +
> static int query_inform_info_records(const struct query_cmd *q,
> struct sa_handle * h, struct query_params *p,
> int argc, char *argv[])
> @@ -1342,6 +1395,8 @@ static const struct query_cmd query_cmds[] = {
> "[[mlid]/[position]/[block]]", query_mft_records},
> {"GUIDInfoRecord", "GIR", IB_SA_ATTR_GUIDINFORECORD,
> "[[lid]/[block]]", query_guidinfo_records},
> + {"SwitchInfoRecord", "SWIR", IB_SA_ATTR_SWITCHINFORECORD,
> + "[lid]", query_switchinfo_records},
> {0}
> };
>
> --
> 1.7.1
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ira Weiny <ira.weiny-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2013-04-03 20:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-31 13:29 [PATCH v1] infiniband-diags/saquery.c: switchinfo support added Husam Kahalah
[not found] ` <51583A2D.7040708-DMD6N21cJuFWk0Htik3J/w@public.gmane.org>
2013-04-03 20:34 ` Ira Weiny [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130403133428.4ddc9575cfa8e45c56b7f44e@intel.com \
--to=ira.weiny-ral2jqcrhueavxtiumwx3w@public.gmane.org \
--cc=hkahalah-DMD6N21cJuFWk0Htik3J/w@public.gmane.org \
--cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox